PLC E-Learning - Session 3 Introduction to PLC Trainer & PLC Software

PLC E-Learning - Session 3 Introduction to PLC Trainer & PLC Software
✅ Use the coupon code🔥KZbin 🔥to get 20% discount on the course Delta Automation PLC, HMI, AC and Servo Drives available at codeandcompile.com/course/del...
For daily/weekly updates follow us:
📸 Instagram: / codencompile
👩‍💻 Online School: www.codeandcompile.com
📑 Wiki: wiki.codeandcompile.com
🌍 LinkedIn: / code-and-compile
Cheers,
Rajvir Singh

[@vaibhavmishra267]

GRT work sir !!! Although i have done 6 weeks training course on plc's & scada but your videos made my concepts more clear....thanks

[@thegeterrdone]

Thank you for your feedback :=)

[@mattbenson2497]

Awesome thanks for taking the time to post such useful videos!

[@anchanibabu]

I was in search like this video .Many thanks for this effort.

[@slimanemohammed1348]

Hello! thanks for your lesson, I have quetion sir if you can help how do you create a DVP 14 SS Trainer in Automation studio. Thanks again.

[@srivatsaa.r.9936]

sir yr video on PLC E_LEARNING__SESSION 3.. I watched the video and i LIKED it. u explained WELL. S.VATSA

[@ndalozie9344]

this very good and simple ,I have done it passed but need more industrial experience.

[@habibali2925]

Hi... many thanks to you, really it is so useful and helpful video 😊 I appreciate your efforts and your time .. I looking forward to the next video 😀 have a nice weekend

[@thegeterrdone]

Habib Ali your welcome ;) hope you learnt !

[@jobishkumar]

Sir you're great very useful classes thanks

[@priyam1776]

Thanks sir.. it is useful.. Now i had started my automation DCS course before 8 days..can you provide more useful videos about the DCS

[@engineermujeeb890]

Sir appreciate your work and kind sir i have question why we give 24v to S/S

[@JameelKaleri]

sir very usefull all of ur video tutorials i like so much ...

[@thegeterrdone]

Thank you!

[@JameelKaleri]

sir upload lift operation process complete video... with project,,

[@thegeterrdone]

Thank you for your appreciation! Get free/paid courses on Automation at www.nfiautomation.org

[@amardevsingh5726]

Good. I understand very carefully. Thanks

[@Challaish]

Very Clear and helpful

[@pradipsonune142]

Hello sir I have a plc for DOL starter control so what kind of ratings plc we buy?

[@something_of_a_dreamer]

great work its very helpful thank you

[@thegeterrdone]

Thank you for your appreciation! Get free/paid courses on Automation at www.nfiautomation.org

[@allhoursmaintenance3022]

Great stuff, I am a member of NFI already, do you have any training for robotic control, ex. fanuc robots, thanks, Justin

[@thegeterrdone]

Thank you! Unfortunately not, ourt next course is on Siemens HMI!

[@perfectstudy7448]

Sir jo plc ke bare me aap bta rhe hai pc pe o kis software se bta rhe hai

[@ramraut64]

Thank you very much.

[@janathmahesh137]

thank you sir.. really helpfull...

[@santhulokesh7710]

Excellent your explanation

[@jordanmo4325]

Thank you for all these helpful videos, I keep getting flow deviation error on my rate reading screen with showing all rates zeros, can you help here plz

[@thegeterrdone]

Kindly check the manual of the sensor ! Generally all the sensors had manuals with troubleshooting techniques to the possible errors

[@Haidier83]

Nice tutorial, i'm watching since the session 1, so I tried to create my own simulation with graphic, is that possible?? lets say i want to create the complete wiring and plc with simulation for just an open and close (up & down) a garage door.

[@thegeterrdone]

Yes it is possible with SCADA software :)

[@ibrahimyazeed4317]

please where do i get the plc card that u are using. i only have 2 plc card in the JIC standard (thus the input and output cards) thanks

[@yashwanthmonu438]

I would like to thank for your content it helped me a lot and I would appreciate if you make a video on interfacing a schnieder plc to a Altivar28 drive.

[@thegeterrdone]

Thank you for feedback. Sorry unfortunately we do not have Schneider PLC in our lab

[@thegeterrdone]

Thank you for the feedback, but we do not above mentioned hardware module to make the video

[@factvivid5172]

Be frank sir, After watching your video first thing in my mind come is that "Where is Subscription button" because I don't want to miss your next video, Thank you for all this.:)

[@jijojoseph3858]

Thank you. Really helpful

[@thegeterrdone]

You are welcome!

[@kunalyadav-qh7lu]

sir first of all thank you very much for this effort. sir, i want to know the series of your lectures so we can go forward step by step.

[@thegeterrdone]

Dear Kunal, the series of lecture comes in the paid course - Learn 5 PLC's in a Day. get more information here: nfiautomation.org/courses/learn-plc/

[@SourabhSplash]

Sir, can I connect any PLC with this software. Will it work with every PLC?

[@localnews2302]

Thank a lots sir very very useful you explain very well

[@thegeterrdone]

+Electronic Repair thank you ;)

[@ertarunmewada7510]

this so very useful and help to understand PLC thanks for upload video i want to ask one question for analog input and output same process is aply

[@thegeterrdone]

What is your question, sorry i could not understand!

[@Mk-mi8zo]

Good video and good instructions the way you explain it's simple and easy,thx sir wish you post more video on allen bradley.

[@thegeterrdone]

Thank you for your feedback. Perhaps no ideas on Allen Bradley videos but IoT. Subscribe for more upcoming videos :)

[@Mk-mi8zo]

@@thegeterrdone in north America we use mostly 98% allen bradley for industrial plc and for instrumentation we use mostly Siemens.

[@ChirAgPandya11093]

sir im having dvp14ss2 and serial cable rs232 with db9 port at pc side. but my device manager isn't showing any connectivity between plc and pc hence im not able to establish communication ..please help

[@thegeterrdone]

Kindly share some screenshot to our email ID- [e-mail]

[@vetrukayidham704]

can i try the same with fatek plc

[@mattyhi446]

where can i find this plc trainer?

[@johnduran6989]

thank you

[@rintorapheal2002]

hi Sir, i would like to know how could we create the dvp 14 ss trainer in automation studios in @0:26 ? i found problem while using wpl soft my coil is not turn on unless in force it on while stimulate. please figure it out sir. regards.

[@thegeterrdone]

Please send details at [e-mail]

[@hamidfaizi875]

Sir, Thank you for explanation, do you have an specific course for Siemens PLC Training Step 7 ?

[@thegeterrdone]

Hamid Faizi yes we have specific course on Siemens. S7-1200 with KTP 400 HMI. You can find more details in our website at www.nfiautomation.org

[@sallycombrink4228]

Why dont you try our GSM Commander. You can view all the options: www.gsmcommander.com

[@savitapadarya6744]

awesome sir. thank you

[@thegeterrdone]

Thank you for your appreciation! Get free/paid courses on Automation at www.nfiautomation.org

[@compressorman43]

thank you graeat. job

[@masudur53920]

Thanks sir

[@kennedykemboi3772]

good work

[@msdas1245]

Thanks Rajiv sir.. I have studied electronics and communication but now i am working as a instrumentation engineer in a power plant. Here we have DCS system but everything is installed so i can't do more with this. Since i am very much instrested in knowing this things i request you to please give some idea about DCS as well. Also give me idea how can i get a platform where i can work able to work in this platforms.

[@thegeterrdone]

Dear Madhu Das, we don't have enough resources to make DCS tutorials, but in future we would surely update something related to DCS as well!. Thanks for feedback

[@zihadbm]

pls share the web site to download AUTOMATION STUDIO free ver.!!!

[@manishtri01]

waiting for your next video.!

[@thegeterrdone]

You can access all the course videos in our paid course available at www.nfiautomation.org

[@AsifShaikh-zd3kf]

If I connect 24v to s/s then what will be output whether it is pnp(sourcing)

[@AsifShaikh-zd3kf]

When we should connect 0v and 24v to s/s

[@AsifShaikh-zd3kf]

Plz rply sir asap

[@pagscarl6668]

very nice video, i have also delta plc DVP 32ES, i uplod the program inside, and i already clear the program, my problem is i can't download the program i create, just the same what u did, i compile no error in program, when i downlod the say "this model does not support this function" but my plc setting is correct, ES model thanks for feedback

[@thegeterrdone]

Sorry for delay in response, if you still finding this error, kindly contact me at [e-mail]

[@naveediqbal4691]

Sir seriously you are an amazing person and a great explainer thank you very much for all these efforts..Great Job

[@manishtri01]

i need one complete programe using all commands. with explain

[@thegeterrdone]

You need to join the paid course in that case. It cost only 2940 INR for lifetime access to 200 lectures.

[@pijushkumardas6303]

Is this software is free for all???

[@abdulsamathu2756]

please explain detail about SUBROUTINE...

[@thegeterrdone]

Detail explanation is in the course - nfiautomation.org/courses/learn-plc/

[@AdityaSharma-lb1gm]

sir app jo software use kerrahe hai uski download link batadijiye

[@thegeterrdone]

It's given in our website www.nfiautomation.org - Support!

[@abdulh4830]

thank youit is agood

[@thegeterrdone]

Thank you :=)

[@vinaykumar-lo5sg]

sir ... have uploded AB slc 500 plc videos.

[@arununhale214]

how can I get the entire plc sessions altogether for free in your voice?

[@LearnPLCinHindi]

Sorry it's not for free but at this link: nfiautomation.org/courses/learn-plc-in-a-day/

[@pradeepr760]

Sir make toyopuc plc program I r circuit explanation pls

[@AsifIqbal-sj1ct]

Assalam o alikum sir... First of all thanks for your time and tutorials.. Your way of explaining things is just awesome .i have a question in PLC E-Learning - Session 3 Introduction to PLC Trainer & PLC Software .You used WPL-soft... will this software work with every plc or just with the DVP 14 SS ? Means if i learn to make ladder on this software ,will i be able to upload it to siemens,omron ,delta ,Fatek etc plc practically?

[@thegeterrdone]

Thank you for your feedback. Well this software works with only Delta PLC. We have already uploaded demo videos for Omron, Siemens, Delta, AB and Schneider. Please explore our channel to view other videos.

[@AsifIqbal-sj1ct]

thanks sir.

[@thegeterrdone]

Thank you for your feedback. Yes, we are using WPL Soft, this software works for only Delta PLC. For every other PLC we have different software. Siemens - TIA, Omron - CxOne etc.

[@thegeterrdone]

May be this course would be more informative for you: nfiautomation.org/courses/learn-plc/

[@sameermonna6998]

hi can you provide few on field commissioning and erection videos

[@localexpo2374]

sir pls upload full season video.

[@LearnPLCinHindi]

Full length all videos are in this course: nfiautomation.org/courses/learn-plc-in-a-day/

[@tariq5mahmood634]

Sir I want learn siemen logo 230 RCL

[@thegeterrdone]

Great .. go for it :)

[@kavij9904]

Website..given for software is not clear

[@jameskearney4100]

Good but manual is better.

[@htc2hd]

dude seriously, when in input side you connected zero to one end of a switch and 24 volt to the other end and you turn the switch on you will create a perfect short circuit. It is like touching minus to plus of a 24v battery ???!!!!! (you have no consumer in the circuit). What the heck are you teaching here ?? Also when you have plus to one end of a motor and nothing on the other end you just created a one phase situation, you can damage the motor coil. you can not interrupt neutral or zero and have plus on; it works the other way interrupt plus and have zero on !!!!

[@Tom_Sawyer385]

htc2hd There is always a civilized way to say things. I can smell that you are just started learning the PLC and you trying to show that you know little bit .play the video slowly I think it’s little faster for you and watch and learn before you open your big mouth.

[@thegeterrdone]

+htc2hd Can you tell me the correct way of Plc wiring then ? 😅 - also tell me your Skype ! We can discuss

[@Tom_Sawyer385]

Rajvir Singh I have a question and a proposal for you? Do you have a e mail address I can email you?

[@prashantmanshrestha]

How did you create the DVP14SS PLC trainer diagram in automation studio ?

[@rameshaatla7072]

give the answers

[@janathmahesh137]

thank you sir.. really helpfull...