Pixelcade Arcade1Up Monitor HDMI Conversion

[@harpersbigadventures4121]

Is there a way to keep the same board but just add a hdmi input to switch between like the factory games to like a ps4

[@1LXNNY1]

Fr what I'm trying to figure out

[@waterinthedesert81]

I just put my HDMI converter board on my new Street fighter Dynamo my Marquee plugged into the HDMI converter board it's not lighting up 😕

[@gaboaaa23]

hello, can you please tell me wich hdmi vga board I need for a mortal kombat 30th aniversary 1up cabinet? Ive read on amazon that there are several type of these boards, Thanks!

[@opengadgets]

I would not know sorry

[@gaboaaa23]

@@opengadgets thanks

[@Recroom347]

I’m so when I turn it on, it’s just a blank screen like there’s light but no picture

[@waterinthedesert81]

Why isn't my Marquee lighting up again new 3rd Strike Marquee and nothing smh I thought I would just plug it into this board and it would just light back up its the plug next to the speaker plug right???

[@apillarofash]

That first ribbon cable you disconnected, do you need that for any power??

[@opengadgets]

Nope, it’s no longer needed with this mod

[@johncolby769]

Any idea what screen upgrade options there are for the Atgames Legends Ultimate? Lots of people doing the arcade 1up but not one video on the ALU.

[@opengadgets]

Hi John, we do make an LCD marquee for the ALU which is in stock creativeartsandtechnology.com/product/superpixelcadelcd-alu/. But it will not work with the ALU software native at this time and only will work if you are connecting an external PC or Pi to your ALU.

[@buddyheph]

Red light came on. You never had a signal...How did you fix that issue ??

[@billym916]

Did you figure it out ? I have same issue

[@frankthetank6621]

Did u get a static picture by any chance, cuz when I put my board on the back of the monitor I was getting some static particles.

[@opengadgets]

have not seen that

[@radikalmodz]

Hello i have an hdmi converter board my indicator lights up green but turns red after about 10 seconds any idea on what could be the issue?

[@opengadgets]

Guessing no hdmi signal detected ?

[@TheAccountant1000]

How can I get my LCD monitor to show the marquees on my Hyperspin PC the only thing that it shows is the main PC screen

[@opengadgets]

If it’s a non pixelcade marquee , it’s a matter of setting up hypermarquee

[@TheAccountant1000]

@@opengadgets ok great thanks, that’s what I figured I wonder if their is a great tutorial video to set up HyperMarquee

[@robwoodruff1844]

How do you hook your control deck back up???

[@opengadgets]

Added usb encoders with joy2key , full build here www.instructables.com/Arcade1Up-Mod-With-LED-Marquee-and-Sub-Displays/

[@tfhm6086]

Hey i just did this and am having a problem with it turning on. The little light on the controller doesn’t even come on. Any help?

[@Junkjet00]

Audio not coming out to speaker ?

[@opengadgets]

For this install , I used a separate audio amp with line level audio from the pc

[@Junkjet00]

@@opengadgetsthank you

[@chavowooproductions1689]

Anybody know of any ways to hookup a tv remote to the board?

[@MiKeFish2012]

Someone please help i was juat messing with my lcd controller on my tmnt arcade 1up and there was some setting second up from the bottom in the lcd controllers settings called like dcm or dcrm or something like that i have no freakin clue bc i cant see anything on the monitor as of now aside from lines...all i did was set this feature to on because it said on or off so on made the screen a bit brighter so im like ok go with that now have these damn lines runnin all through it and idk wtf it is i have a rpi3b hooked up to it and a mini pc via an hdmi splitter and i thought it might have been a sucky signal comming off the hdmi but it was doin it for the mini pc and the pi so im summing it up and saying.its something with the lcd controller anyway to reset this i also unplugged the power and plugged it back in same crap goin on aside from unplugging hdmis and reconnecting them aswell someone please help!

[@Marcfj45]

Can i foud something like that to plug a wii but with rca jack ? I want to build a shooter on 1up arcade

[@opengadgets]

I suppose so, you would need an RCA to HDMI converter

[@creed200569]

For some reason im not getting any signal to my monitor

[@silverandblackentertainment]

Does that board have hdmi output, or just hdmi input? I would like to output it to a bigger monitor

[@electroarcade]

This controller board is for the Arcade 1Up screen. If you went bigger screen you would go straight to its HDMI from whatever you are using be it PC, PI, Pandora etc.

[@RoTeNdO]

Correct me if I'm wrong, but this replaces the actual game pcb, yes?

[@opengadgets]

yes correct, in this installation a PC is being used for the games , the arcade1up stock PCB is no longer used (there is no way to integrate Pixelcade with the stock arcade1up PCB)

[@kevinthorn9672]

@@opengadgets how do i leave pcb in and play the game while im doing this? Cant have both so just redew it if i wanna play the pcb?

[@Ace-tw5db]

I did everything but I have no signal. Please help

[@kevinthorn9672]

No signal how do i fix black screen?

[@SickleSlash]

Do you attach the ground to the board if you have a gen 3 cabinet?

[@opengadgets]

i'd assume you still want to ground it

[@ramen947]

This works on other consoles such as a Nintendo switch right?

[@opengadgets]

emulated switch through an arcade front end is supported but not stand alone/native switch

[@michaelbernhardt389]

someone need made a switch bord so you can go back to using arcade1up board

[@jca5422]

Any issues with your screen shorting out?

[@opengadgets]

no, there is a layer of insulation in between the PCB and the metal on the back of the monitor

[@juliangalarza2028]

You need to do much better, well truthfully I would never feel comfortable ever leaving any work I've done. Thats so not in any way an intelligible way to do things. Do it right man