Рет қаралды 10,082
You will learn how to define the kinetics of a reaction and simulate the plug flow reactor in HYSYS. Also, you will see how Adjust function will help you to find reactor volume to achieve a particular reaction conversion. In the end, you will learn how to analyze the concentration profiles inside the reactor with respect to reactor length.
To compare these results with the DWSIM simulation, please consult the following video. The link is here: • Plug Flow Reactor Simu...
📢 If you find my content helpful, please don't forget to subscribe to my channel bit.ly/3b6wuV9 🔔.
Link to download DWSIM software: dwsim.inforsid...
• Extractive Distillatio...
If you want ❤️ to learn Aspen HYSYS from very basic, then check the following links:
Tutorial # 1
Getting started with Aspen HYSYS
• Getting started with A...
Tutorial # 2
Bubble point, Dew point and Phase diagram calculations
• Bubble Point, Dew Poin...
Tutorial # 3
Flash calculations in HYSYS
• Flash Calculations in ...
Tutorial # 4
Sensible and latent heat and generation of saturated steam table in Aspen HYSYS
• Sensible and latent he...
Tutorial # 5
Centrifugal pump sizing and selection in six easy steps
• Centrifugal pump sizin...
Tutorial # 6
Pump power and efficiency calculations in HYSYS
• Pump power and efficie...
Tutorial # 7
Pump performance curves generation and rating in HYSYS
• Pump performance curve...
Tutorial # 8
Simulation of Compressor and Turbine in Aspen HYSYS
• Simulation of Compress...
Tutorial # 9
Compressor Surge Analysis in Aspen HYSYS
• Compressor Surge Analy...
Tutorial # 10
Pipe Sizing, Pressure Drop Calculation, Use of Adjust Function in HYSYS
• Pipe Sizing, Pressure ...
Tutorial # 11
How to use case study tool and generate vapor pressure curve for Propane in HYSYS.
• How to use case study ...
Tutorial # 12
Crude oil three-phase separation | Decanter simulation in HYSYS
• Crude oil three phase ...
#PlugFlowReactor #AspenHYSYS #ConcentrationProfiles