Refining fibreglass/foam overfenders!

We're getting very close to the final stage! Next up will be painting the final finish!
T-shirts and stickers here!
buildcreate.big...
Contact me here! [e-mail]
Follow me on Instagram @pneumachris
Music / kochetkovv

[@dreamteamofficials9225]

Learning off your content for when I begin my project

[@BuildCreate]

Dream team officials stoked the videos are helping dude!

[@ProtonFilms_Mark]

Comprehensive, straight to the point. Made me tear up, finally, a car vlog that didn't tell us their entire life story for 30 seconds of usable content. I salute you.

[@BuildCreate]

So glad you like the channel dude!

[@heartbreakandmotorjive1867]

I watched some of your videos a year or two ago. I watch a lot of car content. I rediscovered your channel and subscribed around the time you started this project. Really enjoying it. Your videos are definitely improving. I like the realness of your presentation. You show the success and the fails. I also appreciate the tone in which you speak and the music. So many other KZbin personalities literally yell the whole video and swing their arms around like lunatics, or come off very robotic. Thank you for being different and taking the time to find what works for you. As a musician I would compare it to when a band finds their sound.

[@philipcrawford9879]

Coming out great man I love it, can’t wait for the rears

[@BuildCreate]

philip crawford thanks dude! The rears are gonna be a bitch, but I’m looking forward to it.

[@ADHDCUSTOMS]

This bloody amazing and I will be using this same method and posting videos on my channel. Will be doing this on a vw polo breadvan. Thanks so much for the info and what products to use.

[@quentinkelly8411]

You should definitely fill the open section at the back of the over fender with like a louvered vent so it fills it in. I would also make the front of the rear fender look a little more like the back of the front fender but not an opening angle it back and fill it with a vent. I think that with all the flat angles having the one section glued down behind the door following along the body line curve might make the front of the back panel look a little wavy. But all in all looks great so far. I can’t wait to do this to my corolla

[@T0tenkampf]

Looking great, was really looking forward to seeing you make a mold though.

[@stuartraffle7148]

Excellent progress Chris. Best video yet too.

[@BuildCreate]

Stuart Raffle glad you like it dude. I want to make them as interesting as possible for people.

[@RygarTheDestroyer212]

I think adding the indicator back is a nice touch. There are not many builds that are this inspired on KZbin :)

[@BuildCreate]

RygarTheDestroyer thank you so much for the kind words dude. I’m really happy I put it back in, especially when the orange pops against the black.

[@Ben-sg7ie]

Awesome videos, just discovered your channel because I'm researching how to use fibreglass. In the summer I'm going to create a bumper extension, as I'm fitting the lower part of a rear bumper onto my fabia estate and the bumpers is from a Hatchback vrs, so it doesn't rap around far enough.

[@upnorthviking823]

Cool! Was looking foward to a video from u soon! Love your project!

[@zensmylie5393]

I nearly had a heart attack when you said you were changing the wheels, so relieved when I realised you were sticking with similar ones. They look better as well. Great video as usual 👍🏼

[@BuildCreate]

Sorry for the scare! haha! Glad you like them dude, im really happy i switched them out.

[@ItsDobbs]

A little tip for the body line, put 1-1/2 to 2 inch wide piece of tape, all the way across, straight split on the body line...and sand up to it. Then go to the bottom side with the tape and sand down to that. That will usually give you nice, straight body lines.

[@TheZooness]

I’ve been waiting for updates !

[@BuildCreate]

TheZooness sorry for the wait dude.

[@DjKevLite1]

me too

[@quentinkelly8411]

Looks great! I would angle in the edges around the bumper like you did at the very front by the headlight to give it more angles

[@sebspeed6403]

Nice! I've used fibral for many projects works amazing and adds a ton of structural support.

[@BuildCreate]

Seb Speed it’s the best! I wouldn’t use anything else to be honest.

[@KyushaStyleTuning]

Excellent work. Nice attention to detail. 😎👍

[@muchcat1113]

Man I'm so glad I found your channel! I have a 1982 dodge rampage, which is similar to the brat, just fwd lol

[@BuildCreate]

Man, i just googled that. So rad! Thanks for tagging along dude!

[@muchcat1113]

@@BuildCreate hell ya, love the content

[@rhranger5040]

Looking good ! Haha yeah 180k sub's would be nice for you mate

[@01FozzyS]

Nice little details,Chris! Definitely steel wheels are the fit.

[@BuildCreate]

01FozzyS thanks dude! I really can’t imagine having a different wheel on there now. They were instantly perfect in my eyes.

[@winningdesigns6067]

Turning out great so far! Can't wait for it all to be finished :)

[@BuildCreate]

Thanks dude, it's gonna take some time, but it will be worth it.

[@MattMcDrift]

Looks Good, good idea smoothing that line 👍

[@BuildCreate]

Thanks man, i think it made a huge difference.

[@LeifMadsen]

Looking very cool. Found this whole series searching for carbon fibre and fibreglass work. How are you planning to mount everything? Just some rivet hardware along the outsides? Wondering if you need some structure under those panels. Interesting to see how the other 4 corners go. What is the plan to make sure everything is symmetrical? I really like the use of the foam board. I've seen some videos using spray foam and sanding and it looks like a complete mess. I also thought you were going to create molds from these instead of straight to fenders so you deked me out :)

[@Davewagon]

Best production values yet, loved the new video editing additions!

[@BuildCreate]

Davewagon appreciate that dude. I want to make the videos as interesting as possible...figured a few new additions would help.

[@korbinjerry6193]

I guess im randomly asking but does anyone know a trick to get back into an Instagram account?? I was dumb forgot the password. I would appreciate any help you can give me

[@devinlyle7283]

@Korbin Jerry instablaster =)

[@zcsamy]

Looks good 👍

[@shanewright6958]

It's looking good. Another great video 👍👍🇨🇱

[@stantons27]

So awesome man good luck

[@carswithcrackers]

Dude! I'm loving your channel!

[@BuildCreate]

Thank you sir!

[@georgestam1710]

Mate,how much did it cost the resin and fibers? I calculate to do my E30 fenders too,but it will cost 100+ a Fender...with 180 euro i can buy ready both of them... Good job btw,it's beautiful!

[@efraimpires3201]

I need to learn how to make bumpers.

[@BuildCreate]

Just give it a try dude. Got to start somewhere!

[@alexanderrotar4797]

Can you give us more content with the Subaru? I would really love to see more about it and see how it looks now after its been finished for a while!

[@BuildCreate]

Alexander Rotar when the weather clears up I’ll do a walk around of the SVX.

[@alexanderrotar4797]

@@BuildCreate Sounds great!

[@garyjacques6139]

Looking good bro 👌

[@DYFEA]

okay im DEFINITLY subscribing!

[@BuildCreate]

DYFEA Thanks for joining the channel dude!

[@skeens85]

Looks great

[@iambasic2991]

Wow we've come so far!! Didn't even realize it.. 3 years already!!

[@an7d7y]

Great work man

[@BuildCreate]

Andy G thanks dude!

[@jasonmapotts]

So nice its coming along nicely. what color is the car going to be?

[@BuildCreate]

jasonmapotts thanks man! The car is staying the same colour. I’m just going to give it a blow over to freshen it up.

[@DjKevLite1]

thank you for doing this. now im going to do this to my car

[@BuildCreate]

My pleasure.

[@fowler_steam]

Looking good man :) What's the name of the tune on the little intro bit? Sounds proper 80s, I like it ha

[@BuildCreate]

tecnical68 thanks man! The band is ‘FM-84’ and the song is called ‘running in the night’ probably the best synthwave song out there!

[@fowler_steam]

@@BuildCreate thats my evening sorted! Getting lost down the rabbit hole of more awesome music haha

[@BuildCreate]

tecnical68 ha! Well, if you like those guys you should check out Timecop1983, the midnight and gunship. Some of the best out there.

[@menglis3]

Now how do you make sure the other side is exactly like the other?

[@BuildCreate]

I made two of everything in the foam. marked all the points of contact and made two of all the spacer blocks between the car and fender. Came out exactly the same on the other side.

[@godlessrlgn]

Can't wait to see this done👁👄👁

[@jitsumonice2474]

Love your videos

[@BuildCreate]

Thank you!

[@RumbleGarage]

For your body line. Strike a line with tape. "Masking tape". You want to use the block to sandflat up to that tape. this will cut a straight line and not allow you to send over the tape and take away material. Then pull the tape. Put the tape line directly under now. Then block sand up to that line. This will give you a perfect edge. I have over 20 years plus autobody experience. Watching you block sand the edge. Just want to give you pointers for shaping material better. Tape is your best friend as a body man. I just noticed that your body line is not straight. Hope you understand what I mean. Hope it helps

[@BuildCreate]

Rumble Garage funnily enough my boss said the exact same thing! I took it to work and masked out the line, worked perfectly. Really appreciate the advice dude, I’ve still got a lot to learn but I love finding out new techniques.

[@RumbleGarage]

@@BuildCreate awesome brother love to help 👊

[@RumbleGarage]

@@BuildCreate not sure if you have checked out my KZbin channel. I build Subaru only. 😁

[@DCtropical]

I wanna do something like this on my car but I think its pretty hard getting it symmetric on each side

[@BuildCreate]

Make two of everything, including the spacers from the body to the foam. also, take lots of measurements. Don't forget to take your time.

[@DCtropical]

@@BuildCreate I'll definitely try it, thanks!

[@aboodlikesit]

was it itcy?

[@bucketletsgo6543]

Where’s the music all from

[@patfilice]

Yes yes yes a new video

[@BuildCreate]

patfilice I was going to upload it tomorrow, but I couldn’t wait haha.

[@American_Cycho]

Steelies All Day 🤜💥🤛👍👍👍

[@feckry]

what is the tool name 6:04 ? btw, good job 👍🏻

[@BuildCreate]

Feckry Ag Ghani it’s called a ‘former’ super handy to have.

[@2000mustang6]

Just bought one on Amazon a 20cm. They call it a "contour tool"

[@monstersquashracing]

🙏

[@Kai77884]

Hello a great work perfect 👌 from Germany 🇩🇪 Kai

[@BuildCreate]

Kai T4 Fahrer thank you!

[@andrecastrocba]

TOP

[@maze2756]

👍👍

[@juneadmemon]

Brother please tell me your instagram username

[@BuildCreate]

Jinny Memon @chris.purr 🤙🏻

[@dickdazzler8354]

Epic video dude. Inspirational