COMMERCIAL 3 BASIN RESTAURANT SINK REPLUMB

[@GonzalesMansion]

The clean outs were a great idea. Looks awesome

[@recoverygaming4900]

This is like an everyday job very kool video to show people new to commercial plumbing

[@shovelhead8]

Nice job, Tim. Nice bonus as well. Thank you for letting us watch. Stay safe and stay cool.

[@karlzaker6710]

Hahaha. TIM; by code, you can’t put drain INTO floor drain. Air gap must be maintained to prevent contamination from flooding drain

[@seanmalone7920]

100% right this isn't done correctly

[@TheHuntermarks]

You are one precise PVC measuring fool to line up all 3 and get em all to go in like that! 😂😂

[@jpvoodoo5522]

Yes, how do you figure out the length of each pipe and fixture? Can you recommend a tutorial on that part?

[@yepdodamath]

1:35 I was starting to feel for that guy's eyes. Always wear eye gear!

[@cylentsmoker]

Dude awesome. Just got into the same kind of work recently and i enjoy the shit out of it. Your videos are helpful man thank you

[@seannappi]

Hey, out here in Cali 😀 we have to air gap indirect drains, do you not have same rules? Thanks for the great videos keep up the hard work!

[@graysonsheridan1593]

That center downpipe drops right into an open Drain. It is just covered to keep stuff from getting in there.

[@dbenterprise3oh2]

Yes but it should still be air gapped. Just did a Starbucks in Delaware. Air gap is code.

[@paigewagner4857]

100% Indirect waste always has to have a 1" air gap no matter where your at

[@gabeking2996]

You are right it has to have a 2" air gap it's international plumbing cod so it's like that everywhere kinda seems more like a handyman and not a plumber !

[@SunnyKumar-hj4iy]

Thanks TIM...awesome vudeo.Great work.So helpful.God bless you man

[@tomdale1313]

three compartment sink...good job

[@elektroman3187]

5:03 Great job! Only question is how did the dishwasher pull out the grills and filters out of the drain after you placed it so far down into the pit? Did you have to go back and cut it out to let the drains out or are they split grills? Those guys have to pull out the grills and drain filters to clean them at least every few days. Did they just figure they should clean it while it's hanging off the drain pipes? Regardless of my questioning, your work is at least 10 times better than the set up we have at my jobsite...

[@SandwichesRule]

Tim, I want purchase the new drains for my shop, I see there are 3”& 3.5”, how would I know what to purchase? Is there a measurement that I can take on my existing think? Thank you.

[@DonnieMeyer-y9i]

i would be worried about the gaskets that are pushed out. should have tightened from the top with special tool

[@plumbbuild6517]

I hear you dude great job and I hope you enjoyed that Jersey Mike's sub and thanks for your videos have a good weekend Tim

[@angelloco72]

Nice work 👏

[@matthewpowell4845]

Tim they make a t and a insert / key for those drains. But you seem old school and use channelocks lol

[@curt8120]

In any state I Work the code changed you cannot connect the drains together if you have one of the sinks being a clean sink, its a cross connection that is illegal in any restaurant. and the air gap is 2-1/2 times the diameter of the discharge pipe.

[@madcowusa4277]

Just a novice interested in plumbing, I thought code doesn't allow sanitary tees on their back like the two outermost sinks? I'm guessing the sinks themselves act as a vent and the pipe into the drain grate is air gapped. Anyway, saw a triple sink setup today with one additional sink draining in from each side of it (5 sinks total) - all done with sanitees like this so I guess this the norm. And all 5 sinks were plumbed in 1.5" ABS which can't possibly be big enough.

[@michelejann5732]

So the 1.5" ABS isn't enough what would be

[@elnicadrums]

Nice 👍👍👍👋💪 good job you guys kicked butt 👍👍

[@jpardo100855]

I'm curious as to whether you used the correct cement for the transition from pvc to abs?

[@rojohe]

That double sanitary tee fitting is not ABS, it's PVC Schedule 80 (which is also available in PVC Schedule 40.)

[@humbleone4227]

Nice job Whats the average on a job like that thank you

[@theartofplumbing]

Nice job Tim

[@scopeside]

Hey boss can you help me with something. Is there any codes for these or where you need 3 individual drains 1 per bay and are you allowed to put sani’s on their back ?

[@wittelarry1]

It's always fun cutting those out

[@michelejann5732]

For your safety safety glasses a must ❤❤

[@seanmalone7920]

It's supposed to be indirect waste which mean ur discharge line should have an air gap at the top plate not Recessed inside the Floor Drain

[@antonioantonio7540]

Did you use a smaller pvc to fit in the drain pipe?

[@georgebunky]

Guys saying it “doesn’t pass code” but they don’t quote the code. These are the guys who trap drains before dumping into an indirect waste (like a floor sink or hub drain) which…. Oh yeah, is also trapped!

[@bartman22x1]

We need to do a 3 basin corner sink

[@gyver471]

Can I reduce it down to 1 1/2 instead of 2”?

[@lulubliz6405]

No grease trap??

[@thomasrawlings2715]

If the threads were no good in top of drain, why was it still holding. Forget your key

[@steventaing1544]

That is not code it has to drain individually and have to be 1 inch above the in ground drain to avoid cross contamination.

[@vishyandypurandat6208]

Rookie here asking a question. Does it need a vent or is it so close to an entry or drain it doesn't?

[@recoverygaming4900]

It has an air gap so no vent needed

[@__comic]

How much did you charge for that job in about to do the same

[@PLUMBINGWITHTIM]

I think it was between $450 and $500

[@Erickhardaway]

What inch pipe did you use on the drain?

[@PLUMBINGWITHTIM]

2”

[@knurri]

If the bottom of the sink is any indication of the cleaning protocol in this restaurant, it should be in violation and condemned.

[@grubbygringo]

No air gap? That's a big no no.

[@thomasrawlings2715]

Air gap is in floor drain under grate

[@kingokafor6215]

I believe in ohio that requires a 4inch air gap

[@fredpastuh7518]

Tee ABS? Why?

[@PLUMBINGWITHTIM]

Only one I could find in our warehouse 😂

[@fredpastuh7518]

@@PLUMBINGWITHTIM need use trans glue?)

[@evanschrisjr]

This does not pass code

[@lulubliz6405]

No grease trap??