Plug N Play Monitor Upgrade - Arcade1up MK30 Midway & Joust Legacy

Link to the eBay listing for the monitor used in this video: www.ebay.com/i...
Link for the 4 channel CCFL Inverter Board: a.co/d/aUz1zEw
#retrogaming #mortalkombat #arcade1up

[@BillsRetroGamingShow]

You sir, are a wizard! Thanks for doing the research and putting your time and $$ into figuring out one that works (and works well). Great job!!

[@DanMacTwentyOne]

Hey, me again - finally got around to doing the replacement today and it looks phenomenal. 100x better than the stock panel. The monitor only cost me £25. Thanks SO much for taking the time and spending the money in doing this research. It's really appreciated. You're a true knight of the realm.

[@19kfox]

🦊👊🏼

[@DanMacTwentyOne]

Just picked up the E1715S for £25 GBP! Unbelievable deal. Thankyou for the guide. WIll be doing the upgrade soon.

[@gregorytheambassador]

Thank you for this video. I got the exact monitor and just completed the replacement. Easy peezy. I greatly appreciate you making this video sir. I now feel like my cabinet is complete.

[@DG-ti4qc]

As of 1/6/24 still works! Just replaced the POS that came with Joust with this monitor and now it looks great!! Thanks Fox!

[@19kfox]

🦊👊🏼

[@tommy516]

This is outrageous; ARcade1up needs to get it together, the cabinets last year were perfect!

[@castleranch738]

This solution has put the Centipede back on the ‘must buy’ list for me. Thanks!!! Frustrated that Arcade1up is making us have to do this but I’d rather have some solutions than none.

[@stuntz0rZ]

Just purchased that monitor & inverter board. will build the cab soon. Thanks again for help identifying my issue with brand new T2 with no working light gun. Arcade1up sent a a new control deck. (guess they don't stock the usb board itself) the ebay seller promptly refunded the cost which came to $69 with shipping. Surprises me how many of these things slip past Acade1up's quality control before they ship them out.

[@JP-rk8ok]

Did this today and it worked perfectly - thanks for the video and the suggestion on the replacement monitor!

[@toddwarsing5929]

I just completed the swap. It looks sooo much better!! Thank you !! Seriously people it’s a big improvement. The way it should’ve come stock. Shame on arcade 1up for that half ass screen.

[@dragnhatchz]

This is EXACTLY what I was looking for! Thank you, sir 🙌🏼

[@DeadlyMcMayhem]

Thanks Fox. Just installed it per your instructions and it works like a charm and looks fantastic! I hadn’t seen it with the stock monitor because after hearing about the issues I didn’t want to even risk putting the cabinet together with the stock. I do have the Centipede Legacy with the stock monitor and I can live with it on that since I already put it together and it’s all vintage games anyway so crappy screen is almost period accurate. So thanks again. Very happy with my cabinet now.

[@GamersReckoning]

Just did this and luckily found a e1715s for 30 plus shipping on Mercari! Just on all my cabs I just started puting the two side bezel screws in that way I can get to the monitor without laying these things down or whatnot. Thanks for the excellent walkthrough! :)

[@jfacura]

A really big thank bro!! I finaly make it and it work. So better now

[@nickgerula]

Wow this is great! Thank you for showing us this. Looks pretty easy to swap out.

[@MonkeyChip]

A

[@cjcin23]

Thanks Fox! Hopefully this won’t become a regular thing when buying future cabs.

[@markchatt4197]

Thanx Fox for all your help!! I picked one up for mine since I haven’t built the cab yet 😂

[@jasonpaul2568]

Your welcome for the info you used in this video. Should Thank jeff too, who you took the info from.

[@atranfanatic]

Great work man and it looks crisp! I got the Dell 20" FP2007 monitor to eventually install on my Dell SFF PC modded custom 4 player Arcade1up Space Invaders cabinet. I can't wait to get to that project, but I do have more important life things to deal with at the moment, that I need to take care of.

[@NaderBenzid]

Great stuff will get my monitor now and do the update:)

[@CompleteGeekTV]

Nicely done. This is something I've definitely been debating doing. I still haven't put the cabinet together yet to see how much the screen bothers me but I feel confident that I will still want to swap it.

[@19kfox]

It's pretty straight forward, just pay close attention to the orientation of each connector. I took pictures of each before removing.

[@alexlarocque6255]

Good work! It's better for sure, but the Dell E1715S is still a TN panel (same type of panel as the MK30th cab). However, it is a higher quality TN panel: not as good as an IPS panel, but the colors shift is less aggressive and the colors inversion side is from the bottom instead of the right (which is better with two player at the same time).

[@alanshmahlen21]

You can def see the color inversion from the bottom-up angle in the video. If there's going to be 1 bad angle, that's the angle to be bad. Maybe top-down, if you can resign yourself to always using a stool. But with how small these are, and how 2 players need to stand apart, bad side angles is pretty much a deal breaker, and the stock 30th monitor does just that.

[@R3LAPS3productions]

I am really trying to avoid the Dell E1715S at this point because I feel like there's still better options. Even if other options aren't exactly plug & play I have no problem using the ccfl if needed. I've looked into the 1707fpt with no luck. So, now I would like to try to locate a suitable IPS panel. Would you have a recommendation for a IPS monitor as an upgrade?

[@knightranger11]

Hello ..and Great Video .. I was just wondering is it’s possible to up grade an countercade Mortal Kombat 2 player 8” screen to perhaps a 12-14” IPS screen using an oldie IBM Laptop screen as replacement ? ( and Yes ..I will have to fabricate wider Cabinet too to fit screen ) Thx

[@JeffYPbPr]

Very nice. I did the 1708fpt mod and it came out great. Had to use the ccfl converter board but it was just one extra step. Glad you found a nice drop in replacement though. Will he handy for the future cabs if they don't bring back the boe

[@trappedintimesurroundedbye5477]

arcade 1up just needs to fix this situation and start making these with the monitors from the last batch unreal

[@tjtj1566]

Picked up a Dell 1907FPT today for $5. Gonna go into a MK2

[@ThomasGrillo]

Well, there's no way around it. It's what we HAVE to do in order to get what Arcade1up SHOULD have done in the first place. It sucks that we have to spend more money on top of the over half grand we spent on these cabinets to make them right. Frankly, not that they ever will, but Arcade1up SHOULD offer those customers who request one, a BOE monitor replacement, even if it has to be sold to the customer. That's what should've been installed, as expensive as these cabinets are. I can understand a crappy TN going into a countercade, but not anything that costs more than $350. As soon as I can save up some MORE money for my black hole of a Centipede Legacy cab, I'll be ordering the Dell E1715S monitor. Thanks for sharing this.

[@C_Blurr]

Great video, concise but thorough at the same time. I personally think the $499 price point is fair for this cab, monitor issues and all. $550 all-in to correct the monitor seems reasonable to me with how good the rest of it is, it's stunning to look at and the games list/features are great. I might grab the monitor now and wait for a $399 sale 👍.

[@kullanma]

I'm in the same boat and totally agree with you. It will be a little work, but all of my cabs have been anyways. $499 isn't bad as a compromise.

[@C_Blurr]

@@kullanma absolutely, half the fun in owning these for me is tinkering, it's fun to modify them and make them "yours".

[@mwrightinsurance]

I think your math is a little off… $499+ tax = $550 Add $200 monitor + tax is $220 so you’re now at $770 or $660if you find it for $100.

[@KashDaGemini]

HOnestly I'm not sure why not in the first place but I think after seeing something like this and the time put in its safe to say give the consumer BOE and nothing short of the best! Its still a 4:3 giving the view from the nostalgic look!

[@Nox1987CEV]

Nice! I did this mod for 35 bucks with a viewsonic monitor and the extra board to power up the LED lights

[@goofyfoot390]

Thanks for doing the homework for everyone👍

[@grgmj1980]

Thanks KFox! Should we do this to our cabs you ask? We always have the choice. I personally will change mine out. Thanks again appreciate your support.

[@rstout1152]

Just installed it and it looks great !! thanks man :}

[@ribiflibi]

Question: is it less pixalated than with the original monitor? Or it only improve on the black color level ? Thanks

[@rstout1152]

@@ribiflibi i did not see any difference standing in front of it until i stepped to the side a little bit and could really notice the difference , after watching this video i looked side to side and could see washout and it was only 50 bucks on ebay for the other monitor so I said why not and I still have the original monitor for back up !

[@ezql_thechicagoretroranger]

Thank you brother ! I plan on doing now the same !

[@19kfox]

Anytime! 🦊👊🏼

[@ArynWellspring]

You are a gift to the community

[@jasonhudgins9437]

You kinda skipped the install part of the video. We didn't get to see what orientation of the LVDS goes in or the led driver board and ground screw. THX for the info.

[@decadentdave]

I just bought bought Joust and want to swap out the monitor with this one. Cheapest one I see on ebay is $69 with free shipping. But I shouldn’t have to be paying more than I already paid for the cab just to upgrade the monitor because A1up decided to cut corners and do away with the BOE monitor. Every cab I’ve bought from them has to be modded and upgraded in some way. It never ends.

[@PaulXMann]

KFox, I just did this mod on my MK30th based on your video using the exact, Dell monitor you recommended ($99 new), and it looks SOOOO much better than the stock monitor. Thank you for this! Funny thing, though... if you look carefully, this Dell monitor is made by AUO, and has the exact, same model number as the one included in MK30th! I can see the model in your video (4:27), and sure enough, these are all the same AUOs... I have no idea how they're so different than the A1U version (maybe the LED lighting instead of CCFL?), but it's night and day. The stock one is borderline unplayable!

[@19kfox]

I think the way the lcd panel is lit is the real difference. Glad it worked out for you Paul. 🦊👊🏼

[@BushyStallion]

Hello my friend, I just made a review for my MK cabs on my channel and I hope it’s ok that I posted a link to this video specifically in the description as it was the one I used to purchase and install the monitor. If you want it taken off my video then no problem. Thanks in advance.

[@19kfox]

Hey thanks for the shout out, I appreciate it. 🦊👊🏼

[@BushyStallion]

@@19kfox excellent! Thank you again for posting the monitor replacement video it’s made my 30th Anniversary cab SO much better.

[@jeffreyrodriguez9255]

Thanks 🦊 Just Scooped 1 Up on Ebay for $75 bucks and Free Shipping! YAHOO !!!!

[@timladiesman09]

Did you swap the “LED backlight from the old board and connect it to the DELL? Or just leave that off completely?

[@TheBonzomatic]

Thanks for this. It helped me a lot. There are some more steps you could have shown that I found out watching another video. I'm also not sure why you removed the card from the old case? It's not necessary to do that.

[@madastra]

That’s insane how much better that is for $50-$100

[@darthxellaa912]

Great video! Still ridiculous we have to do this to achieve a decent screen for this arcade cab.

[@keithunderwood8803]

it's a great mod but I don't really think the washouts that bad

[@gaboaaa23]

so you cant adjust the settings of the monitor afterwards? I mean contrast, picture mode ect.....?

[@OverThinkGaming]

Great job !!!! Looks nice

[@19kfox]

Thanks Jason. 🦊👊🏼

[@iMxist]

Glad you are enjoying the monitor and we appreciate your purchase if you have any other needs feel free to reach out to us :) - ReelTime

[@19kfox]

Absolutely. 🦊👊🏼

[@ConsoleKits]

🔥

[@nerdsnerdic3653]

Help! When I connected the 4 channel inverter the inverter itself overheat sparks and smoke..!! What ton do?!

[@19kfox]

Do not attempt this mod when the power cable is attached. If you’re talking about the small board inside the monitor housing that powers the backlight, you can find replacements on Amazon.

[@nerdsnerdic3653]

​​@@19kfox Thanks for fast reply I'm talking about the 4 channel ccfl inverter board!

[@nerdsnerdic3653]

It's when I connected everything together it happened the inverter itself overheat. What kind of dc adapter is required to power everything? Raspi screen etc

[@tslayer2945]

Thanks for video Fox. I would have liked to see some game play. Looked up monitor and is no longer available new for that price. Seen used for $75 grade A. Puts me on the fence now, but I did get my MK30TH for $400. So......

[@19kfox]

I'll post a Short of a gameplay comparison.

[@tslayer2945]

@@19kfox would be great. thanks!

[@Vangelismusic1]

You didn't show how you connected and what exactly is running through the monitor? what I don't understand why can't you just plug a raspberry pi to the hdmi or rgb port and you are good to go?

[@alanshmahlen21]

Would be awesome if any of the Dell 19" monitors were as easy to direct swap. The P1917S and the E196FP come to mind. Does it matter if they're TN or IPS, though? Seems most of the 19" options are IPS, whereas the E1715S is TN. Wouldn't the determinants just be aspect ratio and be LED backlit? Or would the connector on the ribbon cable change between those 2 panel types? I guess if it did that would wind up being a Geekworm situation. which while not a deal breaker, means it's no longer a plug-n-play swap.

[@TboneTenEighties]

Good job. Though it's crazy that people need to clean up A1Ups mess yet again. Smh

[@JCArt]

NICE. Just bought one and giving this a whirl for myself, ONLY thing wrong with that cab is the monitor. Let's see how it goes!

[@TheCornerCade]

Fox we need your help that listing is sold out can you find another listing please!?

[@panikk2]

in person does it seem a little dim to you? i have one that's being driven by an LVDS adapter for a raspberry pi and that one is much brighter than the one that is running off my stock MK 30th pcb. when recording it looks like yours though and does have way better viewing angles. i was just expecting it to be as bright as when i was driving it with that other board but i guess they're just going to treat it a little different.

[@Jpott69]

Thanks Fox for the video, do you think the mk3 monitor would work for this?

[@prenticemacdougall2578]

I just did this on a brand new joust before I put it together and after putting it together, I only have a white screen. Any ideas?

[@R3LAPS3productions]

Alright I'm back with an update for anyone who can give me some feedback. I was looking for a BOE monitor that I could possibly use as an upgrade. Bad news I still don't know if there BOE monitors that are possibly a match for an upgrade. I did make an attempt look for a new 1707fpt but found nothing new and I don't really like to buy used electronics so that attempt was a fail. This will be another attempt to locate a suitable upgrade, would anyone know of a IPS monitor for an upgrade?

[@damonhess8068]

Hey 19kFox, I’m pretty sure it will work from all I’ve researched…. This screen replacement will work in the Joust A1U cabinet?! Love the videos and thanks for sharing your experience! 🙌🏻

[@19kfox]

Yes it will. 🦊👊🏼

[@damonhess8068]

Thanks again! 🤙🏻

[@damonhess8068]

Fox, Finished the screen swap and oh my, what a difference!! Went ahead and added the light up coin doors and looks amazing! A1up the way it should be Thanks again!

[@stevewolgamotjr.141]

OMG what kind of voodoo is this! wow

[@chuckieshea2690]

Looks real good 19🔥🔥🔥

[@troymcdonald]

Is it me or did the bottom up start to look bad? So, if you were to put it into a vertical cabinet, the bottom would be the left or right side… So for a 4 player cabinet, this wouldn’t look good for one side (left or right)… Or is it just me and what I saw? Thanks

[@ArcadeOrigins]

🦊Thank you so much for doing this tutorial video. It has definitely given me the confidence to do the modification myself and I know I'll enjoy the cab much more now! Did you have any problems with the holes lining up with the screws for the monitor casing?

[@19kfox]

No alignment issues at all.

[@Rgna1989]

In what moment you replace the 30 pin cable im putting a 19 inch on my xmen vs street figther😊

[@joshhardin666]

Personally I think all these arcade1up cabinets are too small and too expensive. I'd like to see a minimum of a 24" display on all of this stuff and a 30-36" display on stuff where it makes sense (such as the lightgun games stuff and maybe a special mortal kombat cab) I think the arcade1up stuff is awesome in terms of the art and packaging, but they should really sell full-ish sized cabs for the prices they are charging. though they *should* be thinner due to the lack of crt. they got that part pretty good.

[@bcrt2000]

I'm curious, is there a 20" monitor with led backlight that you could use a similar method with and connect directly via LVDS instead of going through the geekworm adapter (which could introduce lag? I'm not sure if anyone has confirmed what the latency on these are). I understand mounting the 20" monitor would be slightly different, but would love to see a video on this if it's possible

[@timmyj7092]

I have the 30th anniversary cab, and I’m not as concerned about the side view so much as how pixelated the screen looks. I’m wondering if it is possible to get the high definition screen to portray the graphics as nicely as an old CRT screen? People keep saying it’s about scanlines, which I turned on in the options but it doesn’t look as good still. Any advice?

[@jahbrony3650]

so the only reason for this mod is because of lihting?

[@kjmullinz]

Not bad! Amazing video! There may be a second life for my cabinet after all lol. I'm still concerned about the input lag I've noticed on my MK 30th cab. When playing it on the original monitor, and then playing it on the new dell monitor, have you noticed the input lag getting any better with the new monitor, or do you feel the Never was any input like to begin with? ... It could be the fact that I haven't swapped the controls out for Suzo Happ brand parts yet, or could be the crappy monitor or combination of both. ....your thoughts, bud?

[@19kfox]

I didn’t notice any lag. To be fair I don’t consider myself an authority on MK so it may be there. 🦊👊🏼

[@kjmullinz]

@@19kfox gotcha, thanks for still uploading an awesome video regardless. Looking forward to finding me a good deal on a replacement monitor. 👍

[@atulshrivastava2235]

youre awesome fox! i hope this is doable for all their cabs going forward which use these garbage 5:4 monitors

[@lucaferraris7599]

Hello,but having a modified taxi with Raspberry is it possible to directly connect a monitor or a 4:3 TV with the HDMI cable?what problems could I have ?Unfortunately, the original monitor broke

[@abnerrodriguez7954]

Looks the same!

[@bobmaslen2970]

Would this fit vertically in the wave 1 galaga cabinet?

[@DjIdea]

I am in need of some help. I just tried to upgrade my mk screen following this method. However I’m trying to add the hdmi board to it so I can run my pc build on it. But now after trying to connect to hdmi board I have a white screen. Could this be a problem on the hdmi converter or could the problem be where the connection from new screen to old cable? Please help I’m getting a white screen now

[@19kfox]

Connect the stock Arcade1up pcb first to make sure it displays the image correctly. If it does then the hdmi board is the issue.

[@Bushidotrees]

I already did this mod but this is soooo much cleaner... I may end up switching it up so it looks close to stock. Taking that monitor out if the machine Is a pain in the ass and I'm not sure I wanna take that ride again lol

[@petermacnab1871]

Will it be a pain with this new monitor ? What do you mean by looks close to stock ? There is no drilling etc right ? Can the bezel get damaged easily ?

[@Bushidotrees]

@@petermacnab1871 I have already done this mod with the method he spoke about drilling holes and such. His method keeps the cabinet looking stock without the extra board and drill holes. The pain in the ass is getting to the original monitor as you have to take the marquee off , speakers and that's the part that's difficult to work with and I. Not sure if I wanna go through all that hassle but I just might because of the stock look

[@Bushidotrees]

@@petermacnab1871 if you haven't built the cabinet yet then this will be very easy to do, it already is easy. getting the original monitor out once the machine is built is the hard part

[@petermacnab1871]

@@Bushidotrees I would be afraid of scratching or damaging the cab. But at Jesse no drilling with this mod. How long did it take you ? The marquee comes off easily though right ? 🤔 it would be great but I don’t think about it when I’n playing but seeing it bothers me a bit .

[@petermacnab1871]

@@Bushidotrees I built it already 😩

[@R3LAPS3productions]

According some info I've gathered the Dell E1715S is still a TN panel which is the same type of panel as the MK30th. Does anyone know if there's any good BOE pc monitors that could be a replacement?

[@PaoloEmanueleVallini]

Hi, great tutorial! I found a Dell 1708FPb used for few bucks. Does anybody know if this could work? Thanks

[@ydeardorff]

2007fpb is unobtanium at a reasonable price

[@19kfox]

At this point I would just buy the MK Deluxe when it goes on sale.

[@fubi0688]

Did an upgrade when it first came out. Those tn panels they ship with are a disgrace!

[@mwrightinsurance]

Do you know why they chose the TN monitor when there’s been nothing but complaints about them? I think every single person who bought this cabinet or wants to buy it would happily pay the difference for an ips display. It’s almost like they intentionally do one thing wrong on every cabinet.

[@19kfox]

It was a supply chain issue. New MK Deluxe has an IPS monitor.

[@jfacura]

Can you show how plug the wire because i try m'y killer instinct screen and the screen only flash and the wire are the same so i dont understand how can plug the pc screen . Thank a lot

[@Jason_Moorhees]

Love this. However, if I’m going to take the trouble of taking my cabinet apart, I feel I’d rather put a 19 or 20inch monitor in there. Are there any larger compatible monitors out there?

[@19kfox]

The P1917S that I used on the Golden Tee XL should work but I have not tried it myself.

[@daviddeming1916]

Fox, will this work with Pacmania and Centipede cabs as well?

[@TheCornerCade]

Does the Pac-Mania cab have washout!?

[@daviddeming1916]

Hell yes...looks horrid!!

[@TheCornerCade]

Thank you because they had this one at Best Buy and I was thinking about getting it but I changed my mind‘ I wanted to wait to see if it had it or not

[@TheCornerCade]

Do you guys think the new Capcom legacy will have wash out as well

[@daviddeming1916]

@@TheCornerCade its 50/50...we will see...hoping the capcom isnt screwed up

[@toddwarsing5929]

Could this been done with a 19” ?

[@lildivaaa411]

Do you think this same monitor swap would work for the Defender 40th Anniversary Legacy cabinet?

[@robertholland6800]

Thanks for the video, I may have missed it but could use this same monitor for the new centipede (legacy) cab as well? Thanks.

[@19kfox]

I haven’t done the mod on that cabinet but it should be the same.

[@kdj29]

Now that this video is 1 year old, and your bff's over at Unico have made a replacement monitor 17" for A1up and mvsx, do you still think this Dell is the way to go or is it Unico?

[@19kfox]

The Dell, no question.

[@josepulido7522]

Would the Boe monitor from the first mortal kombat work on this new mortal kombat 30th anniversary cabinet?

[@ribiflibi]

I want to change the monitor on my cab also because it looks like s**t . The main question here is : does this improve the look of the game ? Because with the stock monitor it look pixelated like hell , try sonya vs sonya on MK1 looks horrible. Viewing angle don't bother me since I'm playing in front of it and not from the side . Thanks

[@classifiedcalli1731]

Will this work with other Arcade1up cabinets?! Final fight, Street fighter 2, TMNT, Simpsons etc?? thanks so much.. I got a Final Fight cabinet for free because it won't power on! I'm 95% sure its the factory monitor. I would love to buy one of these, IF it will fit. Any input would be awesome! thanks for the video!

[@19kfox]

It should work with all 1st Gen Arcade1ups.

[@classifiedcalli1731]

Awesome! thanks so much!@@19kfox

[@Dj9fingers]

If replacing monitor, can you change to 19” or 20”? Which model works plug n play?

[@N4PP4]

Do you think that at some point as arcade1up starts to get BOE stock back then they will start putting them in the new builds of mk 30th? as it seems they are now using again BOE for the new SF and MVC2 cabinets.

[@19kfox]

I hope we get a re-release with BOE monitors. MK fans deserve better.

[@WerewolfKweef]

As an owner of a few of their products, I'll build my own cabinet before supporting Arcade1up going forward. These clowns put zero effort into their machines, charge astronomical prices, and are clearly only worried about securing IP rather than delivering a solid experience for a very faithful consumer community. Their QA hasn't improved much since they started out either.

[@PCGGC]

The licensing of the games is the most expensive part of these cabinets. Just like the $70 "mini" consoles that come out with 20-25 games on them, you pay for legal. I've been pretty happy with all the arcade1up machines I've encountered\worked on\bought myself so far. You're basicallly paying $200 for the screen and speakers and processing, $100 for the cabinet, $40 for the riser, $70 for the games license, and then they are taking $40-90 pure profit on top of what they are saving for the mass materials

[@blessedchild3142]

I agree with you. Very low quality. Monitors a Have zero options for functionality. Hardly any scanlines functions,. Basically you have to mod the thing to make it worth while. It's really better to go through a company like Xarcade, Tulsa arcades, to have a quality build.

[@KingsOfStony]

I’d rather not spend hours and hours designing, buying, cutting, sanding, painting, stickering, etc. a cabinet. The raw materials needed to buy will be expensive because nobody sells a piece of wood shaped like a cabinet. The cost of the leftover material combined with all the tools needed would probably be about the equivalent or more of a brand new cabinet. Their wood is CNC cut, your hand-router is going to need lots of sanding afterwords to get those nice edges. Sure, you’ll have one over the course of couple weeks or months depending on how much free time you have after your regular job and daily/weekly responsibilities. I’d rather pay $400-$600 and enjoy my free time and have a pristine cabinet arrive in a week, but that’s just me.

[@TecraTube]

is there a manual for this new cab?

[@TheCornerCade]

So we need the inverter board to complete this mod with the monitor that is in the description correct?

[@19kfox]

You only need the Dell monitor. The lcd panel is a direct replacement for the stock MK30.

[@TheCornerCade]

Thank you!

[@TheCornerCade]

We also want a review on that KI coming Saturday!

[@SamanthaMunitz]

I have a 19" Dell 4x3 monitor. I'd like to connect it to my Arcade1Up Dragon's Lair cab as secondary monitor. I'm told connecting it from Dell's VGA port to Arcade1Ups USB port won't work. What do I need to make this happen if at all possible?

[@19kfox]

You need a Geekworm LVDS in and LVDS out to HDMI board. geekworm.com/products/lvds-to-hdmi-adapter-board-converter-with-lvds-cable

[@liljazzy4021]

Fox - do you think this swap would work on the Dig Dug Namco Legacy? I just assembled it and the monitor is similarly shoddy.

[@19kfox]

I did the swap in the new Pacmania cab. Check out the video here: kzbin.info/www/bejne/hJicd5ujaLdqj6c

[@liljazzy4021]

@@19kfox you’re a public servant

[@ProtonPackGuy]

Hey 🦊! Question for you. I was able to install the mod with your help here but I noticed the contrast still appears to be brighter than my other cabinets. For instance when I adjust the volume, I noticed the green volume font that’s a very distinct green on my other machines is more of a light blue on this machine. Is there any way to adjust the contrast on this guy? I want to see if I can use that volume slider as a baseline for how it should look.

[@JP-rk8ok]

Did you buy used? If so, Im wondering if the previous owner changed the settings and your still seeing them. I installed a brand new one tonight and the colors looked correct and as expected during all game play. It’s possible the volume bar graphic is simply a different color on this cab, though I don’t recall what color it was when I tested after the swap earlier. But gameplay colors were correct.

[@GlenBaisley]

@19kfox Hey Fox, would a 17" BOE monitor from the Ms. Pac-Man Partycade work in the MK30th, Pac-Mania, or Golden Tee 3D cabinets? Would it be plug and play?

[@19kfox]

I don't think so, the aspect ratio is different.

[@GlenBaisley]

@@19kfox I am going to be doing a monitor upgrade for Big Buck Hunter and replacing it with a 20" Dell. Would the A1Up Buck Hunter work in MK30th, Centipede or Pac-Mania? I think Buck Hunter Is a BOE monitor.