PMM Armory Tutorial Comp Install (Full install)

[@realkarma1254]

Just installed mine on my p229. It’s easy and look great! I order extra shims just in case i ever have to re shim it. Took me 5 min to do. I practice putting in vise and put it in the best position I could wrench it down on it and torqued it on fluid motion perfectly.

[@hillcosparky1050]

Just installed mine on my 19.5 with a Zev barrel. A little worried at first with how many shims I needed, but man this thing looks slick! Can’t wait to get some rounds through it tomorrow!

[@leehranicka3689]

Installed one of yours on a FN 509 Tactical, 1, 2, 3! Love it!

[@lifeonabike8691]

Awesome video, just got it on my 509c Tactical. 20 minutes and all finished. Thanks!

[@rodneybonds8466]

Easy peasy just installed mine on my PPQ M2 Q4 TAC will use DPM spring and adjust from there quality Comp.🎉

[@Boris-kw8wb]

Glock 19 wth SilencerCO barrel. Used included shims: Two .010s, one .005, and one .002 making up a total of .027 as the comp needed to rotate 270 degrees for a snug fit

[@TheWinterHaze]

Im Glad they updated this install process, I followed their old process to a T a few years ago, and it totally seized the comp to my barrel at a 10° cant, and destroyed the comp trying to get it back off, because they recommended you put the loctite on first. Ever since then I've never bought one again and ofc didnt get a refund, but glad they're updating their install video. Sadly I was a newbie to gunsmithing and didnt know any better at the time

[@realkarma1254]

What you let it dry first?

[@jopsball-turret6969]

Thanks for the video. Will this be ok with a Killer Innovations barrel for my g45?

[@Zakralidge]

I know this might be a dumb question, but on e on to clean the gun u just wont be able to seperate barrel and slide right or do u break off comp each time?

[@tajjacobi6416]

Correct, it is a semi-permanent installation. It is still very possible to get a thorough cleaning of the slide and barrel while it is attached and does not require uninstalling to clean!

[@Kevinas1124]

So if you have a threaded barrel you still need to use vice grips?

[@carpediem956]

For the Beretta 92 do I need to buy an extended spring rod or will it work with the factory spring rod?

[@thenickhood1592]

What about the part where you have like a milimeter to go but nothing will move it ? Comp is now stuck on and 98% of the way their but no dice. I'm so livid. No idea what the issue is but now I can't even get the comp off.

[@ParkerMountainMachineNH]

Email CS and our gunsmith will assist

[@thenickhood1592]

@@ParkerMountainMachineNH got it figured out. Thank you though

[@hc9987]

I just got a Walther PDP Pro X with the PMM compensator. I was actually breaking it down to clean it for the first time and realized I can't get the barrel out because the compensator is on there. So do you have to remove the compensator if you want to clean the barrel? I had assumed you would need to take the compensator off for cleaning, since you can't get the barrel out of the gun unless you do so. And then this would mean you would have to remove it to clean the barrel, and then go through this ridiculous process to put it back on every time? Someone please tell me I'm missing something here, otherwise I would have never bought this firearm!!!

[@ParkerMountainMachineNH]

We do not suggest removing the comp for cleaning. We have builds here with upwards of 50,000 plus rounds on them and we never remove the comp for cleaning. We recommend you take down the slide, remove the recoil spring, and let the barrel and comp float freely in the slide. Clean the underside of the slide as normal, and then clean the barrel and comp exterior. Run a patch or bore snake through the barrel and comp much like you would with a rifle. Put a few drops of gun cleaner in the port of the comp and use a brush to scrub out the carbon build up we suggest doing this frequently if you are a high round count user. Once fully cleaned, lube the entire barrel with a high-quality lube like GunButter and put a drop or two in the port of the comp, this will help for future cleanings as well.

[@hc9987]

Great, thanks for responding and for the advice!​@@ParkerMountainMachineNH

[@50calammo84]

Hold on ur telling me i ABSOLUTELY NEED that vice???? Or can i just muscle it out

[@LuiDineroo]

My comp has a small gap from the slide and it annoys me

[@Ladiesman3173]

So you need to buy the plastic mounting block??

[@zacharycarter9341]

It helps. A lot

[@tajjacobi6416]

Not required but highly recommended

[@jnicemiz]

You can put it in the vise with another method for protection. Leather, rags, your own 3d printed shims, other plastic shims, etc. Just something so the vise doesn't mar the comp. Obviously the block is going to be the easiest and most secure method.

[@ph8ton]

my comp threads on to the exact same position no matter how many shims i use or dont use. i dont know what to do. anyone have similar issues?

[@ParkerMountainMachineNH]

@@ph8ton e-mail [e-mail]

[@ph8ton]

@@ParkerMountainMachineNH will do thank you.

[@Redd618]

Anyone installed it without a Vise?

[@Piklikr]

Dud you really just put red locktite on that??

[@ParkerMountainMachineNH]

@@Piklikr yes. Red 272

[@nathanbrown6091]

Please move you mic farther away I hear everytime you swallow and breath 😂

[@notsocertified4898]

Yeah, makes the video very uncomfortable to listen to

[@williamthompson945]

Lol

[@m.f.m.67]

Looks like a real good way to mar up your slide and your barrel. I'll pass.

[@xxPhoenixX-sg9tr]

What a pain in the ass. Just buy a damn suppressor. Way easier 🤣🤦‍♂️

[@Lilrandy69]

Suppressors don’t do what comp do goofy 🤡

[@s00-x2h]

@@Lilrandy69 tbf with all that weight out front they kind of do

[@Robertrtg-vc3px]

The excessive swallowing is very annoying lmao

[@thereddrob]

wondering if this comment would be here, it was very loud and distracting

[@agnisamansfield4038]

Robinson Christopher Moore Anthony Martin Deborah

[@christopherbaten5459]

This is why Radian is dominating the comp market. No shims or timing issues. The whole time I was watching this video, I was thinking; “there has to be a better way”. Not to mention, I can actually take the Radian off for cleaning. 🤦‍♂️

[@yockhunter]

They also only make comps for two guns!

[@susguy3791]

This comment is irrelevant for this video since it’s only available for p365 and Glock it’s not dominating the market this video was made for 😂

[@christopherbaten5459]

@@yockhuntertechnically they make comps for six guns but for only two different companies. I see your point. However, the Radian comp is legal in all fifty states because they don’t require a threaded barrel.

[@hc9987]

I just got a Walther PDP Pro X with the PMM compensator. I was actually breaking it down to clean it for the first time and realized I can't get the barrel out because the compensator is on there. So do you have to remove the compensator if you want to clean the barrel? I had assumed you would need to take the compensator off for cleaning, since you can't get the barrel out of the gun unless you do so. And then this would mean you would have to remove it to clean the barrel, and then go through this ridiculous process to put it back on every time? Someone please tell me I'm missing something here, otherwise I would have never bought this firearm!!!

[@christopherbaten5459]

@@hc9987 unfortunately, you are absolutely correct. This is what most people seem to not understand about this firearm. Which is why I said it was disappointing. The truth is most people never clean their firearms. So congratulations on doing that much. Please relay your experience on more reviews of this firearm. We need to encourage Walther to do better.

[@Kevinas1124]

So if you have a threaded barrel you still need to use vice grips?