PLUMBING IN AN OUTDOOR DOG WASH… How to plumbing

[@paulm8690]

Good work Mark, Clear, straight forward and with a tip included. Never letting down the masses.

[@MJTiffPlumbing]

Thanks Paul 👍🏼👍🏼🙏🏼

[@marcush6139]

So glad you posted this video I actually have one to fit tonight and I wasn't sure how to do it until I saw you to come across your video cheers for that

[@MJTiffPlumbing]

You are welcome buddy 👍🏼👍🏼

[@dellboy2404]

Lovely jubilee, nice job I will be fitting one soon pal

[@MJTiffPlumbing]

👍🏼👍🏼

[@wittywoo9559]

@@MJTiffPlumbing nice little unit .. what's the customer expecting to pay for a job like that .. ?

[@DaveMartin-jc7nc]

Enjoyed that, thanks Mark.

[@MJTiffPlumbing]

Glad you enjoyed it

[@mx986]

I did one of these last year. Exactly the same unit. The customer bought it herself online as a specialist dog shower for £120. Didn't have the heart to tell her it's a camper shower and she could have got it for half that... Hats off to the person who sticks a picture of a dogs head on and knocks them out at double price though !

[@MJTiffPlumbing]

Hahahaha……

[@stevenmercury1669]

hi just fitted one of these for a customer she very happy only down side for me is the 2 comp sockets in the wall would be good if they did copper tails ( like bib taps) keep up the good work

[@MJTiffPlumbing]

Thanks mate…👍🏼👍🏼 That’s just the way they are designed, if you do it right they are all easy enough to shut off, unscrew and pull out of the wall if there’s an issue👍🏼👍🏼

[@Joe-ev5rw]

This is a nice little job…. Will be recommending them for everyone who wants a hot garden tap to wash the dogs. Cheers mark

[@MJTiffPlumbing]

They are a great product

[@DjGiluk]

Great idea - really enjoying your videos 👍🏻 I’m a DIYer and I’m picking up loads of tips from you so thank you

[@MJTiffPlumbing]

Thanks buddy, glad your enjoying the content

[@kanegoffe5364]

Glad you filmed this, I brought 1 to fit at a customers house when I was back last year, between buying and the job I'd researched enough to put me off using it, read about having to use the whale fittings only and people saying doesn't hold up to pressure etc I ended up sending back and using a standard shower valve with isolated box in the end. I'll man up and brave it next time.

[@MJTiffPlumbing]

These are spot on mate, never had an issue with them 👍🏼👍🏼

[@rush211251]

I used push fits on mine , seems to be ok 👍

[@dirtydog2312]

I normally fit a blending valve and an outside tap for dog washing but that’s a nice neat alternative

[@MJTiffPlumbing]

👍🏼👍🏼

[@rubbersteve123]

Sorry to see you have gone to the dogs! He he. Great content mate as usual.

[@MJTiffPlumbing]

Hahahaa….. 😉

[@samfoo341]

What a nice kits to fit. Nice contents as always and looking forward on your next video. Good work

[@MJTiffPlumbing]

Thanks as always Sam

[@matthewhoult7641]

What a great piece of kit👍 Thanks for showing me something new Mark, I will recommend these to my customers 👌

[@MJTiffPlumbing]

They are a great product mate

[@theoddjobcentre6686]

@@MJTiffPlumbing great haha but we wouldn't have the hot water for it haha

[@richardsedorski1206]

Nice one perfect measuring as per usual great stuff.👍👍👍🐶🐶🐶

[@MJTiffPlumbing]

Thanks Richard 👍🏼👍🏼

[@garyredfern2542]

Nice gadget. Funnily enough I am putting a hot water tap in for my dad tomorrow for dog washing. Great video 👍

[@MJTiffPlumbing]

Everyone wants a dog wash at the moment🙌🏼🙌🏼

[@glyndavies591]

Neat job Mark handy bit of kit

[@MJTiffPlumbing]

Thanks mate, yep it’s a proper smart little unit 👍🏼👍🏼

[@stephenmcgrath2976]

Hi hi mark fantastic idea will get one myself what did you use to cover the hole under the work top inside please ? Just to make a neat job ?

[@MJTiffPlumbing]

I used a cover plate buddy, nice and neat

[@rush211251]

I fitted one at my house a few weeks back , the hole I made was just a little too big so I couldn’t screw it back to the wall so had to use clear sealant to hold it in position . It worked a treat though .

[@MJTiffPlumbing]

I guess you could of used something like CT1 or Dura+ 👍🏼👍🏼

[@silentking408]

I will be always here to watch your videos

[@MJTiffPlumbing]

Thanks 🙌🏼🙌🏼

[@rorlegger1]

i installed the same in my Adria Motorhome, works perfect

[@MJTiffPlumbing]

Great bits of kit👍🏼

[@derekloudon8731]

Neat unit. I can get one fitted so if the missis ever locks me out at least I can have a shower 😆 I am so glad the tools went to a young lad, it will save him a fortune and he will not have to buy cheap crap to get going 👍

[@MJTiffPlumbing]

Thanks Derek, yes I’m so pleased an apprentice won them 👍🏼👍🏼

[@markcleminson4107]

Nice video Mark, what a neat idea. Great for filling paddling pools

[@MJTiffPlumbing]

Yep it’s a great unit

[@mikegallagher2107]

great tips there mark nice install neat and tidy i was gone use a shower mixer but ill try this now thanks top man 🙌👍👊

[@MJTiffPlumbing]

Thanks Mike, these are so much better buddy

[@MrSagsta]

Looks nice and neat and practical for many. I've already have a hose and I've just added a hot tap with Y splitter. Feel that it is more versatile as I can use hot water through my jet wash whereever necessary

[@MJTiffPlumbing]

Yep you use what you prefer to mate 🙌🏼👍🏼👍🏼

[@jasoncole6979]

Great video as always mark, looks a great idear

[@MJTiffPlumbing]

Thanks mate

[@jasonsimpson3348]

Great idea I've recently put a blending valve in for my dog washing works great but blending valves can be unreliable so if it goes will definitely swap to this Nice video Mark 👍👍

[@MJTiffPlumbing]

Thanks Jason 👍🏼👍🏼

[@chrisholt2474]

Hi Mark, I think that is brilliant, I’ve never see one of those before, not even on a caravan etc. Great film as always and a nice bit of pipe work to settle my OCD, fantastic. Have a good rest of the week, take care, as always, regards, Chris. 👍👍👍👍

[@MJTiffPlumbing]

Thanks Chris…. Little dedicated short video this week for what is a great unit 👍🏼👍🏼

[@chrisholt2474]

@@MJTiffPlumbing perfect, thank you. 🍻👍👍👍

[@kingofthetrowel1725]

Nice job mark as always 🙌🏻🙌🏻 and well done to the lad who won the gear bet he’s med up 😁 nice one 👍👍

[@MJTiffPlumbing]

Thanks mate, yer he’s proper chuffed

[@Smart_fix]

Looks so neat and clean Mark thank you for upload this useful video I shall get me first customer soon 🙂👍🏼❤️💐

[@MJTiffPlumbing]

Thanks Fred…. It’s a great unit

[@SuperWayneyb]

Looks a decent bit of kit 🤘😎🤘☕️🫖🍰

[@MJTiffPlumbing]

People love them mate

[@cdrom_8986]

Top work as always mate 👍

[@MJTiffPlumbing]

Thanks buddy

[@loving-plumbing]

We once did a dedicated bathroom for a dog. This is a much better idea! Good work.

[@MJTiffPlumbing]

No way!!!!!….. the whole bathroom!!!!!

[@jplester9719]

Mate thanks for this honestly didnt even think of something like this before today summer is coming up this could be good for business can see many people wanting this fitting.

[@MJTiffPlumbing]

It’s a great little job to put out to people😉

[@Applumbing74]

Class video definitely be fitting some works well 👌

[@MJTiffPlumbing]

They are great mate 👍🏼👍🏼

[@steviegvxr]

Love this channel!

[@MJTiffPlumbing]

Thanks mate 🙌🏼🙌🏼

[@micky7028]

Do you have to be CORGI registered to fit that dog shower mate.

[@MJTiffPlumbing]

Brilliant 🤣🤣👏🏼👏🏼👏🏼

[@Tom_Plumb_PHS]

Took a second, that's truly ruff.

[@colinscoines144]

Hi, what core bit did you use for the Bullfinch showers, please?

[@MJTiffPlumbing]

Think it was a 2” core

[@robp1245]

Nice video. Does this blend hot and cold to give an in between hot and cold water temp or is it either hot or cold? Thanks

[@MJTiffPlumbing]

Yep mixed hot and cold

[@robp1245]

@@MJTiffPlumbing thanks. Looks ideal for me👍🏻

[@kirkyboa]

Great video and brilliant idea. Im looking it install one of these. What diameter diamond core did you use

[@MJTiffPlumbing]

Thanks buddy…. I’m sure I said in the video

[@rastageordie7338]

Hi mate do you mind me asking how much you charged for supplying and fitting this please cheers

[@MJTiffPlumbing]

All depends on what’s needed to connect to, where the job is and what your rate is…. So different all over the country

[@rastageordie7338]

@@MJTiffPlumbing ok mate cheers

[@alandarby9366]

Well bud I bought the erbauer drill in Screwfix as I seen you said it was good is the core bits hard on it would you drill concrete block or is it just able for brick ?

[@MJTiffPlumbing]

Don’t have a problem drilling anything with the erbaurer to be honest mate

[@alandarby9366]

@@MJTiffPlumbing that's sound il try it thanks

[@appos1234]

Love your videos

[@MJTiffPlumbing]

Thanks Rob…. 👍🏼🙏🏼🙏🏼

[@peterdawson5115]

Nifty bit of kit Mark, all those dog lovers will be after one, you should be on commission for them. 👍🚽

[@MJTiffPlumbing]

Thanks Peter…. They are a great unit 👍🏼👍🏼

[@iainmackay7354]

That looks a great bit of kit....just one question could you not solder straights on instead of compression fittings in wall.

[@MJTiffPlumbing]

You couldn’t solder straight on as it would melt the internals of the unit…

[@martinkiely3147]

Great video mark on fitting this unit looks smart little idea what water pressure do you get out of it.i have seen people having with two outside taps fitted one cold and other hot I suppose the only advantage with that is you can wash the car down with hot feed on a hose pipe.it’s a pity that unit doesn’t come with longer hose as would work great 👍

[@MJTiffPlumbing]

You can buy longer hoses or adapt what’s there if need be

[@killerbean9911]

Great little video, curious could you solder or maybe pushfit onto the back of the unit tails? not saying I will do either but curious if it would work

[@MJTiffPlumbing]

You could use push fit bit not solder as you would melt the internals

[@killerbean9911]

@@MJTiffPlumbing Thought as much, shame you can't solder really with the joint being in the wall cavity Also been meaning to ask you, where did you get all the different connections for different filters for the magnacleanse?

[@russelliott4556]

Great video Mark 👍 Thinking of doing one myself, very clear instructions, just wanted to know what you use to cover the hole on the inside? Any help appreciated thanks Mark

[@MJTiffPlumbing]

Thanks buddy…. I use a pipe snug 👍🏼👍🏼

[@antoniogalluccio4213]

@@MJTiffPlumbing 2 inches pipe snug?

[@leightonboard]

Nice idea would possibly benefit from tmv in side for nice temperature for the dog

[@MJTiffPlumbing]

Thanks mate, yep that’s an option

[@ianbrooks6816]

Need one!

[@MJTiffPlumbing]

Great ain’t they

[@PROPOSITONMAN]

Very nice

[@MJTiffPlumbing]

👍🏼👍🏼thanks

[@johndekoven7549]

I live in Edinburgh, Scotland. If I could find a plumber that would return a phone call I would love to get this installed (but that's another story). I did have one Plumber who's been responsive but he's saying I can't install this because I have a hot water heater. Here was his exact explanation: "With an old type water cylinder you wouldn’t be able to get the mixer in video or a mixer tap as you have unequal pressures. The only thing you could get would be a hot tap but you wouldn’t have any control over the temperature". Does anyone know if this is correct?

[@MJTiffPlumbing]

I’ve fitted them into cylinder fed systems and it’s been fine…

[@Михаиллеви]

Tested without a dog 🐕?! I was looking forward to you struggling to keep them still. Need a dog lead hook up on wall also !

[@MJTiffPlumbing]

I only install it, I’m not paid to wash them aswell 🤣🤣

[@antoniogalluccio4213]

Nice one! Is this product wras approved? Do you have a link to that?

[@MJTiffPlumbing]

Link is in the discription buddy

[@jonwillock3594]

How much would you charge to fit one of these, unit, fittings, labour, the complete job

[@MJTiffPlumbing]

I charge from £300 all in, depending on Pipework location

[@deanholloway7755]

How did you fix the shower curtain? 🤪

[@MJTiffPlumbing]

🤣🤣…. With some sky hooks😉

[@Wilso1661]

what core drill set do you use ?

[@MJTiffPlumbing]

This one is from Screwfix…. Really good👍🏼👍🏼

[@MySmadge]

How much for the unit? What size core drill do you need?

[@MJTiffPlumbing]

Link in the description to the unit mate….👍🏼👍🏼

[@MySmadge]

Got it thanks mark

[@MySmadge]

@@MJTiffPlumbing core drill size?

[@SHEZZAMAN1996]

@@MySmadge says on website 60mm

[@delboy6384]

Spot on for the wife when she’s been working her ticket

[@diddywright6165]

Nice content mate👍🏻 so are you saying that my 150bar pressure washer is not really suitable for Fido?! 🤔😂

[@MJTiffPlumbing]

Hahahaaaaa that would cut Fido in half 🤣

[@TheMaintenancePlumber]

Be good for car washing to filling up the bucket on a cold day

[@MJTiffPlumbing]

Indeed mate…. Great unit👍🏼👍🏼

[@loafersheffield]

We, the missus and I have a cross breed. 1/2 Shiat-Zu, 1/2 Poodle. A ShitzPoo. He was in his bed licking hiss balls. Said to missus, " I wish I could do that" She said, "give him a biscuit and he might let you!" Woof, woof!

[@MJTiffPlumbing]

🤣🤣

[@joeglover9791]

Is there any other fittings instead of compression that can be used, don't like using compression were I can't access if something happens in the future. Not moaning just curious mate, Great work and tidy👌

[@MJTiffPlumbing]

I guess you could use pressfit couplers if you use that mate 👍🏼👍🏼 If there is an issue in the future it will just unbolt out… same as it went in👍🏼

[@markrobinson1458]

Its a nice Idea but I usually fit a hot tap next to the cold, becoming a regular item, dogs are getting soft these days 🤣👍

[@Михаиллеви]

How does that work ? Attach one of those cheap bath tap attachment shower hoses.

[@MJTiffPlumbing]

Thanks Mark…..👍🏼 Yes that’s an option but this is mixable from source and looks a hell of a lot neater

[@JesusisLord78]

Are there any plumbing jobs available?

[@MJTiffPlumbing]

Plenty about mate

[@paul_my_plumbs_uk]

Full bore!!! MAGICCCCC

[@MJTiffPlumbing]

🙌🏼🙌🏼

[@Aut251]

This is bizarre….a customer asked to fit one of these yesterday 👌

[@MJTiffPlumbing]

They are all the rage mate😉

[@mickobyobrien2650]

A bloke advertised s&f of these on local f.b. chat page, everyone wants one,easy money 🤑

[@MJTiffPlumbing]

Oh mate, they go like hot cakes mate😉

[@john170277]

Why not just use a hosepipe for washing the dog down

[@MJTiffPlumbing]

Why not indeed… However, “just a hosepipe” only gives cold water as I’m sure your aware.

[@PMJ4]

Dogs have fur to keep them warm !

[@Михаиллеви]

Dog washing is mainly done after winter walks. Might kill em !🤪

[@jplester9719]

@@MJTiffPlumbing Also some people might not want to unwind a hose everytime they want to wash their dogs with this bit of kit just chuck it in the draw when youe done.

[@mickbroadbent6750]

nice kit m8 might get 1 to wash the wife when she gets back with the dog 🤣🤣🤣🤣🤣🤣🤣🤣

[@MJTiffPlumbing]

🤣🤣🙈🙈

[@matthewcalder4351]

Wont be long untill your being asked to fit an aqualise shower mixer plus accessories concealed in a lockable gas box 🤣

[@MJTiffPlumbing]

I’ve had one person all ready ask that and I refused….. aparrently it’s a thing🤷🏼‍♂️🤷🏼‍♂️

[@matthewcalder4351]

@@MJTiffPlumbing lol 😂

[@Christoffer2000F]

Why not press instead of shitty compression ?

[@MJTiffPlumbing]

Because if ever there is an issue you can remove the “shitty compression” fittings and the unit is fine…. You can never please everyone on the internet

[@matthewstevenson8795]

Well said! Never had a problem with compression. Bit of paste on the olive, no issues at all. Great video btw.

[@MJTiffPlumbing]

@@matthewstevenson8795 indeed mate, and glad you liked the content👍🏼👍🏼

[@johnokane5526]

Nice video mate nice easy install for you aswell can't moan can you 😁👍

[@MJTiffPlumbing]

Great little install and the customer loves it

[@18199]

My god do you repeat yourself

[@MJTiffPlumbing]

DHC