Plumbing Top Out - Waste, Drain, and Vent Ep.88

[@npfloyd]

Phil is hilarious. He has a great sense of humor. Two years ago my wife and I had a house built in PA. Our plumber was a bit rough around the edges but super kind and jolly. His son worked for him off and on. He (the son) took the time to explain the pros and cons of tank/tankless water heaters, recovery time, how quickly the hot water would reach each faucet, etc. Toward the end of the project (it was Christmas time) the son took his own life. My project was one of the last big ones Tom the plumber got to work on with his son. Not sure why I felt compelled to share all that. I think about how he had to finish my project without his son and the fragility of life regardless of ones social stature. These guys usually don't like to be called artists...but they are. I admire any tradesperson that takes the time to fine-tune their craft.

[@skullfoot]

Wow, how tragic. Sorry to hear about this. Plumbing is the best decision I ever made. I can only assume the son had some other issues. But sad to hear about this.

[@GBud999]

Thanks man. I appreciate your comment. It hit too close to home for me.

[@Doomzdayxx]

That's very sad to hear. I hope his soul found peace.

[@jonathancole2562]

People have their opinions about the afterlife and suicide, but in my opinion the lord would never punish someone who wasn't in their right mind!!! I've lost family thru suicide and it's hard as hell but I believe that they found peace!!!

[@michaelsparks8632]

Wow, what a Gut Punch to hear about the plumber losing his son and still having to finish the house without him. God Bless Him.

[@murraystewartj]

Phil is the kind of guy you'd want to be your mentor when going through a plumbing apprenticeship. You'd learn so much just from his stream of consciousness talk - sounds like random thoughts but it's full of hard learned wisdom with a nugget of quantum physics thrown in.

[@MontanaPDX]

I know right, I thought hey I'd switch to plumbing if he was my journey, but I don't want to deal with poop. Haha He's a hoot!

[@felonyknight5905]

@@MontanaPDX my buddy, who is much older than me, master craftsman and been in the trades his whole life, always says about plumbers: "Your piss and shit is their bread and butter!"

[@highcaliberexclusive9890]

Very true. Some plumbers are dicks to their apprentices and don't share shit with them. Almost gatekeeping.

[@murraystewartj]

@@highcaliberexclusive9890 Fun fact is that my son, not even 30, is a journeyman plumber overseeing some large projects, often overseeing apprentices older than him. The stories about him showing them exactly what they have to do and having them f it up or simply not try are amazing. He wants the apprentices to succeed but it's hard when they self sabotage. The work can be hard, but having a work ethic is apparently something you can't teach.

[@highcaliberexclusive9890]

@@murraystewartj I'm 29 and just started getting serious about my life at least I'm a apprentice for a plumbing company on south beach but like I said. A lot of these older Cuban guys who barley speak a lick of English Can be a dick to a American California born young guy. But I'ma keep to trying and hopefully be a master plumber.

[@Jerrodplanck]

The things he says and the comments and stories he has are great. As a fellow tradesman I've worked around all sorts of people and I could definitely work around this guy.

[@johnz1949]

School of hard knocks meets the imperfect world and gets the job done right. No bitching.no excuses.what a concept.

[@juliorosenberg2222]

@@johnz1949 that's right, get the job done correctly NO MATTER WHAT, whatever it takes.

[@kevinmccauley3877]

For sure man, plenty of blow hards in the trades am grateful for pros who have a bit of humbleness!!

[@dadwithautism2792]

Same if you make me laugh 😂 that’s all I need I’ll do most of the work heck it’s not hard todo once you get the hang of it. 🤙🏾

[@shawnallarding9278]

I agree everything Phil says is not only hilarious but, all so true if you are to have a leak it its always in the worst spot! Awesome video gang thanks

[@codygooch510]

I’m a plumber. I’m 27 and self employed. What you are watching him do is the most difficult part about our job for me. I’ve been plumbing since I could crawl and those 3 inch sweeps wye’s combos and all that still blow my mind here and there and take serious thinking to see how I should run it lol. He’s skilled.

[@PLUMBEROO7]

Thank's Cody!

[@johnny_bruhchill]

What kind of work do you do brother? Service or new construction?

[@codygooch510]

@@johnny_bruhchill remodels and service. Maybe 4 new custom homes a year.

[@johnny_bruhchill]

@@codygooch510 right on brother. I’ve done 6-7 years new construction residential 2 years new construction commercial and a little less than a year in service. I’m going back to service where that $$$ is lol that’s badass you been at it so long. I wished I’d known way earlier but hey I’m here. Plumbing legit saved my life.

[@JohnRhodes-lv3rg]

The masters/journeyman all do the drain lines. I’m try to help when I get the chance to learn how.

[@robertbeirne9813]

“Try to have some situational awareness in life”, words to live by !

[@aerialrescuesolutions3277]

Totally true.

[@debnelson8127]

“I try to tell that to my wife when she’s driving.” lol

[@efraingonzalez6842]

What dis mean?

[@Richorob]

“I wish everyone could just get along” 👍🏻❤️

[@rlovato2364]

I hope one day to be as good as he is! I’m a residential plumber, and fix drain plumbing every now and then, I’ll tell you this definitely harder then it looks. Being able to have the vision, I’d rather do potable water instead re-pipes. Started the the plumbing trade @ 30 now 35, my only regret is not starting at a younger age, but in my early 20’s the opportunity never presented itself. I prayed and prayed in my last years of my 20’s at 29 to get the opportunity, and my prayer was answered. Thank you father God. Plumbing has change my life how I feel about myself, I’m achieving a skill, providing for my family, and love what I do!!!

[@Mr.P-trap]

i just started 4 months ago 😅

[@chadmccormick1412]

That’s so awesome! Don’t give up brother! Keep plumbing!

[@nevoyu]

"It says professional on it" "Well that leaves me out" When you hear a tradesmen say that, you got the right one.

[@SentientSeven]

Phil cracks me up every time I see him in a video, seems like a great guy!

[@68Jaguar420G]

I hear that, in jest or not, and I'm looking for another tradesman...

[@TyphoonVstrom]

It's the sort of self depracating humour you tend to see in very good tradesmen. Usually accompanied with statements such as "good enough", "it'll do" etc, when referring to their own excellent work.

[@skizzik121]

@@TyphoonVstrom right. I dont know what the guy above us is on about. A pro shows he is a pro he doesnt say he is a pro

[@a_w_bukhari7579]

68Jaguar420G -- whenever I hear a tradesman/handyman boasting off that’s when I look for someone else. Based on many experiences.

[@monsterq6]

that gentleman is such a great person to be around. smart, humble, wise, hard working, and most importantly... ROARINGLY humorous. Thanks so much for sharing with us the amazing lively energy that plumber has. Blessings.

[@TokyoCraftsman]

When I saw Phil was going to be on this one, I could not click fast enough. Of course, I enjoy every one of Scott's videos, but I just know that Phil is going to be an extra special treat! Cheers from Tokyo! Stu

[@dcrog69]

I'm just impressed how straight his sawzall pipe cuts are.

[@wilbready]

Then, he used the saw all blade to de burr the pipe, clever!

[@dunkdamonk]

I just bought compact band saw mostly for cutting cast iron and uni strut... But boy does it do a fine job cutting pvc especially pressure pipe or solid core.

[@Charliechorizo]

His shirt says NASA rocket scientist. So, not surprised...

[@austinpatrick2682]

You're watching a man that's made many many cuts like that. As with anything, you get better the more you do it. It's an awesome feeling when you've been using a tool long enough it feels like an extension of your hand.

[@ScottPankhurst]

@@austinpatrick2682 yeah, that's not his first time using that tool.

[@Rockhound1943]

What a pleasant human being and a great way to spend 30mins on a Saturday morning.

[@timhale501]

Trading Work. 25 years ago I was rebuilding a house with 4 bathrooms after a fire. My distant cousin showed up with his plumbing truck. gave me a list of what to buy and I was his helper. cutting and deburring all the pipe and getting him the fittings. When I asked how much I was going to owe him he said I had a welder and he needed some fabrication work. I built 2 roll around carts for his jet ski's and then built his stairs on his house he was remodeling, It worked out for both of us.

[@buckbuck9225]

Well isn't that sling blade rustic shit......

[@cweagans]

I really appreciate how Phil takes the time to explain things thoroughly and can do so without being condescending (same to you, Scott!!). In my experience, it's really hard to find that rare person that has thoroughly mastered their trade *and* is articulate and patient enough to explain what they've done, why, and how.

[@omniviking]

Side note: Peanut shells on the floor. Our old local farm and home supply store would have a "Peanut Days" sale for a few weeks every year for customer appreciation. but the real reason they did it was that oils in the shells of the peanut would soak into the concrete floor and the shells were a mild abrasive so every nights when the stocks swept up for 2 weeks they were oiling/sealing and polishing the floor cheaper thatn they could hire a crew to come do the floor for them. And they sold a ton of merchadise cause FREE PEANUTS

[@austinpatrick2682]

Now that's some real ingenuity, thanks for sharing!

[@stroys7061]

Love learning things like that! Thanks

[@johnkrim8377]

omniviking Used to go to a bar like that , eat all the free peanuts on the bar you want , just make sure you throw the shells on the floor .

[@darianzielinsky96]

Lmao that's great 😅

[@eddygoodwin7089]

Thanks for sharing this lesson can be used in all sorts of aspects of life. Screen shot worthy

[@andrewcarr2431]

as someone who hates plumbing almost as much as working on a roof this tradesman's dedication to his art is a joy to watch. his comedic quips are brilliant.

[@marksmith6104]

It’s guys like Phil that built America and we should be thankful for them. I feel lucky to have had a chance to watch him explain and teach his trade to others. Great guy, great plumber. Thanks for the video.

[@bertbergers9171]

Here in the Netherlands we use pvc glue on waste pipes, just like Phil (just that pipe is grey and glue is transparent). Primer is used when glueing up PVC in high pressure systems (up to 8 or 10 bar), like water supplies in barns, gardens or greenhouses, where you don't need copper or PE(X) to maintain drinkwater quality. You also are supposed to not apply the glue in a circular motion and stick the pipe just straight in the fitting, no big turns allowedWhat that does or doesn't do to the glueing up proces to make it withstand pressure better i never understood, but my colleague who thaught me to do so was clear enough about it that i will never forget ;)

[@louismccloskey]

I didn't name these things... I wasn't involved! Lol 😆 🤣

[@crainoperator2897]

Was going to make this comment but you already did!

[@jackdunham8557]

Louis McCloskey : Ya, that was classic... 😂😂

[@analogsmog]

All these years...a sewer balloon. I've been calling it a weenie and its proper name is sewer balloon.

[@davearonow65]

Probably my favorite guest you've had on this series, Scott.

[@aaaaaaaaaa697]

Phil seems like a cool dude. Always nice to have a tradesman on the job site that is professional and willing to be fun.

[@dhh488]

Few things are as satisfying as watching a professional ply his trade.

[@letiziacapra8947]

After watching the video advert i was still skeptical. But when i finally downloaded the plans kzbin.infoUgkxZF0EMnrujZvqHhGkxiz559uIABJWR9TG i was very impressed. The whole plan was just as you said in the video. Thank you very much. I now have a large and valuable collection for my woodworks. This is great!

[@fredrikfriisnielsen6243]

As an electrician myself, I can't wait for the electrical chapter of this project!

[@mikeburgon132]

Likewise!

[@dunkdamonk]

Essenstial craftsman is gonna have one hell of a time making an electricians work look good. 😘

[@fredrikfriisnielsen6243]

@@dunkdamonk as an electrician from across the pond, its interesting to see how you guys do things!

[@KingdaToro]

He's doing an Ethernet network too, which is unfortunately a rarity in new construction these days.

[@pileofstuff]

@@fredrikfriisnielsen6243 It's just as interesting for us to see how your stuff works.

[@ericksalgado8058]

I love this guy. He's like a poet with the plumbing.

[@davidholmes1613]

Loo 8th mi

[@Empireplumbing45]

You know he’s a real plumber when you see him ream the inside and outside of the pipe!

[@andralwow]

Phil really is a treasure. What a great guy. A professional with a great sense of humor. Thanks for the countless hours of education and entertainment you have provided!

[@jej3451]

Dude has like three jokes, and he used them all in this video. The next one won't be nearly as funny.

[@KevinsDisobedience]

We all do the safety squints daily. I’ll admit I was skeptical of him not using the primer as well, but I like this guy. Reminds me of plenty of guys I’ve worked with.

[@greatwhitedon]

I’ve been around plumbers ever since I married into my wife’s family, but none of them ever explained that the vents prevent siphoning of the p traps. Thanks Phil.

[@davidsolis5075]

Haha they're probably handy man

[@michiganporter]

I just really enjoy a pro thats willing to teach! Thats whats important ppl! One of the best things ive herd in a long time is, "Keep up the good work!" Well said sir! You have my respect!

[@jacobrobinson6997]

Listening to Phil talk just keeps a constant smile on my face, his wit is something to be proud of. Reminds me of Alan Alda's Hawkeye Pierce character on M*A*S*H

[@Charliechorizo]

You got a NASA rocket scientist to do the plumbing? Wow!

[@bradcavanagh3092]

Some of those top floor drain junctions looked as complex as the pipework on a rocket motor!

[@xcalibertrekker6693]

@@bradcavanagh3092Nothing special.

[@Charliechorizo]

Suddenly, a new NASA rocket scientist appears...

[@aaronbaraiya3692]

saw the same thing

[@mattgrommesh4125]

I'm a 1st year apprentice just finishing a trade school program and I really like the explanation and tips. Its hard to find this quality of real world experience. The nail was a bonus because finding a solution is just as important as knowing how to put the puzzle together. Thanks a ton!

[@timhale501]

when using a right angle drill it is safer to have your LEFT hand on the trigger. If the drill jerks it will move away from you, and pull your hand off the trigger. I had one hit me on the side of my head. 4 broken face bones, The doctor said he had my eyeball out to see if any bones were poking my eyeball before he put me back together.

[@cuarajhyrojayju4397]

😂😅😂😅😅😅😅😅I’m sorry I can’t help to laugh 😂 my ass off at 3:00 am in the morning reading your comments don’t ask why I found this funny cuz I don’t know the answer 😅

[@RoastBeefSandwich]

@@cuarajhyrojayju4397 psychopath

[@anotheruser9876]

Always a pleasure to see Phil work and talk in a no-nonsense way. I learned a lot today even though it is very unlikely I ever going to build a house or do repairs myself. This channel is gold.

[@williamdegnan4718]

I skip ahead on other channels. (How many rafter tails do you have to watch being cut before you get the idea?) I could watch another few hours of Phil.

[@briancnc]

This guy is great, a rare breed. Love his sense of humor and how humble he is knowing he is clearly very knowledgeable. I think everyone would benefit for working and spending some time with someone like Phil for at least one job in their life. Wastewater plumbing and vent with PVC is an incredibly easy thing to do mechanically, with putting it together, but very complex in laying it out, using the correct fittings (in the proper direction!) and all of the nuances that come with the work, typical of a lot of the trades. I have a great appreciation for the 'puzzle' you described. Like most trades it's all in the experience, setup, and planning, gluing it all together is the easy part, of course if you get it right! Thanks for sharing!

[@paypayfab]

Such a perfect look into the jocular seriousness of a master tradesman. This whole series has been a job well done!

[@tommyv4980]

Hands down the greatest plumber the world has ever known, such a character, awesome guy!

[@wilbready]

We finally got a snippet of the bad staircase getting removed! I thought this happened a long time ago. Can’t wait to see the rework on it, but I’m sure Scott doesn’t feel the same way. Keep up the good (videos) work!

[@johnfox9576]

Yes, me too, what will he now need to sure up cutouts and compromised areas from these pipes.

[@steakwilliams4448]

As a first year apprentice plumber, I love watching this guy work and listening to him talk. Can’t wait to watch him again when he tops out the waters. Is he also gonna trim the house? Can’t wait for that too

[@rasmus9311]

Phil is a legend

[@viracocha03]

"Where it pokes in its male and female and im not sure if were supposed to identify fittings that way anymore but we are" That made me laugh so bloody hard. Amazing comment.

[@JBsnmartnfast]

It's not male or female. It's a goezinta or a goezonta.

[@tomp538]

@@JBsnmartnfast Jethro says goezinta is division. As in 3 goezinta 9, 3 times.

[@cousindave1]

"its male and female and im not sure if were supposed to identify fittings that way anymore". You can bet your life that it'll offend someone these days.

[@percyfaith11]

NEVER, NEVER change that. It's principle.

[@zoravar.k7904]

Could use top or bottom. But that might get confusing in different ways.

[@dcrog69]

I've learned not to use the instant, or very fast set glue, the medium set gives you a little time to adjust.

[@ChrisGilliamOffGrid]

I've never used hot glue for new construction, rarely ever used it at all. I like regular over medium, had too many cans of medium turn to jelly.

[@nathan7627]

@tyvek05 exactly what I was thinking

[@SchMasHed]

Marking before glue-up, The best part of this video, you have literally saved me so much time and material for life... Thank you Phil.

[@royconly631]

Thanks for the video! Your plumber is the most knowledgeable sub I've seen. He is a delight to watch and listen to. Keep on with the videos, I love them! Thanks 👍

[@TheOne-gg7rc]

I’m 63 years old and I’m just getting around to doing some plumbing in my house. Not that I need to but I want to. Change some Things around. All because of these great videos. I was blessed to moved into my house 35 years ago. Mortgage is paid off. And, it needed very little maintenance. However, watching KZbin videos on Pex, the new transversal from copper plumbing to Pex plumbing has taken the plumbing world by storm. I’m watching every video I could find. I’m finding it fascinating. I went out and bought a few tools at Harbor freight’s the other day and I’m ready to start some new plumbing projects. But, this guy here in the video is a genuine wonderful guy and plumber. I didn’t think I would sit through his entire video but I’m glad I did. I learned so much from him. He’s a gem in America’s pocket. I hope he’s rewarded handsomely for all the professional work he had done in the past, present and into the future. Keep up the great work!

[@pierredelecto7069]

Countries with modern plumbing have life expectancy of over 80 years. Countries without it have life expectancy closer to 50. The ability to get rid of our waste eliminates many diseases almost entirely when they are adapted. Plumbers are heroes in this regard. Without them wed have kids dying of dysentery and cholera. It's not just convenience, it saves lives.

[@Isaiah-ft5nx]

Plumbing arguably did more than medicine in this regard/

[@jeffsievert5476]

This man is almost flawless in movement . I hope the younger guys can grasp how much of a library of Plumbing he is . Pleasure to watch . Thank you Men !

[@josephdestaubin7426]

Great video. Just in case anyone is interested, some jurisdictions, perhaps even most jurisdictions, have limitations on the horizontal travel of a vent. Thus, in some jurisdictions, it is nearly impossible to combine all the vent pipes into a single hole. I'm not from Oregon, and I have no idea what the code requirements are there, so results may vary.

[@badwulfstudio]

What a fantastic character...... Getting the job is done is great...... getting it done and having a bit of banter at the same time is absolute gold.

[@austinpatrick2682]

And now we are finally into a trade I know a lot more about on this project.

[@andrewdarbyshire9108]

I’m waiting on the hvac myself.

[@austinpatrick2682]

@@andrewdarbyshire9108 Plumbing, electrical, and all finish work is my area of knowledge. I'll have more to say from here on out. Definitely loving the house build!

[@andrewdarbyshire9108]

Austin Patrick I know them all as well but not as much as I know hvac.

[@leahkelly8306]

I think I could watch and listen to Phil do ANY plumbing job or repair and not be bored. I can tell you right now that is a big compliment because I have watched a lot of videos and I am not a plumber.

[@thomascdurham9130]

One of the most important things said is knowing your local codes. And even though I'm an NYC licensed contractor and building maintenance superintendent, with all of the construction, tradesmen and DIY videos, I never had my to cents because what is code in NYC may not be code in other counties of my state so it sure isn't the same across the nation. I view to see if there are situations that I tackled one way and do a face palm when I see a big time saver. So unless you guys are local, just sit back relax and enjoy.

[@cbell9100]

Phil is a good ol' boy like many old men I've worked with in the past with good dry humor all day. I'd love to spend a week or two working hard with him.

[@steverone7623]

That old Milwaukee saw is the real MVP

[@markallan9050]

Milwaukee hatchet i think its called. That saws definitely pushing 20 years old. Hes probably roughed in a house or two with that one

[@hightechcarpentry]

Plumbing is a type of art, making all of those fittings go together in order while maintaining the slope. You can always tell a good plumber that takes pride in his work: 1) He cares about the framing (and other trades for that matter) taking extra time on his work to not hack away entire studs or joists. 2) The glue work is neat, no excess spewing all over the joints, he cares about where his drips are going, etc. 3) The text line on the pipe is always dead perfect in plane with the next piece. I love this channel and series watching good old fashioned workmanship come together. This kind of pride is getting harder and harder to find.

[@kove]

Wasn't long enough. This felt like a 5 minute video!

[@Stuart68505]

Thanks for all the helpful tips throughout the whole video. Keeping the wide open pipe wrench flush against the pipe to avoid egg shaping the pipe was one very important idea that was new to me.

[@steenfraosterbro3268]

"I didn't name these things. I wasn't involved." This guy cracks me up.

[@drewlancaster3281]

True joy to watch a professional and a craftsman practicing his expertise. Thank you for sharing this!

[@peteratos660]

Where I am at primer is code. The thing about us tradesmen is that in general we all believe that what we learned from our Journeymen may as well be written in the Bible. Plumbers will argue about the best way to install a shower cartridge. Lol it may just be all the glue we sniff over the years. Good video it’s nice to see how guys do things in other areas.

[@williamsmith3132]

You're right it probably is the glue!

[@hannahranga]

Can't blame the glue, I've watched sparkies have similar stupid arguments

[@curtisbme]

It is also required for them to say how many years they have been doing it and that they've never received any call-backs when they are saying how right they are and how stupid the other person is. At least I think that must be legally required on youtube comments...

[@gs5480]

Plumber here in this video is using "hot glue" which is alot more intense than normal solvent cement for upvc and does not require primer. Its normally used for pressurized cpvc.

[@eigencap]

This reminds me of how Engineers "plumb" wires on boards. Gotta see the big picture while understanding the localized quirks that can wreck everything if done up wrong. This is the reality of craftsmanship. Love your videos!

[@tylersmallman]

"I didn't name these things. I wasn't involved." Haha

[@cornpop7805]

Exactly what I needed to see! I'm designing and building a much simpler house, 1 story slab-on-grade, so the plumbing should be less complicated too, but it will be buried in concrete, so I've got to make sure everything is right before the slab goes in. In any case, there aren't very many GOOD residential plumbing videos on KZbin, but this one qualifies because it has a lot of good do's and don'ts in it!

[@Joe-ho6fo]

When we remodeled my house, the plumber wouldn’t work until all the siding was completed. Now I know why.

[@RyanMartin1]

We remodeled/addition a house several years ago. We found that the siding guys 30 years ago had nailed every piece of siding into a vent running up the exterior wall for two stories. The owner commented that it must of been the reason for smelling sewer gas occasionally in the 30 years they owned it.

[@timm439]

Yeah, we wouldn't want pipes to get wet.

[@machone1757]

Enjoy Watching Someone Who Knows His Trade, Can Adjust for Minor Difficulties, and Do a Neat Job. Well Done

[@AnimalFries]

YES YES YES!!! This is the trade I was anticipating the most! I was very impressed with the last plumbing upload! And half an hour?? I'm watching it rn!!!

[@MrForthegame]

Every plumber I’ve ever known has been exactly like Phil.. Phil’s are good guys

[@Vrplumber]

As pertaining to the crookedness of the 3" waste stack, they do make fittings for offsetting small amounts, 22.5 degree bends and 11.25 degree bends, for example. Not to say that bending the stack will create problems in this instance, but fitting solutions do exist for these situations. For instance, using a street 3" 22.5 degree fitting glued into a regular 3" 22.5 can create an offset in the stack of less than one inch. This may not be applicable to residential plumbing as much, but when you are running waste and vent stacks for multi-story hotels or apartment buildings, it is important that the pipe be as plumb as possible to give the maximum amount of room for other mechanical systems, such as HVAC ducts. Also, the closer a stack is to plumb, and the closer a branch is to 90 or 45 degrees coming off of the stack, the easier it is to figure out plumbing layout using mathematical formulas, such as the formula for a 45 degree offset. If you know the center to center measurement of your offset, you can multiply that by 1.414, subtract the offset fitting, and be left with the exact pipe length that needs to be cut.

[@choimdachoim9491]

In ABS those used to be marked as 1/8 or 1/16 bends. Really, really useful fittings.

[@TheDannytre]

Well said! 👏🏽

[@DeTrOiTXX12]

Phil is a great humble guy. Clearly very skilled and experienced with a good sense of humor!

[@jdpalace3472]

"If I let it go, quantum physics will push it back up" Too funny.

[@johnfox9576]

Nasa scientist, expensive plumbers

[@devinmahoney3777]

Bahaha try not to read comments while watching (especially EC because they are such awesome videos and you’ll miss some pro detail if you do!) but I had to look when I heard him say this and yours was the first I saw. 😂

[@joneisenhower1297]

Its true! The bigger pipes, 3-4" or bigger will really push the pipe out when glued. Really have to hold them together while the glue sets

[@septegram]

Yeah, that raised my eyebrows, too. 😆

[@jfbeam]

Dark matter, actually. :-)

[@aderfigueroa]

He knows what’s he’s doing! Let’s not judge him if we don’t live in his Area.. good job 👍

[@SIE44TAR]

26:30 “I’d like to clean that out but I don’t want to put my hands in there before lunch.”

[@christophersiderius7758]

*Hepatitis has entered the chat*

[@gregfeldman6818]

And then, all in, the hands on approach. Phil is Pro.

[@YSLRD]

I had an older plumber clean out a clog in my sewer. He used my garden hose. I asked if I could still use it. He said, " Sure!" then delighted in watching my face as he ran some water out and then drank from the hose.

[@DaddyBear3000]

Love this, a real look at what it’s like. Not a staged and polished version. We don’t need primer in the U.K. either. Good work!

[@JDeWittDIY]

"Scott put a giant beam in here 'cause he was afraid his house was gonna fall down..."

[@puffin7285]

Phil has a great approach to life and work. Such a calming presence, must be a joy to work with.

[@orboflightning]

Plumbers: my people. Here in Michigan the Code requires stud guards and nail plates protecting every penetration where a nail or screw might contact the pipe, and it’s my job (the plumber’s job) to install them. That aspect of the job list differ elsewhere since Phil didn’t have them in before? I also think combination primer/glue is okay for use here, but I’ve never seen anyone use it. We still stick with separate primers and glues. We also wrap duck tape around the pipes where they penetrate through the studs to prevent squeaking. I don’t know how effective or necessary it is, just like Phil said 😂 but I imagine that’s in line with strapping the vertical pipes (we use Ape Tape). Curious what “Top Out” means. We refer to all the work he did as the Rough, or Rough-In Also, did Phil need to use Fire Foam to seal between floor penetrations or is that someone else’s job (or not required in your area)? ✌🏼

[@HoneyGlzedHam]

Where I'm at, sealing penetrations with fire caulking is only required in commercial buildings.

[@Jookyforever]

Pretty much every house job in the United States is following the International Residential Code now. Having fire caulk between floors would only be necessary when the floor is separating different "homes", so for instance if one family lives on the first floor, and a second family lives on the second floor, then you would need to put fire caulking in at the floor lines (in an actual fire-rated penetration assembly, but that's more complicated).

[@psidvicious]

‘Top Out’ is typically a term that refers to the structure. Usually when the highest piece of the structure is permanently installed you would have a ‘Top Out Party’. Traditionally you would attach the branch of a still green tree to that highest point, signifying to everyone that the building is ‘topped out’. All big jobs still do this in some form or another.

[@sirstickjcs]

@@Jookyforever In NC we fire stop at all levels in residential of single family homes. The main floor is sealed at the crawlspace, then at the next floor, then again at the attic. All penetrations between different levels are fire caulked.

[@augustreil]

@@sirstickjcs, Same here in the Northeast, at least what we have done in Ct, they make us fire caulk every hole between anything, horizontal/vertical.

[@elmono3939]

That's how it is done, ladies and gentlemen. Good, old, honest, hands-on work. I can smell the freshly drilled studs and spilled PVC glue. Good job ! Thank you for showing plumbing work the way it is actually done ! PS: Love that disclaimer !

[@williamforsythe5850]

Structural engineers are like, "this large wall needs x studs at x distance to hold the weight." Plumbers and electricians come in and say, "meh just cut out half of this wall and hollow out this area for this 3/4 inch pipe." On a side note the glue actually melts the pvc and then the solvent evaporates and makes the pipe one whole piece.. primer just cleans the pipe.

[@DonovanGoodwin]

Ah the big disconnect. Plumbers think that structural engineers should account for plumbing and walls, but structural engineers think that plumbers should install their piping in thin air.

[@williamforsythe5850]

@@DonovanGoodwin Deligation without communication. Yup prime example also of why the government runs like garbage on a hot summer evening.

[@aus71383]

Hands down my favorite of all the subcontractors on this house

[@badlandskid]

Safety squints... 🤣 I witnessed a lazy plumbing apprentice using a Hole Hawg to bore holes for the above ground rough in. He was laying down on his side boring a hole through the bottom plate. We all had a good laugh when it caught and rapped him a good one. He was the talk of the crew, he was about to write his journeyman test... for the fourth time. Go figure.

[@psidvicious]

One of my co-workers was using a drill like that with a large diameter bit and was really leaning into it with his shoulder, bcz the bit was kinda dull. Predictably, the drill bound up, twisted around and cracked him right across the nose. Broke his nose and gave him a perfect set of dual black-eyes. He was definitely the brunt of many jokes for weeks after that.

[@steakwilliams4448]

psidvicious I don’t typically use a hole hawg, but when I do someone usually hands me a dull bit to go along with it. I guess I’ve been lucky, as a first year apprentice just doing what I’m told (and not really always knowing what I’m doing, or at least the best way to do it)

[@joelongrid7625]

Best plumbing video on KZbin hands down!!! He is one for the ages.

[@7Bloodfire]

I swear Phil is the funniest plumber. "Cuz Scott's afraid his house is gonna fall down." Hahahahaha! I love that guy's random playful snark. When I write, I always try to make my characters have the same little nods and nitpicking sense of humor toward each other. ♥🤣

[@stephanied9331]

I love this guy, honest and real. That comment about not believing exactly what he says till you check your own code, just plain honest.

[@fatcat-hc4pj]

Love this guy does he have his own channel. If not he needs one.

[@tldrftw]

Thanks team, learned more just watching Phil work and chat than a hundred other videos. Cheers!

[@bobbyj0708]

I'm ecstatic to learn that even a professional plumber isn't always certain if he's got his pipe inserted all the way into the fitting every time.

[@daddy1571]

You're supposed to mark the depth with a sharpie to ensure you get a proper joint.

[@rsz90182]

@@daddy1571 Yep I do this all the time to mark them in hard-to-reach spots.

[@jessicapaquelier7334]

Phil you are the best. My favorite episode so far. Binge watching all the episodes this weekend. 😍😍😍😂😂😂

[@KletteTech]

Great video. But, man youtube is putting commercials every 3 min. Almost unwatchable.

[@isisknoblauchmoosburger5922]

get Adblock! ;) (it's free) then you will have no longer commercials.

[@mikeyg28]

I’m watching on my ipad(dedicated YT app) and I didnt’ have 1 ad on the entire vid.

[@jamessouza7065]

1)install firefox as your browser 2)after browser installed open and sign up etc name password etc etc 3) after set up, go to section in browser "add ons) 4)at add ons menu look for (U - block origins) 5) adjust add on settings to your liking 6) enjoy you tube WITHOUT ANY COMMERCIALS... YOUR WELCOME

[@brassmule]

If you're Chrome/Brave/FireFx, get uBlock Origin. If you're on Android, get KZbin Vanced (which works with or without root).

[@ViP-jo1lu]

Thats not youtube, thats the channel itself adding adds for revenue.

[@generalesdeath8180]

I'm gonna miss all the old heads like Phil as they retire, there's so many of them working past their retirement as it is because the trades have been treated in recent years like they aren't good jobs. Good bless people like Phil for teaching us new guys instead of holding on to that knowledge like a gate keeper like some do. Love this series, I think it's the best thing on KZbin. God bless from Florida

[@MrSupro]

Christy’s red hot blue glue is good stuff. Tom Christy and his company show at many of the same trade shows our company shows at and early on he stayed at our house to save money when the Irrigation association trade show was Here in Fresno. I used to hear all about their products as many times we would be in a booth next to them. With the advent of the new medium Body mixed solvent weld glues primer is generally no longer required. All primer was and is, is the solvent less the dissolved PVC or ABS in it and the idea was plumbers would be more liberal in application of it to ensure wetting all the way around the pipe without the sloppy mess of the body as all Of the primer drippings would evaporate leaving behind a wetted active surface and the pigment. The new glues have lots of active solvent in them to melt the PVC thereby not requiring a primer. The addition of the blue pigment makes it easier for the installer to tell when sufficient glue is applied. If you notice he is using Cellular or CPVC pipe not plain PVC. CPVC tends to stay straighter more like ABS which is beneficial in drains where a slope must be maintained. It however has much lower pressure and temperature ratings but in drain this is not much of a problem. It is beginning to be more common where black ABS was nearly always used just a few years ago. Also this is very regional. Some states use more PVC drain than others. Here in California it is still nearly all ABS. Side note on Tom Christy. I believe he invented roll tape pipe wrap as well but don’t quote me on that one.

[@brettphillips3091]

This guy is awesome, his work and his personality, I would love to be backing out a house while he was roughing in.

[@tcpnetworks]

Primer is required in Australia, for all PRESSURE fittings - or anything in the ground.

[@bigvegass]

Ok

[@patrickcowan8701]

What i find interesting is it's cpvc inside transitioning to ABS on the vent, up here in Canada is all abs interior transitioning to cpvc for outside drain lines, great guy I'd work with him any day, a sense of humor makes the day fly by

[@pistool1]

Interesting video. In my country, Finland, the standards and laws define the pipe diameters to be around 20% more than in this project in the US :)

[@Pauken11]

Great video! I’m reminded of when we did a major remodel of our previous house in 2007. I was around to watch all the tradesmen do their work and all the problem-solving they had to do on the fly on the five month job. I always like to watch pros do their work because I’ve learned a lot over the years in doing so, and I’ve never had a single one object to my watching them while staying out of their way, and most will give me helpful tips along the way.

[@michaelvangundy226]

Codes are different all over. Flat venting, horizontal wet venting, and line vents are not allowed in alot of areas. This is a gold mine for how to but check your local codes first.

[@Aepek]

9:49 This is why when walk into a hardware store, building supply store, etc.... you might not find certain materials, & items that you can find in other regions.... The stores “usually” will only stock what’s “common” & “acceptable” in your area (for code, practices, etc...). So, if don’t see something in a building supply store that you see on KZbin or tv, & not sure if it’s code to use in your area, ask the ppl at store; or better yet, can always call local building commission to find out what’s code & not, etc.. Great vid & always enjoy the stories & hearing ya talk. Here’s✌🏼

[@andrewprince3003]

he sounds like a character and a real pro

[@realdeal8078]

I've been in out of plumbing for 3 years working New Construction. Plumbing and finally going to school for it to understand more and hopefully get on with a company after my program.. Phil seems like a great guy.

[@realdeal8078]

@Jacob Monnin I think going to school is better for some people such as myself. Its hard to find a company out there willing to teach.. If you're not keeping up with them at a pace that they want you'll be let go. Kind of hypocrite industry when they need people but they don't want to train. Not everyone gets stuff over night that's why it takes 4-5 years.