Rear foam widebody overfenders!

[@RygarTheDestroyer212]

The rear fenders look amazing!! This thing is going to look so sick when it is all finished!!

[@BuildCreate]

RygarTheDestroyer thanks man! Really appreciate it.

[@ronanmaison6361]

I guess Im asking randomly but does any of you know of a tool to get back into an instagram account?? I was dumb forgot my account password. I love any tricks you can offer me.

[@anakinmorgan2456]

@Ronan Maison instablaster =)

[@ronanmaison6361]

@Anakin Morgan thanks so much for your reply. I found the site on google and Im in the hacking process now. Seems to take quite some time so I will get back to you later with my results.

[@ronanmaison6361]

@Anakin Morgan it worked and I actually got access to my account again. I am so happy! Thank you so much you saved my ass !

[@uppitywhiteman6797]

Your choice of music is good and the balance between talk and demonstrating is pleasant to watch.

[@bmcshane80]

Absolutely brilliant! Love seeing how just the change in material has opened everything up for you. When somethings easy enough to work with, the creativity follows! Use the Difuser off the SVX (if you still have it) on this, would look KILLER!

[@TheZooness]

Awesome. Can't wait to see the completed side

[@BuildCreate]

TheZooness me too 😂

[@01FozzyS]

You got that rear spot-on,Chris! Love it!

[@BuildCreate]

01FozzyS thank you so much dude! I was worried that a full length fender would be too much, but I love it.

[@kevinmccahill1431]

Came across one of your video’s by chance but watched the lot over the weekend. Quality work man, keep it up and look forward to the next update 👍

[@BuildCreate]

Kevin McCahill thanks man, appreciate it. New video will be up next week!

[@JShel14]

I'm excited to see the finished product.

[@jessealbright8593]

I was looking up diy wide body kits and man you just made my day man thank you

[@BuildCreate]

Glad it’s gonna help dude. Happy building!

[@KyushaStyleTuning]

Yep. Looks awesome! Excellent work. Looking forward to the next stage already. 🤘😎👍🔰

[@BuildCreate]

Kyusha Style Tuning thanks Matt! Going to foam up the other side and then hit the whole thing with glass over the Xmas hols.

[@jrmyadventr]

You make this look way easier than it seemed at first. Gives me some hope for making my own

[@BuildCreate]

In all honesty it is fairly easy. Just take your time, that’s the key.

[@jrmyadventr]

@@BuildCreate definitely gonna give it a shot 🙂👍

[@supadeluxe]

Wasn't sure until you put the top section on... then BAM! Nailed it!

[@BuildCreate]

Dale Nimmo glad I didn’t disappoint haha.

[@williamkirk6968]

This looks like my 323 station wagon but in a Ute form I really like the fenders you’ve made they lookin sickkk

[@The2fiddyridah]

I think it's a Subaru Brumby aka BRAT I used to see 1 when I was around 7 in a shed with fog lights on 4X4 style bars. Parents XE 351C was a REAL ute to me tho.

[@Nakyd]

Dude!! This looks like such a fun project! And you seem to be enjoying every second, which inspired me to do the same to my e39 bimmer! Thanks for the great content

[@Nakyd]

*Also, Did you end up disconnecting your cars battery to avoid an airbag sensor from triggering the airbags to go off when drilling?

[@jayinmi3706]

Definitely the coolest looking Brat I've ever seen. I might add a body line in front of the rear wheel so it matches the bottom of the front fender behind the front wheel? But I'm loving it so far! Great work.

[@BuildCreate]

JayinMI thanks man! Yeah that’s definitely an option!

[@TodayGarage]

Just found your channel. I'm three videos in and super stoked to see how this turns out. Love the content man, keep up the great work!

[@BuildCreate]

Thanks dude! Appreciate the support.

[@retrophil8241]

This has been a brilliant series for people interested in styling. I've always been more of a exterior styling man than big BHP. On KZbin it's difficult to find anyone doing this sort of thing and doing it well... With the discovery of the foam, what about a revisit to the Duck tail spoiler for the SVX? I've a unusual Saloon car myself and I'd like to see an example of making a duck tail using that foam. Your Duck tail video was how I originally discovered your channel.

[@RicBaraniak]

Really cool to see someone doin up a Brat! You're music is really cool too.

[@SKATERDG618]

This is killer man! Can't wait to see it finished!

[@BuildCreate]

Thank you dude!

[@nismofreak33]

Super excited to see you finish this project. Its going to be fucken wild!

[@ADHDCUSTOMS]

This bloody amazing and I will be using this same method and posting videos on my channel. Will be doing this on a vw polo breadvan. Thanks so much for the info and what products to use.

[@BuildCreate]

My pleasure dude. Enjoy building!

[@mertekiz82]

well done bro you gave me a really super fine idea ! thanks for doin this !

[@eurokevin]

your killing it its coming out great definitely trying this next time I build a kit looks like saves a lot of time

[@BuildCreate]

Euro Kevin oh dude, you’ll love this stuff. Stoked you like it.

[@deepestdub]

Superb work as always. This is going to look absolutely awesome

[@BuildCreate]

John Bradley much appreciated dude 🤙🏻

[@thats10guy91]

Hey since your going to have to do this all again on other side I have a suggestion. Maybe use dissection pins or straight pins to hold your foam panels together as you glue them. You always need three hands to do that stuff. Looks great .

[@BuildCreate]

Steven Kennedy that’s a good shout dude! I’ll definitely give that a shot!

[@Detakz]

Looks great planning on going widebody on my del sol I recently picked up a rocket bunny spoiler or maybe a replica I want to try to replicate it so I can make more for other people since alot of del sol owners want them

[@stasKZ]

love watching your work. please do more uploads like this, and more often.!!

[@concreteboard5098]

Reminds me of the r32 pandem kit. Looks amazing man!

[@BuildCreate]

Thanks dude!

[@mv4463]

I'm doing a American GMC vandura full size high-top conversion van trailer to match my savana hightop conversion van .. your videos on your pickup truck have given me so many better ideas of how to do it and save time .. its looking crazy great.. world events has me on hold. But I'm getting supplies ready for when I can start..is the foil tape from heating duct applications???

[@chrisangellago]

That's looking fire when its done!

[@BuildCreate]

Thanks man!

[@802Garage]

Oh sweet Jesus. Big Keg recommended you channel and I am not disappoint! Massive classic Subaru Fan. I'm subbed. Awesome work. :)

[@davidcatley4948]

BADASS DUDE!!!!! Absolutely love this channel 🤙🏻

[@BuildCreate]

David Catley that’s super kind of you to say so dude. Thank you for the support!

[@habakanaba]

Its gonna look good when it's all done! Cant wait to see it!!

[@BuildCreate]

Gavin Kerchhoff thanks dude! It’s going to take a while, but should be worth it and should break some necks haha.

[@leonardomendez4922]

well done brother, inspiring. motivated to work on my 4th gen camaro.

[@gotsn0w]

This foam is a game changer :0 can’t wait to see it finished!

[@BuildCreate]

Sure is dude, crazy easy to work with!

[@gotsn0w]

@@BuildCreate I'll have to try it when I move to a bigger garage next year :D

[@MrFordktm]

What foam is this ?

[@Biharis_89]

Make a hot wire foam cutter. Super easy diy to make your foam work easier. It’s a crafting trick. Keep up the great content. Cheers!!!

[@BuildCreate]

Ron Fraser I’ve seen that!! That’s a good shout dude. Stoked you like the channel!

[@JoseBAdams]

Piece of art

[@band.t2453]

You know what....thank you so much for putting the link on where to buy the foam you're using thank you,I subbed.

[@BuildCreate]

My pleasure dude!

[@TylerRogersUSA]

Youre killing the build man, looks great!

[@BuildCreate]

Tyler Rogers thanks so much dude. Glad you like it!

[@TylerRogersUSA]

@@BuildCreate did we ever get a svx walk-around? Loved that build too

[@johnpaice8481]

Hi another great video , what glue sticks are u using please , can u included more detail when u get to the fiberglass stage , ie materials etc and suppliers car looks amazing 😊

[@T0tenkampf]

Very Gruppe B looking, love it! Now just needs Gulf livery.

[@ScaredShiftless91]

Really nice work, I love it!!

[@rollingsloth481]

What car is it? The kit looks amazing, really think you did an amazing job

[@mrt9781]

This is inspiring me for my transit van ! 😎👍

[@dannysanchez1020]

looks very cool! Good Job!

[@matthewcrossland2617]

Great job, what foam and suppliers do you use?

[@sampoulsen]

I love that you did it like this and not the messy expanding foam i've seen everyone else do. This seems so much more simple and much less messy. So Foam, hot glue gun and you're set?

[@maze2756]

Wow that looks great

[@cloudgarvin8843]

I'm going to use the same idea to widebody my ae95 corolla all-trac

[@6387mbrown]

Really looking forward to the next video when you start glassing the foam. I've just bought some foam sheet and some GRP filler primer to coat it with. But by the sounds of it, there will be a lot of sanding so interested to see if your technique is easier! Good luck, have a great Christmas and get out in the garage!!!

[@BuildCreate]

Let me know how it turns out dude. Don't worry, i'll be in the garage for sure!

[@ikhan5]

Just came across your channel and this is just awesome! One suggestion if I may? Love the rear but I think the section after the wheel arch needs to be kicked out at the bottom too (following the same curvature from before the wheel arch).

[@thenamestevewastaken]

The seam of where the two bits meet is in line with the swage but not the actual corner, when it’s glassed will it not look odd?

[@BuildCreate]

Stephen Lovell that’s going to be amended with filler once the glass is down and cured. It’ll only be a small amount to get it right.

[@scottmarchington6690]

I'm so in the mood to wide body my golf mk7 gtd in the new year

[@BuildCreate]

Scott Marchington do it!!!!!

[@RumbleGarage]

Fantastic job!

[@BuildCreate]

Rumble Garage cheers dude!

[@ahmedrehman4152]

Really inspiring dude. Keep it coming

[@BuildCreate]

Ahmed Rehman thanks man! Much appreciated.

[@TheNorthernmunky]

Brilliant mate

[@octanetvchannel]

Amazing work!

[@BuildCreate]

Appreciate that dude!

[@Rossithailand]

I like you channel! Have you ever tried using front wing off another car I used to do this for auto cross , by putting another car wing over and fill with foam it’s very accurate but I liked boxy end .

[@Rossithailand]

So I would use 4 wings and reverse for rear off car

[@ryandyer5081]

I need this kit when it’s done 👌🏼

[@jasonmapotts]

So freaking exciting man looks mad

[@BuildCreate]

jasonmapotts looks fucking batshit irl haha.

[@Lost10mm.]

How did find those wheels for those suubs looks good. So many are really rusted out. Work looks awesome🍻

[@BuildCreate]

I’ve converted to hubs to 6x139. Super easy to do and opens up a world of wheel options.

[@shanewright6958]

Looking good. Another great video 👍👍

[@bartjanc]

Looks awesome. But since you’re trying different looks, wouldn’t it be easier to first try it on a scaled model of the car?

[@bazrat69]

Looks so good dude

[@BuildCreate]

Chelt scene Uk thanks homie!

[@bleedbloodred]

looks great man

[@ariel300zx]

EXCELENTE JOB. WHERE DID YOU GOT THE FOAM PANELS?? PLEASE!!!

[@BuildCreate]

The link is in the description dude :)

[@ariel300zx]

@@BuildCreate ok,didn't get it!! Thanks

[@Laner84]

awesome video!! shes coming together now !! , was anyone else singing along to the song using "the final countdown" lyrics ? lol

[@BuildCreate]

Ben Lane getting there dude. Just got to carefully plan the next stage so I don’t fuck up all the prep.

[@neonnerd1364]

What did you do to make sure both sides are as close to matching as they can be? Any time I try to do wide body stuff from scratch I always end up with one side noticeably different.

[@shaunpc2512]

Hi again mate, would you consider making anyone else a set of these panels once you have got them to where you want to be? I have a relative with a STI powered brat which desperately needs more tyre on the ground. It’s a handful in the dry, crazy when it’s damp and borderline dangerous in the wet. 😂

[@renomacca1967]

streach your material over whole fender and fibreglass the whole fender

[@-DEATHSTROKE]

I'm building a 1:24 scale model widebody brat, kinda looks the same but I did a custom front and rear end too, and a rear window spoiler with a 2001 WRX engine and drivetrain and a 98 WRX rhd dash 👌🏻👌🏻

[@BuildCreate]

Awesome!

[@arturrosn9336]

👍Looks amazing!!! Extra job.

[@alincurut]

Amazing work! Keep it up!

[@alexvoelker5725]

What kind of foam is this

[@TheZooness]

Any thoughts about diy carbon front, side and rear splitters?

[@BuildCreate]

Definitely want to go carbon!

[@Hebrew_Loc]

What kind of Ute is that, its nice looking.

[@huskyhoon6541]

Probably a long shot with the age of the video but where did you get the foam from .

[@huskyhoon6541]

It's ok got the link lol

[@BuildCreate]

Hey man. Should be a link in the description 🤙🏻

[@huskyhoon6541]

Aye cheers mate 🤘🏼

[@brianstevens5520]

Damn dude that's awesome 🤘

[@stevenhunt9769]

Loving how it's turning out .. when are you hoping to glass it?

[@BuildCreate]

Thanks dude! I'm hoping to start glassing it over the xmas holidays. It's kinda crazy this time of year trying to get spare time to work on the car.

[@stevenhunt9769]

@@BuildCreate yeah fully appriciate that, looking good excited to see it :)

[@ossyhoff]

looks really good :D but its missing the lower bodyline between the door and the rear wheel

[@markbrand5842]

Best yet!! Keep it up!!!

[@BuildCreate]

Mark Brand aww, thanks man!

[@leftysomething]

Hi. Where you able to finish this project?

[@wdakota]

You look like a pro!!

[@BuildCreate]

Fooled you! haha.

[@wdakota]

Build Create can’t wait to see the completion! Will be watching!!

[@SupercarSeany]

Nailed it.

[@mosesmanaka8109]

It's insane.

[@DanoPT]

Great Job man !

[@BuildCreate]

Thank you dude!

[@rohilyash1905]

What is the material that you are using to give the form of the body?

[@adilhasmov457]

Hi, video is beautiful.What is the name of the material you are using?

[@jase_llan]

Pretty sure it's polyurethane (PU) foam 👍

[@adilhasmov457]

@@jase_llan Thank you. How do I get this product? I would like to order from Aliexpress. What exactly is the product name?

[@melvinabrahamsson3357]

Hi, I was wondering how much itd cost to buy these but fibreglass of you? If you would make moulds tho

[@BuildCreate]

Squeal The Smol Boi I’m not planning to make molds, but depending on interest I might be tempted to.

[@mrkonrady22]

Never clicked so fast 😅

[@mrkonrady22]

Andrew Harris Well I want to build an Audi RS6 style widebody (natural to the car shape) for my 3.0 2007 Outback to get rid of the horrible plastic flares though they are in body color. These videos are very inspirative 💪🏻

[@guitariste47]

How are you going to duplicate the right-hand side overfenders , since you 've glued all the bits; thanks?

[@BuildCreate]

Dominique Bovard my making two of everything in the foam. Easy.

[@vjtakeshi]

love your work.

[@BuildCreate]

vjtakeshi thanks man! Appreciate that a lot.

[@M-oneeleven-M111]

What type of foam do you use for the modeling sorry I know you have probably explained this a million times I have a Mercedes clk I wanna make a kit for to cover up the damage I did to the rear quarter

[@M-oneeleven-M111]

Ah man should have looked in the description first (facepalm) thanks man great vids great info

[@BuildCreate]

No sweat dude! Have fun with the merc!

[@M-oneeleven-M111]

@@BuildCreate thanks man will do we have another one that we might try doing the carbon skin on Aswell as the wings do like to rot out 🤣 I love the Subaru stuff though man I remember watching you do the ducktail on your svx a few years ago when I had my e430 tried the same method only I think you were far more successful 😂 it's Ironic I love subies but drive a Merc yet have the legends "if in doubt flat out" tattoo'd across my forearm but any Great work with both the Svx and the Brat both such rare cars to see nowadays especially a Svx anyway keep it up man 😃

[@designintellectac6211]

Is that polyurethane foam sheet available in india ?

[@dantheman321]

Adding that rear fender is bringing it altogether now and it's looking really good buddy. Will you be adding anything to the door or are you leaving it standard? Can't wait for the next video👍

[@BuildCreate]

I don't think i'll be doing anything with the door. I'm going to add a side skirt to fill out the bottom a little more though.

[@ivanvillanueva5841]

Amazing bro amazing

[@slepyrecords561]

what material are you making these molds from?

[@BuildCreate]

Polyurethane foam board!

[@Eduardo_Espinoza]

looks like a mini trophy truck 🔥👀💯🔥

[@BuildCreate]

That's the kinda vibe i'm going for.

[@leonardosouza6290]

The Final "CUT" Down!!!

[@static7]

love your videos man! keep up the grat work!

[@BuildCreate]

Static 7 appreciate you checking them out dude!

[@demoncustoms4014]

Crazy 🤩