Play PS1 Games From PS2 SMB Using Popstarter and OPL Tutorial (2019)

[@joeyhuab]

I followed this exact tutorial and I was finally able to locate my games within OPL! been having trouble the whole afternoon but after following your IPConfigs, it showed my games, especially the PS1 ones! Thank you so much! Subbed!

[@danielmoore3308]

At 14:14 , the option of "PS1 Games display mode" does not exist on any of the versions of OPL I've tried. I've tried 0.9.3 1407, 0.9.3 792 and just 0.9.3. What version are you using? Also the collection of files used link in the description no longer works.

[@Phil-nc4uw]

thank you man for still releasing new content about these old consoles! also ps2 homebrew infos are scarce.

[@iangabrielalcantara7756]

@@ProjectPhoenixMedia My Man!!

[@spaztec]

I don't know if you remember me asking for this a while back but thank you so much man!!!! keep up the good work, Love your vids :)

[@muraterdem7184]

Watching your tutorials since 2014 and I love them. I got immense info on PS2. Thank you for sharing so much. We lost sksapps, emuparadise and others but there are few resources, like you, we can keep our passion alive. Knowledge is power.

[@DatamasterCorporation]

I have been trying to get this to work for a while but I cannot seem to get OPL to see the VCD files at all. I have tried both Space Invaders and GTA II but neither of them work. OPL is able to find PS2 DVD games just fine that are also in the share. Another issue I am seeing is that the artwork is not displaying in OPL even though I have downloaded it through OPL manager. The account the PS2 has full access to the share. I also tried the USB method and I was unable to get it to work.

[@Coldsteak]

same here man, something must have broken within the last 4 years

[@DatamasterCorporation]

@@Coldsteak I did end up getting it to work but it took me a while to find out all the places I missed something. I redid the whole internal drive installation of FHDB, move popstarter back to the hard drive, and redid the server information file. I was running into an issue with that as well since there was a margin in there that popstarter was assuming was part of the user profile name. After those were fixed it worked just fine. All network connected. Sadly the one game I wanted to use with popstarter does work with it at all and I had to find my disk copy of it to play it.

[@AphelionGamingTV]

These tutorials are super helpful, but unfortunately POPStarter always fails to log onto my SMB share. I'm not sure where I went wrong; my PS2 games all work great, and I used those exact network settings for the DAT files. My POPS folder is in the root of my share (with my CD and DVD folders for PS2 games) and contains only POPS_IOX.PAK, POPSTARTER.ELF, and one properly named VCD. My POPSTARTER folder is in the root of my memory card, and POPStarter does try to access my SMB using those settings, which appear correct. I've tried reinstalling a few times, and I've tried with two different SMB shares from different devices; one is password protected, and the other has guest access. Each time I am able to play my PS2 backups just fine, but POPStarter fails to log on at the boot screen when a PS1 game is accessed... Any help would be appreciated!

[@AphelionGamingTV]

@@ProjectPhoenixMedia Thanks for the reply! I was able to get PS1 games working just fine through an SMB share with my Windows PC. I still can not get them going via my FreeNAS server or a drive connected to my modem though. The only reason for this that I can think of has to do with the security protocols these devices allow versus the protocol POPStarter is trying to authenticate with, but I'm not knowledgeable enough to do more than speculate. I dusted off my fat PS2 and everything works perfectly from the HDD thanks to some help from your videos, so I will probably stick with that!

[@warmage247]

@@AphelionGamingTV I'm having this exact issue, I've spent two weeks pulling my hair out trying to diagnose this I have tried everything I can think of it terms of password and such and accounts. I do everything right ps2 games work fine but I always get CONNECTING TO SMB.. LOGON HAS FAILED (0) IM SO DESPERATE PLEASE HELP

[@ZooM18241]

Thank you thank you thank you!!! You made it so simple and I just launched Medievil in about 30 mins on my ps2. I appreciate this tutorial a whole damn lot

[@ProjectPhoenixMedia]

Thanks!!!

[@zweePOP]

Fantastic, thanks! PS1 was the last retro console that I needed to set up for use with my CRT. PS1 games just look so much better on a CRT than they do on my modern-day 1440p monitor, thanks for the tutorial

[@lionheartxiii7122]

Fr the true 240p is amazing on crt

[@fartrellcluggins930]

I love you for this. i finally got it just now. The ps2 smb mod us ultimate now. This is incredible Thankyou so much

[@DaAmazinStaplr]

Running into an issue. My PS2 games from your other tutorial work and load fine. The PS1 games however aren't. Running OPL will automatically open the PS2 games, but if I flip over to the PS1 games, they won't show up until I hit refresh, and if I try to load them it fails to connect to smb. Think it's an issue with the network settings? Figured it out, I mistyped my PC's IP address!

[@Coldsteak]

i followed this tutorial to a T, and I cant get them to show up on my SMB

[@poltergijstt]

So for me everything is going well, I can play PS2 games over SMB no problem and I have put the Popstarter files where they are supposed to be. The thing is that when I open OPL I don't have the option to choose PS1 games at all, it's just not there like with you. Am I forgetting something?

[@ProjectPhoenixMedia]

This older video had used an OPL daily build from ps2-home.com. Most people now prefer the "official" version from github, which does not have the PS1 tab in there.

[@poltergijstt]

@@ProjectPhoenixMedia Thank you for your response, in the meantime I actually got it working myself, but found out that due to me using a certain kind of converter that doesn't support the PS1 resolution, even with GSM, it still won't work. So yeah, fortunately can still play these games on an emulator

[@matiaspetcoff9501]

I love the way you explain everything! Thank you so much! It was so helpful!!!

[@standike8471]

I am getting couldn't find mc/POPSTARTER/SMBCONFIG. Please what could be the problem, I can see my games but once I click to run, it shows the above error. Please help

[@Kteeep]

Is there some setting like the ETH prefix path in Popstarter? I'm using a USB drive in my router as a NAS but I can't share the drive directly. My folder is at \ outer\NAS\MyUSB\POPS but I can only share \ outer\NAS in my routers settings. So my OPL ETH prefix path is just 'MyUSB'. Sadly I can't move the POPS folder in the root of the share or change the shared folder. Did anybody encounter this and found a solution?

[@ProjectPhoenixMedia]

I don't have a router like that so can't comment on workaround or fixes. Even my little 30 dollar travel nano router seems to be more flexible than what you got which is interesting. Might be good question to post at ps2-home.com forums for ideas or workarounds.

[@NervousNoodles]

Awesome! Been waiting for this! Thanks so much!

[@RhystleMania]

I've spent hours and followed every step (apart from the OPL manager part) and cannot get the PS1 games to show up at all. I play PS2 games over SMB and they all display fine, checked several times that the IP is correct, and set up the file structure exactly as shown. I have also tried the USB method which also doesn't work for me, which leads me to believe it is not a network issue (as I said PS2 SMB setup works fine) but rather some issue with Popstarter or The VCD files. I have seen other tutorials with an extra step that the game must follow a naming convention, or that the VCD must be renamed to a .ELF file. Are these extra steps that aren't in the video necessary? I also not my launcher is uLauncherELF while the one you suggest is wLauncherELF, would this make a difference at all? Any help would be hugely appreciated.

[@ProjectPhoenixMedia]

SMB for whatever reason clicks well for some users and for others not. The question is the OPL you are using supports popstarter natively or not, because there are two different branches of OPL and two different devs with different philosophies. In the meantime, I love this wiki and check it out, it may help you in the meantime: bitbucket.org/ShaolinAssassin/popstarter-documentation-stuff/wiki/smb-mode

[@Phil-nc4uw]

seeing you have 10.x.x.x as the first octet, are you sure you're NETMASK isn't supposed to be 255.0.0.0?

[@vvorldnewsmedia]

the ps2 home site i cant get on the web site if i us a vpn it blocks me says im a hacker and when i turn it of i get a error 503 you all have this ?

[@Thislexya]

Do I have to redownload the popstarter elf and rename itevery time I put a ps1 game in the pops folder

[@minionkeys9280]

It doesn't work for me. Upon booting my game, it boots me straight back to the memory card browser

[@wanderingsoul621]

Same!

[@ProjectPhoenixMedia]

Check the ps2-home.com guide or bitbucket website.

[@GT0NY]

Solved!!! The same issue. Yey!!! Finally i got this work! But before i describe what i've changed i should clarify what was the trouble. I am using Modbo 4 PS2 (9000), connected it that way (PS2> Router> PC) Already settled SMB for PS2 games but couldn't play SMB PS1. It was USB PS1 = OK USB PS2 = OK SMB PS1 = NOT WORKED SMB PS2 =OK It booted till words connected but POPStarter shows no error and kicks out to the OSD menu after opening the POPS folder. I changed a lot of steps at the same time to get this work. Perhaps the main trouble was POPS incompatibility with OPL's (conf_elm.cfg) file. 1)I deleted all the (conf_elm.cfg) files. Before the trouble solved i used OPL_971 that needed this file to see games. 2)(Step to play through an OPL) I installed a second OPL_1875 on Usb(IT's big). Then i did the steps what this video guy did 7.24 with the "OPl Manager" to change game name to add SONY ID OPL to could see our POPS games. 2.5) Not sure if this step was needed but anyway. I changed all the VCD file names on PC to be without spaces and only capital letters as like SLUS_006.43.ROGUETRIP.VCD and short enough to be less than 32 symbols. 3) Not necessary step but makes it easier to check the result and exclude OPL influence. I created an SB.SLUS_006.43.ROGUETRIP.ELF file on my USB Flash drive for PS2. This step becomes essential if you are not going to use an OPL and wanna launch it with a uLaunchELF. 4)Not sure if it makes difference but i did this step as well. In the SMBCONFIG.DAT i typed login and password i use in my PC. 5) And this step i believe is important. PC ip in DAT files. You to understand my: Router IP = 192.168.2.1 PC IP = 192.168.2.10 PS2 IP = 192.168.2.11 And settled SMBCONFIG.DAT as: 192.168.2.10 PS 2 GTONY Password And IPCONFIG.DAT 192.168.2.11 255.255.255.0 192.168.2.10 After these steps your SMB PS1 games should start work. And some afterwords. Couple things that thought was the cause of problems but they were not. I thought i need another POPSTARTER.ELF but not, there is two revisions i found on a web: older one is modified 20.10.2017, and newer one is 05.06.2019 but they both work well with SMB. And second thought was network_modules but they are all the same.

[@NickeP86]

What type of TV are you using?

[@zachevans5962]

Hey could I do all of this but put the data/files/games on a USB stick connected to a raspberry pi like in that one PS2 OPL SMB tutorial? And if so could I use the same pi but a different USB stick for PS1 and PS2 games?

[@ProjectPhoenixMedia]

Yea you could if that is what you want to do.

[@jensheinke1344]

Hey my friend. I am trying to get this to work since 2 days. Everything works fine until a specific moment. Ps2 works finde over smb, ps1 games get shown. Everything alright. But when popstarter tries to load the game, it gets stuck at some Moment and says "no ps1 cdrom" and thats about it. I tried many other vcds, even ones from people on the Internet that work for them. There is literally NOONE on the Internet mentioning this error. Any idea?

[@ommommo]

12:56 why does it need to copy another BOOT.ELF file here? would it affect an existing FunTuna boot folder?

[@ProjectPhoenixMedia]

The files I copy over happened to have BOOT.ELF. No need to overwrite if you want to use the existing

[@dylanerenu111]

When i run some ps1 game it says "smb logon has fallied" Somebody Please Help.

[@ampecsu]

6:41 but I have a username and password set up on my opl already for ps2 smb. do i still delete it??

[@ampecsu]

its needed@@ProjectPhoenixMedia

[@hiduracell]

nope just put the username and password there

[@Soullessrun]

i have everything setup right from what i can see but every time i press play it start to load popstarter and on SMB connecting it just say LOGON failed. and just quit. don't know what's with that.

[@ProjectPhoenixMedia]

bitbucket.org/ShaolinAssassin/popstarter-documentation-stuff/wiki/Home Check the wiki, and on windows make sure smbv1 is enabled too that will help with smb share

[@mydasmurray]

Really crazy I want to play HELLNIGHT and when I burn it to disc the aspect ratio is off with no way to fix. Then when I load it in Ps2psxE for some reason the letters are all jumbled in the text when I'm picking up items etc it's completely unreadable with some audio error too. (But the screen is ok) now my last bet is popstarter, this is an emulator right? In OPL I can't get the PS1 games to show in the menu. I put them in the CD folder. Even when I put Ps2 games on using USBUTIL2.2, those games don't show but the under 4gb ones do. So much effort. Hope I can sort it soon, what am I doing wrong here?

[@ProjectPhoenixMedia]

Maybe the gods are not kind with that game and emulation, not sure sorry

[@PradyumnaDasa]

Hey man thanks for the vid. Any idea if you can start a ps1 game without popstarter running through that config boot screen every time?

[@sanjaythumma7537]

Did anybody try the router method to play PS1 games? It can get till the "LOADING POPS" screen but after that it goes into the memory card browse menu.

[@ProjectPhoenixMedia]

My tp link travel router is a router so yes it works. If you can get smb share to work with pc and ps2, then using a router to share the games should work as well.

[@sanjaythumma7537]

@@ProjectPhoenixMedia Maybe I'm missing something in this process. PC to PS2 SMB share of PS1 games worked flawlessly. But now I'm using the simple USB method to play PS1 games, and it just works. Playing Resident Evil 2 Leon, and so far have no issues.

[@GT0NY]

Same here. Did you solve the issue?

[@sanjaythumma7537]

@@GT0NY Not yet. I play from USB to this day. It's just the best method for PS1 games.. hands down.

[@oflanagans1]

Is there a workaround yet to load back into OPL when using the L1+Select+Start shortcut to exit games?

[@damianchristopher8313]

is it possible to copy to and use the popstarter folder from HDD instead of mc0 ? i use FHDB not FMCB.

[@SQ2HDO]

i have problem with ff7 in opl i see game list then i press start show me smb0:pops/sces_008.67.final fantasy (e) (disc 1) [sces-00867' not found

[@ProjectPhoenixMedia]

Use opl manager to fix the file names and then try again.

[@ShindlerReal]

Hello. Do you know if there's a way to fix PS1 games aspect ratio in popstarter? They look slightly squashed, not real 4:3, but more like 5:4 or even more squarely. I have a PAL PS2 running through RetroTink. PS2 games look fine, but PS1 games aspect ratio is not quite right. A little annoying.

[@ProjectPhoenixMedia]

I'm not sure how to fix that, see the popstarter pages at ps2-home or bitbucket for any tips. I am a NTSC user so I can't comment on PAL games and the visual aspect unfortunately

[@ShindlerReal]

@@ProjectPhoenixMedia I can't access ps2-home. They seem to have blocked the whole of Russia (I wrote the ticket to unblock the network, but they don't answer). By the way though I have PAL PS2 I only run NTSC games.

[@ProjectPhoenixMedia]

Could try psx-place as backup

[@amrprofps1424]

Hi is this method possible to do with Dynamic IP with a router in middle of the pc and ps2? thx for ur wondefull guides

[@ProjectPhoenixMedia]

I don't see why not, do some experimenting. Worst case is give ps2 static ip address but in same subnet as router and pc.

[@alusan20raziel]

hi, i have a mini router 3g/4g and i understand that the ps2 usb port is 1.1 version so the games run slowly. my question is.. how could be the configuration to run ps1 games using SMB between the mini router and ps2 , thanks. wainting reply

[@ProjectPhoenixMedia]

It is very good since it is over ethernet and bypass slower usb 1.1 ports

[@aben776]

Thanks, this really help me with the PS1 SMB issue on PS2.

[@johnmcd2076]

how do you change the disc for multi disk games

[@shagstars]

after doing all this still logon 0% failed error when loading ps1 vcds, ps2 iso's load fine.

[@ProjectPhoenixMedia]

bitbucket.org/ShaolinAssassin/popstarter-documentation-stuff/wiki/smb-mode

[@huntermanson7616]

I don't get it. If I use an older or newer OPL I can get PS2 games to run but no PS1, but if I use the exact download he uses in the video I get a black screen - on both a fat and slim PS2. However if I direct run OPL without the Popstation folder on my memory card from my USB the elf will boot. The only thing I am trying to do differently is run it through my network (Router + Switches) vs direct to PC. I have tried off of one of my computers shared to "Everyone" or from my NAS. It seems to perhaps do with something with the Popstation folder perhaps, but I don't really know.

[@huntermanson7616]

Nevermind, I tried a secondary FMCB I have and it appears to work and from my NAS too, don't ask me why - I suppose I'll have more troubleshooting to do.

[@FreeThinker0]

How to set popstarter igr back to opl? Is it from one of the files which have to be copied to the memory card?

[@ProjectPhoenixMedia]

See this: bitbucket.org/ShaolinAssassin/popstarter-documentation-stuff/wiki/igr

[@FreeThinker0]

@@ProjectPhoenixMedia ah so popstarter igr only boot to mc#:/BOOT/BOOT.ELF Thanks for the reply.

[@kanaymaster]

Hello, I have two problems: OPL won't launch without USB (after copying everything onto memory card) and the worse problem: I always get the message "LOGON failed". What could be the problem? Thanks in advance!

[@ProjectPhoenixMedia]

This is a long shot, if windows and network settings are correct, see if smb v1 is also enabled on windows.

[@kanaymaster]

@@ProjectPhoenixMedia Nevermind, I used gateway as router instead of PC. Now it works. But thanks!

[@ng990]

Love the game in the thumbnail, I used to play with friends so much fun!!!

[@543superbros3]

Im having an issue where is says logon failed. my ps2 games run fine but cant the the ps1 games to run ive double checked the dat folders to make sure the ips lined up with the ones set in opl and still havent got it to work

[@ProjectPhoenixMedia]

Got all files in right locations? Networking can be a big hassle sometimes. See this link for ideas: bitbucket.org/ShaolinAssassin/popstarter-documentation-stuff/wiki/quickstart-smb

[@FunkyDopeBrother]

I did everything in the tutorial, the games show up in OPL under PS1 games but when running it shows a black screen and then it goes back to the browser and just shows memory cards

[@FunkyDopeBrother]

I got it to work. I updated the launchELF I don't know if that was the problem but it worked after that.

[@solidice5660]

Ok I had this working once before but now it won't. I can share, no problem, a folder on my desktop. However, I have so much data that I moved it all to a folder on my external usb Hard drive. Now for some reason I can't share to guest. I select specific network share and type guest, read/write, click share. IT SAYS that is is now sharing but I cannot access it. I go back into the share thing and the guest I told it to share to is missing (like it didn't save it). Again it all works fine on a folder on my desktop. I just can't Share the folder on the usb hard drive anymore. Any help would be very much appreciated.

[@solidice5660]

@@ProjectPhoenixMedia I tried using a different username and nothing changed. It wont let me share folders or the USB Drive at all.

[@uksampson]

I’m confused about what mode to choose for the VCD files. If playing over a network share from a USB drive, which do you choose: network or USB? What format would I choose if I wanted to then move files to a micro SD card on a raspberry pi for SMB access?

[@ProjectPhoenixMedia]

Network. If you are doing raspberry pi, then its still network.

[@knightbewion]

For me I'm trying to get Resident Evil 1 running, which is two discs. When I drag the .cue file to cue2pops, it tells me that it does not support multi-track discs. Should I use CDmage of PSXVCD? Tried CDmage, it didn't give me an option to save anything when following this guide ( www.ps2-home.com/forum/viewtopic.php?t=41 ). Currently trying PSXVCD and will report with results, but I figured I should ask.

[@knightbewion]

@@ProjectPhoenixMedia PSXVCD worked, cue2pops didn't.

[@Chooooseeeenone]

So I can’t get opl manager to pull up my ps1 games, I’ve followed the tutorial from beginning to end multiple times but nothing makes my opl manager pop up the games any tips?

[@ProjectPhoenixMedia]

Latest opl manager cannot detect your list of ps1 vcds? Otherwise, most important is let's get the games to work first: bitbucket.org/ShaolinAssassin/popstarter-documentation-stuff/wiki/Home

[@Chooooseeeenone]

@@ProjectPhoenixMedia yeah my opl manager is ful of my ps2 games but it does not recognize the ps1 game that I have in the pops folder. my folder setup is ps2smb

[@terogamer345]

Is Popstarter just an emulator right its not running native as a PS2 would a PS1 game? So in that sense is it better than running an emulator say on PC or raspberry pi?

[@ProjectPhoenixMedia]

It's an emulator from what I researched. Is it better than PC or raspberry pi? Not sure, but I think PC and raspberry pi can do way more cooler stuff with filters and plugins that you can't do on ps2.

[@allanmacatangga1582]

nomemory card detected playing ps1, how could I put vmc on pops? im using smb method

[@ProjectPhoenixMedia]

Check out the bitbucket website for help, I would have thought it would have created the vmc on smb so no real memory card required either: bitbucket.org/ShaolinAssassin/popstarter-documentation-stuff/wiki/smb-mode

[@b0s0n_h1ggs]

How do you get this dark theme in a wlaunch? Do you using custom skin or custom color scheme? Can you please tell me color pallet in rgb digit?

[@ProjectPhoenixMedia]

It comes with that specific version of wlaunch I think?

[@lprus2893]

Guys, can you tell me why when you start the game it gives out Connecting there and then LOGON has failed

[@ProjectPhoenixMedia]

Try a different game to make sure it is working, or maybe you have a incompatible game

[@joonboi84]

So, I got up to the actual LAUNCHING of PS1 Games. My IPCONFIG and SMBCONFIG match my settings used for OPL PS2 games (which work perfectly) but I ALWAYS get SMB LOGON Failure on PS1 games...

[@ProjectPhoenixMedia]

Some tips here just in case:bitbucket.org/ShaolinAssassin/popstarter-documentation-stuff/wiki/smb-mode

[@johnmcd2076]

@@ProjectPhoenixMedia having a issue also but i am running server 2016 have my user name as servername/guest and the account is enabled and is working for ps2 games

[@kst68410]

How come I get a black screen with information instead of the PlayStation one game loading from PS toSMB

[@kst68410]

AarvikSingh I believe it is the latest build I downloaded it in the last week of June

[@GT0NY]

During loading SMB PS1 games you see the boot information. It says the troubles or success. Does it load the game anyway?

[@max210379]

Dear PPM, first i want to say is thank you very much for this video and i've done exactly the same, because i wanted to play the castlevania ps1 games on my usb stick on OPL. But when i open it on OPL, i get a dark screen. I only hear sound that's it. I have to say that i have a pal system and the roms are mostly ntsc. But i have a 4k panasonic led tv. and i use component cables. Can you perhaps tell me what could cause this problem ? Thanks in advance.

[@max210379]

@@ProjectPhoenixMedia i really thought that it wasn't region restricted when putting games on a usb stick to run with FMB. But it is then ? And what if you use a HDD. Is that Regioncode restricted ?

[@pepe_salot]

Thank you for all your help! An updated version of this same tutorial for OPL with OpenTuna on PS2 Slims would be great!

[@ProjectPhoenixMedia]

For now as long you know how to use OpenTuna to load OPL, rest is same process.

[@GB.Gaming]

I'm so confused. Where did that POPSTARTER folder come from, with all the .irx files in it and IPCONFIG.DAT, etc.?

[@ProjectPhoenixMedia]

It makes it itself.

[@bitessun]

​@@ProjectPhoenixMedia I'm also confused by this, it can't just make itself, was causes it to occur? Edit: Click on the 'Forum text tutorial' link and scroll down a bit

[@CrisisXD9]

Many thanks for the help you do all this time man

[@fawkesnake]

Awesome video dude.

[@RejectedManiac]

Having an issue with OPL. It seems this new OPL doesn't accept the old ps2 configs or saves. I can't seem to figure out what the issue is. All of my PS2 games boot to a black screen. I updated OPL from 0.9.3 stable to the daily build you mentioned. Also I noticed the tool Cue2Pops doesn't seem to convert any of the games that I've found that look like this: Game(Title1).bin Game(Title2).bin Game.cue Help would be much appreciated.

[@benbou]

You can try to convert you multi bin files game to a single bin file. Check this video for instructions: kzbin.info/www/bejne/g5TVf4SGmJVqiK8

[@onatw]

All respect to you man, thanks for this tutorial. Can you answer this maybe? Do I have to copy the popstarter folder to the mc? or can I let it stay on usb if I keep the usb plugged in when i boot opl? Hope you get what I meen.

[@christopherbennett4729]

WE DID THAT!! IT WORKED!!

[@andrewdupuis1151]

How do i add games have more then one cd games like The Legend of Dragoon

[@TheOriginalVersatile]

Andrew Dupuis bitbucket.org/ShaolinAssassin/popstarter-documentation-stuff/wiki/multi-disc

[@andrewdupuis1151]

@@TheOriginalVersatile Thanks

[@patrickyeary]

Can you set popstarter to use DHCP ps2 IP settings?

[@ProjectPhoenixMedia]

I haven't personally tried it, so not sure off hand. I suggest you check out the bitbucket for more info and may need more experimentation: bitbucket.org/ShaolinAssassin/popstarter-documentation-stuff/wiki/smb-mode

[@patrickyeary]

@@ProjectPhoenixMedia thank you for responding. I know this is an older video but your videos have helped me tremendously!

[@cloudsmiles1]

Is it possible to play both PS1 and PS2 games with this method? Basically can I switch between a PS1 game and a PS2 game? Do you create one separate folder for PS1 and one for PS2?

[@ProjectPhoenixMedia]

You can have one network share that has both PS1 and PS2 games yes, but you will need to restart the ps2 and then select your game in question.

[@cloudsmiles1]

@@ProjectPhoenixMedia Thank you for your answer :)

[@dodyrolandosaputra832]

How if its from iphone?

[@darksoulzfreak]

I set up PS2SMB two days ago for PS2 games, and it works fine. I followed all the instructions in this video, but I have no "PS1 Games display mode" option and PS1 games don't show up.

[@darksoulzfreak]

I tried changing the Gateway in IPCONFIG.DAT from my PC's IP Address to the Default Gateway, but that didn't fix anything.

[@TheMISTIK2000]

@@ProjectPhoenixMedia This just saids a completly different tutorial from what you said in your video. Now we need a different ELF file per game ? Why you didn't do that ? Why it works then ?

[@pol.kraine7890]

I believe you need the SLUS#'s then title of game. Try renaming the vcd file either pc or ulaunch.elf. also if opl doesn't show the ps1 option check your settings and enable it to auto or manual

[@MartillodeMiller]

Nice video man!! it helped me a lot, but is there a way to play PS1 games having the console conected through component cable? when i launch a game the PS logo shows but then is just a black screen and if i put the AV cable then the game comes on screen, i guess that is something related to maximum resolutions that the PS1 supported and the minimal supported by the component cable.

[@BennyBsolo]

Not all CRT televisions support a 240p component connection.

[@datravman]

Why is your gateway and pc address the same?

[@ProjectPhoenixMedia]

I forced it the same but if you want to change the gateway to your router for example, that is ok

[@mohamedasim776]

Great tutorial my friend, however I tried this method as well as the usb method to play spiderman 2 enter electro but it is very glitching in graphics while gameplay so any help from you would be much appreciated

[@ProjectPhoenixMedia]

Try SMB, but if that doesn't work, maybe look into mechpawn and play a cd-r burnt disc...or go old school and get real ps1 with tonyhax and no concerns there.

[@haralamc]

I get cue sheet is invalid every bin or cue file that i drag and drop into cue2pops??

[@haralamc]

@@ProjectPhoenixMedia that's working to convert them thanks

[@SnackCannon]

Got everything working using your flash drive tutorial, then I converted to running through SMB and I love it. Thank you. But do you know anything about changing the popsloader version? I was trying to play Soul Blade and it was glitching super bad, so I'm assuming it's the version of pops I'm using.

[@ProjectPhoenixMedia]

Popstarter is just a few key files. If there was a newer version of those files, replace them and see what happens.

[@黄宝峰-p3w]

Excuse me, would you please tell me if there are multiple of which CD1 CD2 CD3 CD4 CD game, but how to change 你好，请问如果有CD1 CD2 CD3 CD4 的多个光盘游戏，如何却换

[@jack151727]

it will not let me play digimon world 3 help please

[@PeterEdselBLee]

How about multiple cd like final fantasy 7or 8 or9?

[@ProjectPhoenixMedia]

Finished the tutorial last night, enjoy.

[@GT0NY]

Update: :))) SOLVED!!! :( Every thing is gotta be ok, but SMB for PS1 games don't work for me. I can play PS2 games with SMB and i can see PS1 games in the OPL list, but when i launch it, it loading then say connected! Then goes strait to the ps main menu (with a memory card). I can play PS1 games through a USB though. Does anybody solved the issue? Would be happy to use SMB. I use (Modbo4.0 9000)PS2- router- PC connect.

[@GT0NY]

Yey!!! Finally i got this work! But before i describe what i've changed i should clarify what was the trouble. I am using Modbo 4 PS2 (9000), connected it that way (PS2> Router> PC) Already settled SMB for PS2 games but couldn't play SMB PS1. It was USB PS1 = OK USB PS2 = OK SMB PS1 = NOT WORKED SMB PS2 =OK It booted till words connected but POPStarter shows no error and kicks out to the OSD menu after opening the POPS folder. I changed a lot of steps at the same time to get this work. Perhaps the main trouble was POPS incompatibility with OPL's (conf_elm.cfg) file. 1)I deleted all the (conf_elm.cfg) files. Before the trouble solved i used OPL_971 that needed this file to see games. 2)(Step to play through an OPL) I installed a second OPL_1875 on Usb(IT's big). Then i did the steps what this video guy did 7.24 with the "OPl Manager" to change game name to add SONY ID OPL to could see our POPS games. 2.5) Not sure if this step was needed but anyway. I changed all the VCD file names on PC to be without spaces and only capital letters as like SLUS_006.43.ROGUETRIP.VCD and short enough to be less than 32 symbols. 3) Not necessary step but makes it easier to check the result and exclude OPL influence. I created an SB.SLUS_006.43.ROGUETRIP.ELF file on my USB Flash drive for PS2. This step becomes essential if you are not going to use an OPL and wanna launch it with a uLaunchELF. 4)Not sure if it makes difference but i did this step as well. In the SMBCONFIG.DAT i typed login and password i use in my PC. 5) And this step i believe is important. PC ip in DAT files. You to understand my: Router IP = 192.168.2.1 PC IP = 192.168.2.10 PS2 IP = 192.168.2.11 And settled SMBCONFIG.DAT as: 192.168.2.10 PS 2 GTONY Password And IPCONFIG.DAT 192.168.2.11 255.255.255.0 192.168.2.10 After these steps your SMB PS1 games should start work. And some afterwords. Couple things that thought was the cause of problems but they were not. I thought i need another POPSTARTER.ELF but not, there is two revisions i found on a web: older one is modified 20.10.2017, and newer one is 05.06.2019 but they both work well with SMB. And second thought was network_modules but they are all the same.

[@yumsandw1ch]

Where that boot.elr file even come from bro???

[@yumsandw1ch]

Elf

[@McJhonns]

Excellent video as always, anyway.. there´s more newer releases than the one you downloaded, why u used that version?

[@McJhonns]

@@ProjectPhoenixMedia totally agree, but regarding there always be newer versions this is not the case sadly because popstarter dev is abandoned :(

[@kaiten973fr3]

I tested different versions, Only OPL Anniversary Edition work with this method, it's more easy

[@erpegowiec]

what if my ps1 game does not have a .cue file

[@GT0NY]

UltraISO > Tools > Convert

[@theycallmeJacko]

Finally! This is perfect! Thank you. But it's still running the games with some lag. I used to run them from an USB but some people say that playing games from USB makes them run kind of slow, and since most of them said that this was the best method I tried it to see if there's any difference but it runs then practically the same for me, lagging quite a bit on cutscenes and such. Andy idea what can I do? Apart from that, excellent tutorial thank you very much.

[@ProjectPhoenixMedia]

Not sure I would think SMB is the best so to say it lags is surprising. Maybe its a compatibility thing.

[@theycallmeJacko]

@@ProjectPhoenixMedia Actually my PS2 games do run better, the problem is with my PSX games, they are the only ones that seem to have lag, specially in cutscenes but the gameplay too. I have an SCPH-9001 and I've read in forums that it should work ok on most cases. Also the games I have are all compatible because I looked at the PS2-HOME chart where all the compatible PSX gamed are for PS2. So I don't really know what is it. It's not like it's unplayable but it's kind of annoying since I know it should run just fine.

[@BeemerDream]

Great tutorial as always. I´ve tried this on my BC PS3 , but it just goes back to homescreen. Is it possible on the BC PS3? Everything else works on OPL with SMB except HDD. ;-)

[@12345done6]

It says logon failed what does that mean?

[@ProjectPhoenixMedia]

Check your network/password settings in OPL

[@12345done6]

@@ProjectPhoenixMedia it worked thank you

[@bombabombom3603]

@@ProjectPhoenixMedia I did the EXACT same thing as you, the literal EXACT same thing you have presented to us in this video, and I cannot get it to work for me whatsoever. I keep getting the "log on failed (0)" error message and kicked out to the uLauncher menu. I made triple sure to set up my information, location, the DAT file edits and the SMB files are in the right place, and I CANNOT get it to work. What in the hell am I doing that's wrong? I'm using the exact same version of the OPL you are and I can't get the god damn thing to work for me at ALL. Please help.

[@junmendero5396]

@@bombabombom3603 I've been having the exact same issue. PS2 games work great, but occasionally ps1 games will just refuse to log on and I can't play. Annoying!

[@blitz9312]

Is it possible to use a internet browser on ps2

[@blitz9312]

@@ProjectPhoenixMedia yeah to possible for download games straight away

[@iangabrielalcantara7756]

@@blitz9312 I think there is tons of videos in the internet that answers your question bro. I saw one one just earlier in my recommended vids

[@alienrefugee51]

If you're using the SMB method, it would be easier and faster to use your PC because your shared HDD with games is going to be connected to your PC, not the PS2. And the PS2 has a USB 1.1 connection which will be slower.@@blitz9312

[@blitz9312]

@@alienrefugee51 good point i have a fat ps2 so was thinking of my hdd

[@SmallEngineNut]

nope. Not even worth it. It would be so outdated it wouldn't be usable. That's why we have computers.

[@andrewdupuis1151]

thanks I finely got it working on my PlayStation slim my cdrom is failing

[@wanderingsoul621]

Andrew Dupuis so this works on ps2 slim as well? I mean playing ps1 games using smbshare right?

[@hassanshamsedin7335]

@@wanderingsoul621 Yep, it does! It's so nice how SMB can run everything haha.

[@natalya_volochay]

their website doesnt allow me to enter, they think im an spambot or something

[@ProjectPhoenixMedia]

Psx-scene forum should have info

[@ModnRepair]

Is there another place to get cue2pops v2.3?

[@ModnRepair]

Assembler Games....I see the other one in zippyshare now but how do you use zippyshare?

[@benbou]

You can also find it on the "POPStarter Documentation & Stuff" bitbucket download page. bitbucket.org/ShaolinAssassin/popstarter-documentation-stuff/downloads/ Direct download link: bitbucket.org/ShaolinAssassin/popstarter-documentation-stuff/downloads/CUE2POPS_2.3.7z

[@LmaoXBest75]

Windows XP tutorial SMB?

[@ProjectPhoenixMedia]

I made one a long long time ago I do believe. Really, people shouldn't use windows xp, its a massive security issue in 2020.

[@LmaoXBest75]

@@ProjectPhoenixMedia could you atleast add a file share tutorial for Windows XP please I’ve been trying to figure it out

[@ProjectPhoenixMedia]

You should see my blog tutorial for ps2 smb windows xp: versatile1.wordpress.com/2010/03/15/how-to-boot-games-off-network-smb-with-playstation-2-ps2-using-openps2loader-a-novice-guide/

[@MarwanTabchy]

Your tutorial for Playing PS2 games from SMB worked perfectly, but i'm having troubles with this one as no PS1 games are showing in OPL.

[@RhystleMania]

I'm having the same issue, followed every step for PS1 and cannot get the games to show up. The PS2 games still show up fine though.

[@ProjectPhoenixMedia]

Check this out in meantime guys, not sure why SMB is a difficult topic but sometimes it is for users: bitbucket.org/ShaolinAssassin/popstarter-documentation-stuff/wiki/smb-mode

[@MarwanTabchy]

@@ProjectPhoenixMedia it's not a difficult topic.it worked flawlessly for ps2 games without any problems. However it didn't work for ps1 games. (PS1 games worked using USB method though)

[@MarwanTabchy]

@@ProjectPhoenixMedia Thanks for the Link it was helpful. it's working now

[@learnstocode.zenx.2501]

Are you feel yourself nostalgic? Make more please.😎

[@denis-florian_0.57]

The games work but all are BLACK AND WHITE. Please help!

[@denis-florian_0.57]

@@ProjectPhoenixMedia I fixed it, the problem was I have a PAL PS2 and the games were NTSC-U but I used a converter that turn all my NTSC games into PAL and now the games are color.

[@ampecsu]

Make sure your memory card has enough room!...tI will let you thru the motions but will never tell you that the files did not actually copy correctly.

[@kubavitalos7742]

ampecsu How much is needed?

[@skatcat743]

CUE2POPS link dead

[@ProjectPhoenixMedia]

Get latest from ps2-home.com

[@turrinha9]

for me this games ps1 not apper :(

[@ProjectPhoenixMedia]

See tutorial:bitbucket.org/ShaolinAssassin/popstarter-documentation-stuff/wiki/smb-mode

[@codename230]

Games accessible in OPL, load game, freezes at SMB Loading Mode. I'm pretty sure I am missing something.

[@codename230]

I got it all worked out eventually, finding that I messed up those ipconfig.dat & smbconfig.dat files. Thanks in advance.

[@NoobGamer-vv3ts]

thank you so much

[@mklp-g4u]

انا من العراق احبك كثيرا استمر في المحتوى انتة حقأ مبدع