OX do make a great pipe cutter. I have used their ratchet one before and it is a real game changer when the space is tight. Build quality is spot on. I would be happy with a Ox Polyzip Flex pipe cutter is my toolbox.
@worldartsuk2 жыл бұрын
Talk about perfect timing, I'm currently fitting out my new canal boat and have been looking for a suitable pipe cutter and was not sure which product would be best, I have a Prowarm underfloor heating being put down, an Impey wet room going in (all inspired by following your channel James) and plastic water pipe feed throught out the boat, this Ox Polyzip would be a god send or a James send in this case, either way love your videos and thankyou for making plumbing doable for us amatures.
@douglas44872 жыл бұрын
Very cool tool. I would like to have seen close shots of the cut against a square
@richierich41752 жыл бұрын
I am so itching to get my hands on these. I love tools that make life easier. I do a ton of DIY and I would love these in my tool box. Holt Tight!!!
@getbry74522 жыл бұрын
Hey James. Good video Looks like great tool. I did buy the Knipex BiX but couldn't get on with it because it would track the pipe so went back to my trusty Rothenberger snips. But always looking for alternatives, especially for those tight spaces. The BiX does allow the blade to be positioned closer to the outside edge of the cutter so you can cut exiting waste pipes flush with the wall: an enhancement for Ox perhaps? 👍🏻
@apmgold2 жыл бұрын
Great review of a great set of tools. Nice to see that is manufactured in the UK and that the obviously listened to plumbers when they went through the design process. Great to have them in the bag taking up very little room. I can't wait to use them.
@garyredfern53032 жыл бұрын
I love ox tools. I brought all the tiling stuff they make on the strength of your bathroom refit. I would love these cutters as well.👍👍
@mistermikeanson2 жыл бұрын
That's very quick and gives a great cut. Great for us DIY amateurs too! Could you also reverse the blade to use the other end?
@ahhjenko2 жыл бұрын
I have a few ox tools, such as the ratchet copper pipe slice, and a plasterers Hawk, both are brilliant bits of kit. So I need one of these beauties in my life! Cheers for another great vid 🤘🤘
@randolphgrannel3632 жыл бұрын
I love this pipe cutter, it would make my life much easier
@gurajsingh97132 жыл бұрын
I’m an apprentice and Would love to add this to my tool bag ⚒️
@scottemes63832 жыл бұрын
I’m new to plumbing and I’ve been looking for a clean plastic pipe cutter for a long time. My “hack” saw cutting ability is about as good as a chocolate teapot.
@georgedrewry23112 жыл бұрын
I miss my 40mm plasticut, gone to the loft gods forever
@nocode16032 жыл бұрын
Yeah I've lost a few tools to the loft gods as well 🙏 lol
@davehunter69202 жыл бұрын
mate.. ox tools ...? bought some olive cutters ...absolute crap
@digidyda68132 жыл бұрын
Ox=legends
@UKMadMike2 жыл бұрын
This would be perfect for the tool bag saves having the big hefty rothenberger pipe cutter. That gets dropped alot. The flexi looks like it will bounce back in my hand once dropped 🤣
@siwateck Жыл бұрын
knipex bix, knipex bix 20 -50mm nuff said!
@smoll.miniatures2 жыл бұрын
Versatile over the pipe 😂
@champ74108 ай бұрын
Before you replace the blade, you can just turn it over.
@Shandybrother2 жыл бұрын
Looks like the blades might be reversible.
@NFAQ12 жыл бұрын
Sod that. End up chopping my fingers off
@meuk6929 Жыл бұрын
£22 quite reasonable. Cheap if you cant cut straight 😂😂
@davezxtt2 жыл бұрын
Almost a 12min advert for ox, good pay day there.
@ecnamelcyrrah2 жыл бұрын
Looks like you can turn the blade around as well do get two uses out of one blade?
@daveoconnor50842 жыл бұрын
Just starting my plumbing journey at 62 years old. This would be a great addition to my new tool bag. Give us old newbies a head start. Starting a plumbing course soon just to help me and the family with their homes.
@dillsplosion53342 жыл бұрын
Seems to it solves a problem that never existed, just my opinion . Hold tight
@WhiteCrowFarm20 сағат бұрын
So much wasted time.. you could have gotten the pertinent information done in less than 2 minutes.. also, stop telling people to like and subscribe, more wasted time..
@tonygoshive7852 жыл бұрын
Wow just wow.. what a good product that! I am still cutting mine with a hacksAw and sometimes with the scissor type cutters, sick of squashing them pipes!! I really think I should win some of these cutters because i just love ox so much, and you know what! If I don’t win, I am still going to get some myself! 😂 liked and subscribed with bell notifications! Love your videos with your personality! Keep up with videos! :) 👍👍
@jamesh95122 жыл бұрын
Looks great but I wish you’d of tried to push a fitting on the end of the waste pipes to see how easily it goes on, I’ve had many different cutters but they seem to leave a very slight ridge that you need to chamfer down in order to get a fitting on, not just push fit even solvent weld fittings are a struggle to push on and off if you want to do a dry fit first.
@paulosmeek62864 күн бұрын
Do you actually rate this product...they are shite. No clamping slippage - the hard plastic version is better and cheaper
@drcl74298 ай бұрын
just bought a polyzip 35 for £12 from City Plumbing and returned a rothenberger manual cutter to Wickes that was £18 that did nothing but crush ABS 32. If I had seen this video before I would have bought the C2. Ox make some great products. Plastic Pipe sizes are a bit mad. I was looking for a 32mm rotary cutter for 32mm pipe. Decided to actually measure it with a caliper. Definitely says 32mm on the label but outside diameter is 35ish. 32 is ID, just thought I'd share so you don't waste your time and think you're going mad like me.
@killerbean99112 жыл бұрын
Where's the soil pipe version? :P
@richardmccann9293 Жыл бұрын
Seems Amazon only sell the C2 size now, can't find the C1 anywhere! =( Shame cause my Rothenberger pipe shears can't cut 15mm pipe without squashing the end into an oval!
@neilburton8131 Жыл бұрын
I wasted $ 54 on one yesterday and my conclusion is it's ok for thin walled pipe no good at all for 40/50 mm pipe will stick to my recip saw Score 5/10☹️
@dimitar4y2 жыл бұрын
.... it's a flexible piece of plastic with a stanley in the middle of it. Actually why was this not slamming every store for the past 10 years while plastic has been polluting our planet to death? Even 3D printers can make these.
@alandurden1826 Жыл бұрын
quick question for you, I hope you can help. I have been looking for a tool for splitting flexible silicone tubing. (past,
@jayseabie2152 жыл бұрын
How much are they gonna cost? I'll swap you a fridge magnet for one, hell I'll swap you 2 fridge magnets and a packet of Japanese crisps!
@martynbuzzing33272 жыл бұрын
It's a shame the so called plumber didn't use something like that when he fitted my new bathroom. The pipe parted company two weeks after he left. Flooded the stairs and came through the kitchen ceiling...
@SteelPanTrust10 ай бұрын
Hi, amazing, can it cut really small like 1/2cm of the pipe?
@kyleengland11252 жыл бұрын
Would love to win a pair of these on my nearly 3rd year into plumbing, would really come in handy on this holiday home job I'm installing 40+ water meters onto 25mm plastic mains pipe
@danadkin86522 жыл бұрын
Need a cutter for my 3d printed project that uses 50mm pipe and this fits the bill! Dont need a C1 just a C2
@samrichardson98279 ай бұрын
wish this could cut soft tube as well. It's so hard to cut a DMV scleral contact lens silicon inserter's base perfectly flat so it doesn't fall..
@lastlast2078 Жыл бұрын
So why did they change the design to a non-flex? This one seems to be discontinued now. Was it just so they could sell multiple tools instead of one?
@mattbandura90152 жыл бұрын
Nice advert 🙄
@Tigerratcat8 ай бұрын
What do you guys recommend for clean easy Pex A/B cutting?
@danohagan86112 жыл бұрын
I should win the C2 because I need ut in my life and for knackery damp kitchen sinks lol
@mattharris72482 жыл бұрын
It will be interesting to see these up against the knipex bix , as the bix does I believe 15-50 mm all in one , has a spare port for blades , only main difference is the bix you can move the blade closer to the edge of the plastic so it can cut closer to the wall, also I’ve just retrained as a plumber , so slowly getting my tools together so these would be a great advantage for me in my tool bag
@killerbean99112 жыл бұрын
the knipex starts tracking up the pipe after a while, I hope these dont!
@mattharris72482 жыл бұрын
@@killerbean9911 I see , thanks for that , I was close to buying one , but il wait and have a look at these ox ones
@richardablitt9799 Жыл бұрын
I can’t cut straight for toffee so this would be great to get a job done quickly without cause a flood
@ZanderKaneUK2 жыл бұрын
Looks like the blade is reversible as well James? Flip flop over for 2nd wear at new edge?
@gurprasadsingh4792 Жыл бұрын
Well done Great video
@mr_nice.2 жыл бұрын
Pretty sure it can cut those PEX-AL-PEX pipes too. Nice tool.
@rogerg4916 Жыл бұрын
A standard copper pipe cutting tool will do the same thing with small pipe sizes.
@Smallzy932 жыл бұрын
I’ve been looking for something like this! Can’t wait to get my hands on them. I’ve just had carpal tunnel surgery so need something to help me! I love the OX ratchet cutters you done a video on sometime back one of the best tools I’ve bought!
@mrfr872 жыл бұрын
These are awesome. Really want to get these but can’t find them for sale anywhere!!
@nikitagm50152 жыл бұрын
I would still rather go for the Knipex DP50 really
@adamdavis5612 жыл бұрын
Unreal piece of kit! Loving how one tool can cut so many sizes! My recent purchase of Knipex pipe cutters have really disappointed me as they don’t leave a nice cut every time and are harder to use then my rothenburger pipe cutters. Would be be amazing to win one of these bad boys! Great tool review James!
@neilburton8131 Жыл бұрын
Thanks for the review about knipex pipe cutters
@rickhanley96522 жыл бұрын
I defiantly need this as I don’t think I’ve cut a pipe straight yet 😂😂
@jamiecraze1772 жыл бұрын
Yes please ! This would be so handy !especially when I’m on caravans and come across a mixture of solvent and push fit pipe, plus one slice in the bag to cut space , love it !
@fergalmurray7282 жыл бұрын
Where can I get my hands on this in Ireland . Please help so much plastic pipe
@g.johnson31192 жыл бұрын
very impressed with demo and product James. since Ridgeons started a big Ox display here in Norwich I have never been disappointed with Ox tools. currently use single sized cutters which are a pain so would love to have these in my toolbox👍
@jamesduffy50192 жыл бұрын
Great piece of kit James! I purchased the Ox copper ratchet cutters after your review some time back, and now this beauty! Just a good bit of wrist action and a loverly clean cut! I’d love one of these! Another great vid from the “Prince of pipe work “
@DanielSmith-yk5tg2 жыл бұрын
As a new self employed plumber, the first bits of kit I bought were by Ox. The ratchet cutters are my favourite thing ever and don’t put a little dent in the pipe like other cutters. I’m sure these plastic cutters will be just as good and I can’t wait to add them to my kit 💪🏻
@michaelcarton2782 жыл бұрын
One word description for these cutters " simple" lol
@Mrbobinge Жыл бұрын
Flip the blade over to use its other half of cutting edge.
@jonnno1002 жыл бұрын
Not so good when the pipe is stationary and you rotate the tool though is it?
@pearcemachineshop52002 жыл бұрын
It looks ok, but when is a company going to make one that chamfers the end of the pipe at the same time, a must for push fit pipe.
@dimitar4y2 жыл бұрын
so what you need is a giant pencil sharpener, lol
@nikitagm50152 жыл бұрын
What you really need is the Knipex DP50 mate, best solution to me.
@dimitar4y2 жыл бұрын
@@nikitagm5015 Ayo thanks for that, didn't know it exists, it does a small chamfer and that's perfect.
@MrJelsboo2 жыл бұрын
You keep hittin the gym an your not gonna fit in the shot! 💪🏼
@garyhartley71482 жыл бұрын
Very nice bit of kit. I can’t wait for the day something similar comes out for boiler flues!
@grimawormtongue201426 күн бұрын
What do you use to cut the flue down?
@whisperseightytwo45602 жыл бұрын
Holding tight until they're available!
@thevideoark2 жыл бұрын
I love it. It looks idiot proof, just right for me. 😄
@zero.6972 жыл бұрын
Hi James love the tools but can't find the flex C1 and C2 can you point me 8n the great direction. Great channel
@plumberparts2 жыл бұрын
They’re out next week I think…
@nickcollins75682 жыл бұрын
Love it. Now if only it could cut 10mm pipe too
@jonathanalder1206 Жыл бұрын
The blade is reversible. Just flip it.
@PT4LifeYO Жыл бұрын
15-28mm. Pointless!!!
@oliversmith82202 жыл бұрын
These cutters are just what I have been looking for, I have been looking to get some cutters and I'm glad I waited for this, my bag is already over filled using a hack saw and shear type cutters to do the same job, I love how these cutters because they do 25mm mdpe and 50mm waste pipe that way even with other pipe slice cutters I would have brought, it doesnt mean I still need to hold on to the hacksaw and shears in my bag for those sizes
@joshuawhitefield-lott30832 жыл бұрын
Have you seen the knipex version of these? I highly recommend a comparison
@jtplumbingdrainage68882 жыл бұрын
Is there a large version of this tool?
@fixitfoxcw2 жыл бұрын
Great! They've fixed a problem that already had a solution. Replace 1 tool with 2. Use non standard blades. And you're fishing for positive comments!! Great 👍 well done...
@dimitar4y2 жыл бұрын
uhhhhhh.... basic plastic pipe cutters work for all of that anyway though?... £5 off any hardware store, snaps pipes up to like 60mm like it's butter..?
@yensabi2 жыл бұрын
Think you will need to change the blade very often as it will start tracking just like the Knippex Bix cutter does , about 10 cuts and its blunt , it can be turned end to end like a Stanley blade but a pack of 3 blades is about £ 6.... 👍
@MrJameskearney2 жыл бұрын
As always great video James, I'm a king DIYer and would love to have something professional recommended by you in the toolbox...
@jackfield53752 жыл бұрын
I think i should have it because I’m a regular viewer and learned a lot from you through my apprenticeship. Also would be appreciated😂
@loafersheffield2 жыл бұрын
As sharp as my wife's tongue or as accurate and focussed as the lasers that come out of her eyes? Why, I think NOT! Problem being, she wont fit in my tool tote. In fact, if she's a passenger in the van and I take a left hand corner, the corner is taken on 2 wheels.
@johncoppock3823 Жыл бұрын
Great tool, and great video. Been using a set of JG snips for a few years (small dia only) rotate them around the pipe as best you can. The Ox 🐂 has thought about it all, and love the spare blades avail (key to cutting, a sharp blade). Can you do a video on larger waste pipe sizes and how to do a.proper job. Thanks again.
@CaptWonkyAir2 жыл бұрын
It’s another amazing Ox tool … on a par with the ox multi claw hammer that now in most tool bags after that was recommended by yourself…
@nilzno92 жыл бұрын
Brilliant bit of kit. As a competent DIYer I am planing to renovate my bathroom, this would be extremely useful. Especially as I can't cut a straight cut 😄.
@samclerkinoliver2 жыл бұрын
Best ideas' are simple !
@nocode16032 жыл бұрын
Yeah I'll be looking out for the c1 for cutting my conduit I think ox make fantastic strong fit for the job long lasting tools cheers James 👍
@gadgetman362 жыл бұрын
If you want to use a saw to cut plastic - use a tenon saw, not a hacksaw. You’ll get no swarf. For straighter cuts use a wooden mitre box.
@steverushaw87612 жыл бұрын
What a brilliant flexible tool. Just starting my Camper Van build and it would make my task so much easier…
@neilhazell90572 жыл бұрын
That's one good tool!!! I'm a sparky and this would be so handy hate using a hacksaw 😂😂😂
@kierendorrington76992 жыл бұрын
Looks like a great bit of kit I need one as I have been using a hacksaw blade without a handle for the past 10 months as someone helped their self’s to mine and didn’t return it 😂
@dannyhammond56122 жыл бұрын
Would loves these used a similar one by knipex and I've had 3 different ones definitely getting one of these!
@killerbean99112 жыл бұрын
I really hope this is a good product, there's a competitor version that's similar but after about a week of use it starts to track up the pipe, looks better built though! Would love to give it a try and well done ox again!
@mhrfish2 жыл бұрын
Savage product,like you say made with the end user in mind.these would be a welcome addition to my diy bag.love the videos,keep em coming.thanks to your videos my diy plumbing holds tight!!!
@unitkj2 жыл бұрын
Impressed! I’d love one of these! I’m off to line up every bit of plastic in the shed lol
@stevedoherty40222 жыл бұрын
I hope they are better then the standard ox cutters. They start off being amazing then they start to track! Be interesting to see the difference between these and the polyzips
@joeb16422 жыл бұрын
They look awesome, would like to find out how long the blades last. But easy to change once needed. Would be a perfect addition to any plumbers/sparks toolkit.
@websitesthatneedanem2 жыл бұрын
I've never cut a plastic pipe straight .... ever!
@gadgetman362 жыл бұрын
Use a tenon saw instead. Your cuts will be squarer, straighter and you’ll get no swarf. For squarer straighter cuts use a wooden mitre box as well.
@1977howie2 жыл бұрын
Sooo could of used this on my last DIY job! Looks like a good investment 👌