PMA 5: Pensky-Martens flash point testing | Anton Paar

[@mohamedelmehdimekhzoum5045]

I already use PMA 5 to determine the flash point of my product, Thank you very much for your detailed explanation

[@antonpaar]

You are welcome!

[@edgarguerrero6698]

thanks Tony 😃😃😃😃😃👍👍👍👍

[@duaneduvall7901]

Good information, thank you.

[@vinayekumargopaul1722]

Hi, thanks for the video. Can i use the tester to test the flashpoint of Charcoal sample ?

[@antonpaar]

Hi and thanks for your question! Unfortunately, you couldn't measure charcoal samples according to ASTM / ISO with PMA, but the instrument could be set up in a way that would allow for quick QC measurements.

[@rajkumarruhil1995]

Very nice

[@antonpaar]

Thank you!

[@Midnightspecia1]

Used a manual PMCC for years. Made in 1944 semi-dangerous. The thing with this unit, the glass thermometer is very delicate. There is a small clip on it and it may end up in your sample. More viscous materials, like asphalt does cause this unit trouble. You will have to warm the sample to roughly 100c. The rubber sleeve that turns the propeller will slip and not turn if the sample is cold.

[@antonpaar]

Thank you for your valueable comment. Asphalt or bitumen samples are solid at ambient temperature and must be heated up before measurement of the flashpoint. The PMA 5 comes with a special bitumen test program where the heating block of the PMA 5 can be set to a certain temperature to keep the filling sample temperature before the stirring and measurement of the flashpoint starts. After the completion of the test the PMA 5 will cool down the heating block to the temperature which was set before in the bitumen program to avoid that the sample becomes solid.

[@chavidivenkataprasad6461]

Regular issues with Pt100 and and Igniter

[@khaleejkha4026]

Thanks do u give any training with your equipment.

[@antonpaar]

Hello! Please find more information about our seminars here: www.anton-paar.com/corp-en/services-support/seminars/ and about our webinars here: www.anton-paar.com/corp-en/services-support/webinars/. You can also filter according to your preferred country. Best regards, Linda Hintsteiner Social Media/Anton Paar

[@aliosama1477]

Thanks. Stop overflow relative problem how can i fix it ?

[@antonpaar]

Hi! Sorry to hear about your troubles with the instrument. Please reach out to our service technicians through our contact form: www.anton-paar.com/corp-en/contact/

[@manojkumarsharma6177]

How many price of the appratous in Indian Rs

[@antonpaar]

Hi and thanks for your question! This model has been replaced by our PMA 500. If you like, I can put you in touch with one of our sales reps!