Many thanks for making these tutorials, otherwise a noob like me would never be able to fly such a complicated machine (albeit a simulation of it) anywhere near an acceptable level. Although I am still very much in the learning phase.
@PatrickBijvoet2 жыл бұрын
I was wondering how to fly a hold. I completely overlooked the hold button. It is quite easy. Thank you again!
@PatrickBijvoet2 жыл бұрын
I just did my first holding with succes! Thanks again!
@beescan222 жыл бұрын
Terrific informative tutorial! Makes holding too easy! I'm sure I should stand on my head and use my left hand thumb and forefinger to get proper entry ( or something like that from the old days). Very well done, concise and complete, thanks for your time and effort in producing this tutorial for us.
@benjaminmathon74172 жыл бұрын
Thanks for the video! Could you please make one about the HUD : setup, different modes, approaches, etc...
@A330Driver2 жыл бұрын
Considered, but I have to find a pilot who actually uses the real hud first. My airline doesn’t have them.
@XCougar85X2 жыл бұрын
Thank you for a nice tutorial once again. Holding aparently is a lot less complicated then what i expected :D.
@A330Driver2 жыл бұрын
Glad it helped!
@marshie13372 жыл бұрын
there's so much to learn, it can be quite overwhelming just sim flying. couldnt even imagine the real mccoy
@MoisesSimana2 жыл бұрын
Your videos keep getting better. Thank You!
@hvoers1221 күн бұрын
Very helpfull this tutorial. Thanks. 😊
@flying_pilot Жыл бұрын
Very good and simply explained! 👍
@jmcmillen192 жыл бұрын
I think a good follow up might be general fuel planning ie what is contingency fuel ifr reserve I also think a discussion on when to have an alternate when it comes to planning might be great as well. But got to say love love your videos a lot has been a great refresher for someone who has been out of flight sim for a few years (granted I have my associates in airline dispatch so a lot is like okay so this is how they use that in the cockpit)
@stevek.9424 Жыл бұрын
Great vid as always. Assuming right turns are default, how do you enter left turns? Assume you'd enter "xxx/L TURN" in the scratchpad?
@A330Driver Жыл бұрын
Simply /L will do
@ro130 Жыл бұрын
Can you make a video of this situation?: you have your fplan configured, you are approaching to the landing airport and you realize you can’t land there, and you hace to change te airport, how you should proceed, in terms of, how to comunicate with the atc asking another airport for landing, configuring your radios and your mcdu to change your flight plan in mid of a flight. Thanks!!!!
@A330Driver Жыл бұрын
Hi, I did a diversion tutorial, the scenario you describe fits pretty well in there. As for ATC, there's no standard phraseology defined for how to announce a diversion, so use plain language. Basically, just tell 'em something the likes of "scrambled egg 123, diverting to xxxx airport". They'll most likely give you radar vectors until they sorted a route out. For anything airplane related check my diversion tutorial.
@typhoonul9852 жыл бұрын
nice tutorial manuel
@transair272 жыл бұрын
Hi...Very good video - as always...A quick question please. How much prior notice do you have to give the FMS before selecting 'exit' hold, to avoid another full hold? i.e. if you exit the hold inbound to the fix, will it assume you will leave the fix straight away, or if you exit AT the fix, will it take you round again? thanks
@A330Driver2 жыл бұрын
Basically anything prior to the fix should work.
@transair272 жыл бұрын
@@A330Driver ok thanks for that
@gokmen9928 Жыл бұрын
Thanks for the video. Any idea why A/P overshoots both at entry and turning inbound to NDB? It seems it is not starting to turn outbound for this direct entry before exactly reaching to NDB. Also after starting outbound, distance between inbound and outbound leg gets tighter and it overshoots once more turning into NDB. Is that PMDG issue or B737 also does that in real life? If so why? Is't it necessary to be that much precise during holding?
@jincyayrattu6606Ай бұрын
TNX CAPT❤
@PeterPan-jd9lu2 жыл бұрын
very nice. thank you!
@floer_88262 жыл бұрын
Thank you, very helpful :D
@DinkyDoos2 жыл бұрын
For me, real flights into or out of challenging airports
@benw54702 жыл бұрын
I am wondering if there is a way to figure takeoff and landing distance required for specific weights. I am using the online performance tool you suggested for v speeds. But I have no idea if I can get off the ground on a 4,000 ft runway. Your videos are fantastic! Thank you!
@A330Driver2 жыл бұрын
If you can’t get off the ground the performance tool will tell you. As long as it gives you data you are covered and can commence the takeoff.
@benw54702 жыл бұрын
@@A330Driver Thanks!
@pauldevaney77138 ай бұрын
Hello , so I.m flying the IRMN2 arr to LAX, The star at GRIPR int has flight level GRIPR b230, a 190. then theres a 10nm slash , so whats my altitude speed and 1 min intervals or 10nm
@omriginzburg45972 жыл бұрын
Hi Emanuel, I have noticed that the altitude has dropped by 400ft before entering the hold. Is this normal? Thanks!
@A330Driver2 жыл бұрын
It’s a bug in the 737
@ins13372 жыл бұрын
thank you
@virtuellerberufspilot66872 жыл бұрын
Hallo Emanuel! I have with the new B 737 the problem, that the Autothrust sometimes, not always, switches off during the start procedure. Is this a bug ? Greetings Wolfgang
@stefandeez21342 жыл бұрын
Same problem
@virtuellerberufspilot66872 жыл бұрын
@@stefandeez2134 Hallo Stefan, ja das ist ziemlich nervig und im realen Fliegen auch saugefährlich. Es kommt dazu, dass ich den Autothrust auch dann nachträglich nicht mehr einschalten kann. Gruß Wolfgang
@A330Driver2 жыл бұрын
Please post this in PMDGs support forum
@yellowtail_29 Жыл бұрын
This is Microsoft Flight Simulator ???
@Buschwick2 жыл бұрын
Your actual path along that holding pattern bothered me. Is there a proper way to make those turns possible? Edit: Why cant eh FMS figure out that track size immediately?
@A330Driver2 жыл бұрын
LNAV and line drawing needs some updates in the PMDG. Those are in the works as far as I’m aware.
@speedbird61222 жыл бұрын
Hi thanks again for this tutorial I was just wondering if I can use Vnav in the hold (does the vnav recalculate the path with the hold ?) or is it not a good idea ? For instance if for some reasons I m to high on an approach and the atc is giving to me a hold to loose some altitude
@A330Driver2 жыл бұрын
You could, but in your specific scenario I’d probably use level change.
@andershogqvist2 жыл бұрын
@737NG Driver, how come it doesn't command a holding pattern that it actually can fly? The turns are obviously too tight leading to a holding pattern looking like blob rather than a nice race track, is that a sim thing?
@A330Driver2 жыл бұрын
LNAV is bugged in the 737 at the moment. The real fmc also has to redraw the pattern from time to time though. But not as bad as in the PMDG.
@ImagenNoReligion2 жыл бұрын
Is it normal for the airplane to not be able to stay on the hold track exactly? Does that matter IRL?
@A330Driver2 жыл бұрын
LNAV is bugged in the 737 at the moment. The real fmc also has to redraw the pattern from time to time though. But not as bad as in the PMDG.
@Neo-je4bi2 жыл бұрын
Why does the holding pattern adjust its size?
@A330Driver2 жыл бұрын
In real life: The airplane adjusts it live based on speed. In the sim: Bug