Plug n Play WLED Controller: 5v, 12v, 24v Compatible! Full Walkthrough.

[@ChrisMaherDIY]

🔥Amazon’s BEST Deals (updated daily): amzn.to/4aaLjCO ☑Check out my sponsor to begin your FREE 14 day trial to Aura: aura.com/chrismaher WLED Controller with Mic: amzn.to/49uttJx WLED Controller esp8266 Version: amzn.to/47IuL2q ============================= Support My Channel Directly: Become a monthly contributor on Patreon: www.patreon.com/ChrisMaherDIY Buy me a Coffee: paypal.me/ChrisMaherDIY ============================== 12v WS2815 Strips: amzn.to/491aKFa 12v Power Supply: amzn.to/422SSra 12v Cob Led Strips: amzn.to/423kRqW 12v Power Supply: amzn.to/422SSra 24v Cob RGBW Lights: amzn.to/3STgCLx 24v Power Supply: amzn.to/3SpB1Xl WLED Settings for 24v Cob RGBW: SK6812. Color Order: BRG. Swap: W & G. 5v SK6812 Led Strips: amzn.to/3S6ptaX 5v Power Supply: amzn.to/48R3PP6 5v WS2812B Led Strips: amzn.to/3tYxpmI 5v Power Supply: amzn.to/48R3PP6 For some reason I cant get the below strips to work with this controller. Maybe you will have better luck but it seems like there is something about this specific strip that does not play nice with this specific controller. But the below lights do work perfect with the Domestic Automation controller linked below. If you try 12 or 24v strips with the Domestic automation controller, make sure to watch this video first: kzbin.info/www/bejne/h5nHmId9abiYq7s 24v Cob Led Strips: amzn.to/424vI3H 24v Power Supply: amzn.to/3SpB1Xl Wire Stripper: amzn.to/3O5XEhW Domestic Automation Plug n Play Controller with Mic: amzn.to/4b5UqVq Domestic Automation Plug n Play Controller no Mic: amzn.to/48uRgZP Video for Domestic Automation Plug n Play Controller: kzbin.info/www/bejne/h56wqKWFiqeSodk Best Diffuser Channels: Spotless Diffuser Channel 1m Amazon: amzn.to/47aIujz Spotless Diffuser Channel 2m Amazon: amzn.to/3QoHeDb Diffuser Channel 1m or 2m Muzata LED Store: bit.ly/3NHG5Uw Spotless Corner Diffuser 1m Amazon: amzn.to/3DFhRpf Spotless Corner Diffuser 2m Amazon: amzn.to/3Krqw2q Spotless Corner Diffuser 1m or 2m Company Site: bit.ly/3D3yI4R Gaming Room Setup Video: kzbin.info/www/bejne/gZPFfHSuo9V2h7M Wooden Circular Design Video: kzbin.info/www/bejne/g17UhZ1mrLiGl7c The best way to help support my channel is to like, comment, make sure your subscribed and share my videos with as many people as you can. The other way is to use my links above as I get a small % at no extra cost to you if you buy something. Thank you all for the support!

[@RR-rm6ge]

Love your network name!

[@Krakenled]

Hey Chris, athom have been making these for a long time.

[@ChrisMaherDIY]

@@Krakenled Thanks for watching and taking the time to comment! Yeah they for sure have been around for a bit but for some reason they have never sold them on Amazon in the US. The majority of people that watch my channel are from the US and we have been spoiled with free 1 or 2 day shipping to the point that when I do leave links to the same products on Amazon and AliExpress hardly anyone ever buys from AliExpress even though often times it's cheaper there. I'm not sure what shipping times are in outer countries but in the US most things take about 2 or 3 weeks to ship when ordering from AliExpress.

[@Krakenled]

@@ChrisMaherDIY You inspired all my work. U gave me all my ideas on future projects. I'm lucky to have an engineer helping me with my work. Your channel is an inspiration to ppl like me

[@InsaiyanTech]

@@ChrisMaherDIYhey by any chance can I get govee Leda and combine wled to it with this?

[@alexgrahams222]

I am not electrically inclined but after 8 hours of research and piecing products together I think I have my solution (I hope it all works)...wouldn't have been possible at all without these videos. Thanks Chris!

[@tensiondriven]

Your writing is exceptional, @chris - I expected a basic walkthrough, but you included tons of important details, along with some of the reasons/context about them. Really exceptional writing!

[@kb0cow]

Wow thanks Chris, love learning about esp32 and WLED with your videos

[@ChrisMaherDIY]

Thanks for watching buddy!

[@trvswst]

Thank you so much! I was intimidated to dive into ESP32 and WLED, but your clear instructions and product pairing made it feel accessible. I just set up my first set of lights, and I couldn't be happier.

[@KodaTora]

at approx 3:00 you mentioned keeping the amps to 4 because thats the limit of the jst connectors. would it be possible to go the full 8-10 amps if you just cut the jst connector off and put the wires from the strip directly into the controller?

[@EvanWasHere]

Ditto on this question

[@victorkapadia9061]

I m curious as well

[@ChrisMaherDIY]

Thanks for watching and great question! If you cut off the jst connector and use the wires on the strip I would maybe then go up to 6amps. The wires on the strip are either 20 or 22 awg which are pretty thin. If I wanted to go higher than 6amps I would then solder my own thicker 18awg wires and then go up to 9amps if needed keeping it a little below what the controller says is the max which is 10. Hope that helps!

[@KodaTora]

thank you for the clear and detailed answer!@@ChrisMaherDIY

[@IntermitTech]

Sadly cutting the wire off won't help much since those aren't the limiting factor is the LED strip itself, not the wires. Whatever diameter wire you attach to a generic ws28xx strip you will not get more then 4A into a single edge connection or about 8A into a middle connection. The strip just has too much resistance on it's copper tracks to allow for more hence why we need to do power injection to combat "voltage drop" (which in actuality is combatting the resistance by adding more copper). There are controllers out there which have power distribution and fusing all on the controller itself, but not on Amazon.

[@elliottszarowski695]

Hey I have been wanting to redesign my room for a long while now and was stumbling upon this channel with your room setup. I also hated my old “dumb” rgb strips that were around 10 bucks on Amazon and wanted a better solution. I have already spent Sever hours watching videos on your channel with everything I could possibly need to know to get started with WLED and making my own projects, but I will definitely be copying your amazing table when I saw the end result I gasped. Well done your videos have been amazing giving me confidence to actually start this and not use a cheep option that looks way less good.

[@bubbl_media]

5:18 How do you think you can detect a voltage drop when the LED strips are all still on the roll?

[@jmcguire56]

I love the COB lights so much.

[@ChrisMaherDIY]

They really are awesome! Have you done any fun projects using them?!

[@jmcguire56]

Fun? No. lol I used them for under cabinet lighting in the kitchen and some under desk lighting in my home office.@@ChrisMaherDIY

[@ChrisMaherDIY]

Lol I hear ya! I put some under my counter and we still use them every single day. Makes a huge difference!

[@jmcguire56]

@@ChrisMaherDIY We do too. I have them connected to Alexa, works great!

[@revolutionwakeup104]

GREAT video, simble and informative! U just went straight to the important stuff, been scrolling trugh many videos thats just a mess trying to explain

[@tobiasfunke]

Thanks so much for your videos, they've been very helpful on my journey to set up some cool LEDs in my kid's bedrooms. Have you looked at or tried the dig2go? I would love a review from you or some insight on your channel, it looks like a great all-in-one and easy way to get some lights set up.

[@iggy_ing]

Do not auto update the firmware currently. It will disable the microphone settings and you have to flash it manually to the audio reactive version.

[@Krakenled]

I've been using the athom controller for a long time. This product isn't new. Update it to moon modules wled which is the best sound active version of wled

[@TestCycles]

How do I flash it manually

[@Krakenled]

@@TestCycles U can upload modules and patches via wifi thru a PC

[@TestCycles]

@@Krakenled Thank you. Will try that.

[@jimxu8732]

@@Krakenled Hi, is there any link to get the update files?

[@EbikeCarlos]

Bro thank you !! So simple I'm picking up a couple for my projects .

[@ua7pyro591]

Wow this is nuts! I'm really glad this stuff is affordable now

[@agentsmithmmxm]

This is what I was looking for! I have had so many headaches with the quinled stuff as time has passed.

[@abrarchowdhury5078]

Hey Chris do you think you could make a video about custom led puck lights and using wled to control them?

[@jasco927]

Hi @ChrisMaherDIY. I’ve many of your videos over the years and recently purchased this controller after watching this video. Since buying it I haven’t been able to get the sound react to work, after researching it turns out it doesn’t come out of the box working like that, it requires an install. Your video made it appear as though it worked out of the box. Can you show how you got the sound react to work on this Ericsity controller? Thanks for all the hard work and great content you put into your videos.

[@AlbertoMayagoitiaHill]

Chris and all the Chris community. Here is an open question: I purchased all the items on this video and followed all the instrucions up to minute 5:42. However the intensity of the led lights is not bright enough. I think I have three options.... 1) use a 24 volt power supply; 2) Do power 12 V power inyection for each led strip... or 3) Raise the automatic brightness limiter to XXX mA. Anyone knows the solution? Alberto. Houston TX

[@claromiamor]

Alberto, did you fix it? Because I was wondering to make the some setup 15m of LEDs, have them with the 2 GPIO outputs (7,5m each) and I was gonna get a 12v 10A power supply, and I don't want to have power injections or some, cause it will look awful. Let me know something about that

[@mdd83646]

I got brighter LEDs by changing xLight / Controllers tab / selected device / Protocol: DDP (instead of the default E131). As DDP is an auto-discovery protocol, I'm sure I just set my E131 settings wrong, giving the lights lower voltage... but DDP doubled brightness for me.

[@OmairArif]

Is the data output from this 5V or 3.3V? If I used this would I still need a level shifter if there is 15ft between the controller and strip

[@vicbcn5455]

Subscribed when I saw your SSID ;)

[@ChrisMaherDIY]

Yeah buddy!

[@3papproductions103]

Chris, your videos are the best! So helpful! Will you create a tutorial regarding WS 2812 LED panels?

[@Krakenled]

Do u mean matrix panels?

[@3papproductions103]

@@Krakenled yes. I have an 8 x 8 ..haven't figured out how to configure with wled

[@Krakenled]

@@3papproductions103 There is section for matrix. Personally I haven't setup matrix panels. I have 32*64 and 8*32 panels but wasn't happy with what wled can do. There is a new release soon but there is also night driver software for matrix. There are plenty of KZbin vids on using matrix with wled

[@JLLG2]

For 5V SK6812 RGBW lights, why does WLED setting need to be GRB? This makes no sense to me and I find nothing referencing this. Please help a newbie :)

[@elicitone]

On the Amazon link, what is the difference between "MIC" & "Mic with Download"? (on the product image a UART logo is on one)

[@ChrisMaherDIY]

Thanks for watching! From what I've read, the UART version has a micro usb port on the board that you can access by popping off the white main housing. This would be beneficial if you wanted to connect directly to your computer to do updates instead of over the air. I have not played around with the UART version but my understanding that is the only difference.

[@elicitone]

@@ChrisMaherDIY awesome thanks.... love your vids.... i have watched a bunch of them... keep up the great work!!!

[@Kamkazee]

Was wondering how you made spiral template to mount leds in spiral. please elaborate..thanks.

[@victorkapadia9061]

Hi Chris great video! I ordered 20 meters of the BTF FCOB WS2814 DC24V 784LED/m 70IC 10mm width version. My question is will this controller be able to run 15,680 leds? Led strips calls for 24V 3A power per 5m, hence my total load would be 12A but the Ericsity controller rated for 10A max. Your thoughts?

[@LOWROLLER199]

My WLED app does not have the sound setting tab as shown at the 3:27 mark. The manual says to access that to configure the mic. How do I get the mic to work or get this sound setting tab to show? Any help would be greatly appreciated.

[@victorvek5227]

Would you say the SK6812 are you favorite LED strip at the moment? You do so much, and talk so fast through everything, that I can never tell what your “go-to” stuff is at the moment!

[@BadAssPercyJ]

this was awesome, thanks for sharing!

[@pryceg.5460]

I need help...for the first example you showed, if I wanted a higher brightness than 4000 would I need to cut off the connector and solder the wires together or what do I do?...I'm working on a tray ceiling and I need about 50-60 ft of LEDs, your video is amazing and has been the most helpful so far pls help.

[@corvusgaming1577]

4000 is more than enough brother

[@pryceg.5460]

@corvusgaming1577 thank you

[@corvusgaming1577]

ur welcome. I personally have it capped at 4000 and at 50% brightness my eyes hurts😂

[@adaptedbythedans]

Your videos are the best.

[@Tijlemanz]

Hey Chris, great video. I see that you connected a 5v ledstrip (5 meters 60 led pm)? If so did you notice the limit the controller gives (10A) where de 5v Ledstris needs more (18a), how does that affected the strip?

[@arunskuviyam]

Thanks for this video. I am facing a problem with my btf 5m led cob lights. When connected to the Gledopto controller with the prescribed 12v 5a power supply i get flickering and random colour problems. Looks like it is to do with the level shifter. Any advice on this please ?

[@gyulaandor2161]

I have the same problem with a 24V WS2811 LED strip. 3 Gledopto controllers produce the same issue. The same LED strip and PSU works fine with an Athom controller.Has your problem been solved since then?

[@arunskuviyam]

@@gyulaandor2161 Hi, I found out that if you have a long wire coming out from controller to the lights then this could happen. Its solved for me by cutting the wire to a short length. Hope that helps.

[@clellbritt3434]

Is it possible to add an external button with this controller so that the controller can be hidden?

[@imagamejunky4652]

Great videos. One thing I'm not sure of is the benefit of running 24 vs 12 volt. I understand that with greater voltage you can run smaller gauge wire. Why would I want to purchase the 24 volt instead of the 12-volt? I'm going to put LEDs around the perimeter of my game room. 88 feet. Would I be better off with the 24-volt? Will I be able to run all 88 ft off of one power supply? I'm assuming I could run 2 44ft strips off of one controller. Any help would be appreciated

[@bwsct]

Could you show how to wire this to power that doesn't plug in to an outlet?

[@thekinghat]

Thanks for the informative vid. Any suggestions if the wled app can’t find the lights? Connected phone and lights to same network but still the lights not found.

[@johnkrajewski]

At 3:27 it is mentioned that the button can be reprogrammed to cycle through presets. Anyone know how to do that? I looked into the macros section hoping there would be something already set there that could be adjusted but that wasn’t the case. Thanks.

[@layeredwork]

Nice video, BUT... What is that levitation headphone stand at 7:11 ? 😳

[@LG-wp6ge]

Wondering if you can do a video using the module for turn signal lights and sequential and stuff?

[@humbertodelgado1018]

How can you do hard wire this led strip to a home switch?

[@Barberbydefault]

nice video,, i have a barbrershop and i want to put led, wich set up of the one you listed is best to provide brightness, 12v or 24v ?? thank you

[@ChrisMaherDIY]

Thanks for watching! I'd go with the 24v!

[@ThomasFreundl]

Does this have a logic level shifter built in? I'm having issues where I want to connect 8 1m strips in parallel, but they get weird after I connect more than 2. The wifi isn't usable and the lights don't respond. I've tried a signal amplifier with no luck

[@ThomasFreundl]

As a follow up I just returned it and bought and ESP32 and just went old school DIY

[@NRML_NKCNM]

which controller supports apple home kit? Can such controllers be connected to a regular power bank?

[@--JohnDoe]

Question. I want this automated by google home. When you apply power to the controller, do the leds automatically come on? Or do I need to go into the app every time?

[@BatcheeReact]

So the controller says it supports max of 800 LEDs, but I see you connected 1200 and it runs fine. Is it safe to say it can control more than 800 LEDs?

[@djduffy5]

Got the Same question

[@NickeyMouse]

I do believe the 800 LED restriction is per data line, not the controller itself.

[@SirChiefUK]

How do you sync that to the tv light the Phillips Hue Sync box? I think this has more features and more fun…

[@coryballard8864]

Couple quick questions if you don’t mind. Looking at the BTF lighting WS281 4 32 foot Cobb strip and the. Alitove 24v 144w. Wondering if I can extend the strip lights past 32 feet and if so, would it require a power injector. I’m also looking at the ericsity wledesp32 to control everything and not sure if that has any length limitations. Thanks so much just getting into this brand new.

[@angeljaimes3277]

I wish they can make one of this controllers Apple HomeKit compatible, so I can integrate it to my eco system and have some cool automation wit all my others lights I know Apple HomeKit has a lot of limitations but for example all the lights at my front yard at night are set to stay at very low brightness very very nice amber colors but when motion is detected all lights change to bright almost day light and look amazing and when the sensor stops detecting motion all my lights return to the low brightness… awesome video thanks for sharing

[@claffy78]

Good day chris, i would like to add some lights to my home project but my ? is i am looking at 100feet of running lights to circle my cealing. can this set up run all these light or will i need a booster. also i would love to add the motion lights on my stairs. 2 stearway. please give me some advise. thanks,

[@Muglass]

Should you use a fuse for this kind of setup?

[@aijokker]

Is it possible to make led curtain or some kind of matrix with this controller?

[@edwardhamalian3569]

Can that controller be used for outside my home led lights?

[@collagevids1]

Can this work with the eufy permanent outdoor lights to sync with music, domestic automation is not sell in Canada

[@GhostofTatooine]

love this controller as it supports the full range of voltages, it is now in my basket. It, or something that looks similar but a different name, is available in the uk.

[@ChrisMaherDIY]

Awesome! Glad there is something similar available over there!

[@AIRW0LFA567W]

yes, does look the same but it does not say its got a built in mic like the one in this video

[@jayjosephtv]

Which one did you find, I’m struggling to find one in the UK

[@AIRW0LFA567W]

@@jayjosephtv type in GLEDOPTO WLED LED, hope this helps

[@AIRW0LFA567W]

@@jayjosephtv GLEDOPTO WLED LED

[@racecarchar]

Can I power this with a 20v tool battery directly? Or should I run a 12v step down converter?

[@israelbr4019]

Can i use to connect to a CELL PHONE'S HOTSPOT network???? Since where I want to install 3 of these devices I don't have wifi I hope you can help me thanks community

[@nickbrockelman]

Yes, as long as your hotspot supports the number of Lights you will have attached to it and whatever you're using to control it with like your phone. Just need to know what the hotspots name and password is when you set it up in the app software. He mentions this when he talks about if setting up on his home network. You will just use your hotspot information instead of your home network information please note that most Wi-Fi hotspots especially if they are based from someone's phone will often have a low-power or Les use or timed power off

[@IzenOla-up3ld]

Much love ❤thank you for this 🙏please keep up the great hard work, content and videos

[@codysones7164]

Will this controller remember what preset its on if i wanted to power it with a light switch? For under cabinets in the kitchen so for day to day i could just have a switched receptacle and pre-set to white? Or would i need to do that with the controller button/app every time?

[@deansiddall3729]

great information and video. what would you say would be the longest led run you could do with each strip and what power supply would be best. i probably want to do about 20m but think i may be better doing on lots of different runs. i would prefer the cob strip but it seems a lot.

[@user-ermakos]

Hey buddy you truly inspired me to go ahead with the setup that you have.. can I ask just a question I'm not sure if you mentioned it already but what's the maximum length of SK6812 or maximum led lamps that you can go with the same 5v power supply?

[@matthewdearden8097]

Hello, great video. I have watched a couple of your videos now and subscribed to your channel. I have purchased 3 x SK6812 RGBW LED strips as I need a 12 m run around the perimeter of my room. What power supply would you recommend for my setup? Cheers Matt (UK)

[@death057]

In the final display you said you were using the cob lights as well as the WS 2815 which was the first ones you set up right what does the WS2812 look like does it look as good as the 15 or should I just get the 15s?

[@Gejoepee]

Hello Chris, thanks for the video. I would like to use led strip and this controller for custom automotive headlight applications. Since it will be high intensity and flowing do you suggest APA102 over other strips? Please help

[@JKaKarot27]

will this work wit ha 4 pin rope version of leds if i cut the 4 pin connector off?

[@MrBfish]

Awesome video. Thank you! One set of questions: I am trying to add lights to 2 short bar shelves (one is about 3 feet long and the other is 5 feet long). Can I cut the SK6812 strips? Do I lose the rest of the 5 meters or can I somehow reconnect the cut pieces? Or are there shorter strips (1-2 m) available that are equivalent and compatible? TIA

[@sanford1561]

I'm planning to use the BTF-LIGHTING WS2815 Light Strip and ESP32 WLED Controller with the power supply you recommended for my Kitchen remodeling project for the accent lights on top & under the cabinets. If I play music will the MIC on the ESP32 allow the light strip to match the beat of the music? Also, can I connect this Controller with the Alexa App? I didn't hear you say anything about that in your video, so I was curious before I purchased it on Amazon. Thanks again for the Full Walkthrough video.

[@danielefr]

I can't figure out if I can use the second output with a cct strip... Would it works? I can't find an answer anywhere...

[@vicbcn5455]

Hey Mate! Im looking for a cob strip rgb cct IC. At the moment is not available, the seller only has rgb ww / rgb nw or rgb cw. Do you think with Neutral White will enought to generate with rgb the WarmnWhite and CoolWhite?

[@MRES3]

Whats the differences of this and the domestic automation one?

[@bitsurfer0101]

Do the COB LED's typically come with the pre-installed diffuser?

[@bennyben8390]

Yes. They not visible LEDs like the other strips.

[@ajandali]

If you can make a video to show what's inside this controller and compare it with the normal esp32

[@rutgerdezeeuw]

What voltage led strip is good for what? I would like to make some sort of wake up light in the bedroom, should I pick the 24 volts?

[@AIWriteBlog]

Please make videos with generic esp8266 board and 4 pin led strip ... where there are two data wires along with vin & ground.

[@ChrisMaherDIY]

Thanks! I'll put that on my list of projects I would like to get to eventually! Thanks!

[@atiq982982]

Why does the description on the cob led strip say they don't work with wled but in your video yours work?

[@enlnh]

Hi @chrisMaherDIY you really should make a video about non-addressable strips (like the btf cob ones or cct strips) and mention that this controller does not support those types of pwm strips. There are practically no videos on this and took me forever to figure out why this controller didn't work for my FCOB warm white strips.

[@uses0ap]

What are your thoughts on QuinLED's Dig2go controller? Seems like a very good value for complete plug & play solution for $50-65.

[@HoundDogCatia]

Is it possible to connect multiple strips to the controller directly, or would each strip need its own controller? If so, how can you sync them?

[@dignan17]

I've tried to use this controller with the btf ws2814 but wasn't able to get it to work. I'll have to give it another try...

[@LeviBahn]

With the 5v, sk6812 strips, can you connect 4, 4m strips like the first example with 1 power supply without any power loss? If no, how big does my power supply need to be without power injections or is that unavoidable? Thanks!!

[@jfgagne17]

Great stuff Chris. Always very informative! Can the controller be updated with the latest WLED firmware?Cheers

[@NoName-nb9qi]

Can you please help. I am trying to finish my son's Gameroom and I want to add LED strips to the top part of the wall. Can you please provide a list of things I need. Room measures 11ft x 11ft. Thanks

[@ChrisMaherDIY]

Thanks for watching! I would watch this video for a good breakdown of what I used for a larger install. All the links should be in the description of that video on things I used. kzbin.info/www/bejne/iaGnkJmem7Vor9U

[@matthewdearden8097]

Hi Chris,... anyone had any issues with the wifi setup on this? I can connect to my home wifi but a static IP doesn't seem to work and setting to DHCP picks up an IP not in my home wifi subnet but strangely enough I can connect to that IP. Factory reset doesn't seem to work either, pull the power 5 times. I am on version 0.14.0 of software there is a 0.14.1 maintenace relase with a few bug fixes.

[@JerryDerGlatzkopf]

do you have revommendations for ww/cw LED strips and controller? i wanna make some ambient lighting in my kitchen and hallway. nothing over 5m and im unexpirienced in this. used only govee lights until now but for this i dont need RGB or adressable strips. just dimmable and with good whites :D

[@Sound.Church]

Hey Chris! Love these options! Do you have a recommendation for strips that bend sideways rather than vertically?

[@3papproductions103]

Great question! Id like to know that as well!

[@normangoodger9047]

@ChrisMaherDIY, thanks for finding new things to simplify LED installs.. Quick question, the controller with mic, can you disable the mic, or is it all dependent on what is selected in WLED as to whether the chosen settings use the mic or not?

[@ChrisMaherDIY]

Thanks for watching and great question! It depends on the effect you choose. The mic will only engage if you select an animation/effect that is a sound react one. You still have all the non sound react animations and effects available that you can choose where the mic will do nothing on those. Hope that helps!

[@steveanimatrix3887]

you can disable the mic in WLED "sound settings" section

[@waiser4604]

Hey Chris, very nice video. I was wondering how important is it to get the exact number of LED's on a strip correct?

[@LikelyLagging]

What is the difference with the Esp8266 board?

[@wolfik7393]

I want to connect 15m of 5v led strip, but im not sure if the controller can do it. I wanted to connect 30led/m or 60led/m strip.

[@arthurbernardes1]

Hello Chris, congratulations on your video, I really like them all. Does this controller not need to add a resistor if the tape is too far from it?

[@tjdreyer]

I'm wanting to put some of these around the rear of a a 16' long church stage. Was there a reason you went 12V over 24V? Awesome video!

[@nooneunique]

have you put a 2nd led strip on the spiral yet?.. you have another side that is empty and having 2 led strips, they would face each other by default in most places. meaning, you could get some interesting color mixing between the 2 opposing led strips facing each other in that wooden spiral etc... cool video thanx

[@WhiteGloveReview]

Hey Chris. Am new to your channel and WLED. What plug and play wled controller/addressable led strip/ motion sensor combo would you recommend for stair lights project?

[@skilltradesmanco.8636]

Can i run these without my home wifi. Wanting to put these lights in my work van.

[@UsMisguided]

I was thinking the same for gold cart gnna try it out I think

[@noeneonmusic]

So the ESP32 Boards I bought are useless?

[@ChrisMaherDIY]

Thanks for watching. Here is the video I made on getting an esp32 set up to work with WLED. kzbin.info/www/bejne/m6mkiK2Dm9Kqh5o

[@Krakenled]

You can mod your esp

[@Krakenled]

Athom have been making these for a long time. They have a mic, 16a relay and screw connectors, not push. This controller isn't new or revolutionary

[@nelsonflores67]

Can you use the wled controller and have different zones or ill need to add the esp32?

[@Dantestoussaint]

Legendary. Thank you Chris.

[@christianvaldezdiez3722]

Hello! I do have 20 led strips WS2812B 5Vof 480 LEDs each, how would you recommend to control them all? I am actually using 1 Esp32 per two strips but thinking to update if possible

[@wesleybrandon1906]

I’m having trouble with the power supply. Do you have to to have the 5v power supply connected? I have 12v leds and I tried to connect a 12v power supply to the line inputs next to the barrel plug and the controller doesn’t turn on. Thanks!

[@igeeko2706]

hey Chris awsum video! i have a question for some reason the Athom controller that works with individually adressable Led strip lights is not available on amazon any idea why? and also between those two what would you suggest to be the best opcion or both are fairly good keeping in mind the Athom controller can withstand 15amps thankyou in advance!

[@donut132]

My cobs wont really respond to my settings. I have to set my 24 foot to 150 leds. What power setting should i be using? I put it at 2000maw