POD X3 Live Review!

POD X3 Live Review! You're going to fall in love with this multi effects pedalboard and it's usually about $150 - a bargain when you consider all the effects pedals that are built-in, including a cab simulator!!! If you're looking for something fun that you'll love to own, get the POD X3 Live to start, then upgrade to the POD HD500 and eventually to the Headrush Pedalboard. I feel like the future won't have any real amps, imagine that guys from Cradle of Filth ONLY use the Mooer micro line of pedals and ONLY TWO of them! The Mooer 50/50 which is a Peavey 5150 clone and the Mooer Radar Cab Simulator. That's it!

[@sebassanchezc-1379]

I've just received my POD X3 LIVE and IT'S AMAZING. SO POWERFUL. ALMOST PERFECT. LOOKS BRAND NEW. 😋

[@louistorres]

I absolutely LOVE my X3 Live and so glad you love yours too! It's such a powerful tool and agree that buying pedals is a scam of all scams!! Especially when you can get a used/ mint X3 Live for under $200 and be fully set!!!! :)

[@Roger-il8iw]

If you like running straight to the PA these things are amazing. And wow running a mic through it makes great vocal tones.

[@Stratboy999]

I have one of these. It has sat in its flight case for about 5 years now. It was good to use live, convenient sounded all right with judicious tweaking. Probably about time I got it out again.

[@craigzinga]

Nice score. I scored one off of Ebay for about a smidge more than 150, I use it for guitar at home and bass for live shows. It has a great 18” bass cab sound in there that chugs up the high end with a pick tone. In a pinch, I connected a single mic cable to the direct out xlr connector on the X3 live, put a 1/4” instrument level adapter on the other end of the cable, then plugged straight into the instrument input on the front end of the amp. Works!

[@louistorres]

Holy smoke, I have to try that now! Haha! I've always either ran into my Headrush FRFR112 or used the 3/4 cable method! Lol! You are the man for experimenting!!! And thank you for sharing that!

[@kevind9179]

Hey mate. I've had this pedal for years and was always frustrated in the setup. You explained it all in a matter of seconds with two cables. Cheers for the info.

[@louistorres]

Kevin! What's up brother! I'm glad to assist! Grab it and have fun! The X3 Live has brutal tones that ring out when you run through an amp! It's great!!!

[@kevind9179]

@@louistorres I'm on it 😁🤘🎸

[@sebassanchezc-1379]

Individual pedals are a scam...🤔

[@ordohereticus3427]

Great piece of kit on its own, and an excellent compliment to many high gain amps, given that one can add an array of effects, EQ and boost simulations. A steal by virtue of the used market.

[@johnpainter4313]

Dude your a life saver I've been going mad how to set this up I paid 100 and you finally solved my problem thankyou sir!🤘

[@kadj1016]

If you have a laptop or desktop with a DAW on it, your X3 live makes a great interface for direct recording. You can also use it to record keyboards and vocals with into your DAW. This is the best thing I have ever owned! Very versatile and you can download tons of patches on the line 6 website for it under the podfarm section of their site. I created many cool patches and put them on the site (which you can do also). Built like a tank. There are tons of patches already on it and I found a whole new section of patches I didn't even know was on it a month or two ago. I will eventually make video on how to use your pod x3 live to record directly to your computer (or DAW)... If you want to record keyboards though just go in through the effects return jacks on your pod x3 live.. Plug a 1/4" jack from your keyboards out jacks and go directly into the pods effects return jacks. Have the pod set on a clean channel, so as not to add distortion or any other color into it.. You can use various effect patch channels with your keyboards, I just wouldn't start out on a distortion channel, best to start on a clean patch and then try effects at your discretion. I like to play my pod x3 with it connected to my laptop as you can easily use gearbox to change settings lightning fast. It's so easy to drop effects into the mix and change parameters with blazing speed and watch your pod's display change as you change things on the laptop's screen.. Pretty cool for sure!

[@louistorres]

Now I have to go to the website and download some new patches! Thank you so much for the info and yes, I love my X3 Live!!!

[@kadj1016]

@@louistorres The patches I made are created by "gtarsonline6" , but Louis, there are thousands of pages of patches.. Many are repeats, but there are enough on there to keep you busy forever probably.. What I do is make a folder on my laptop and put the ones that sound interesting in that folder, then transfer them to the x3 live if they are real good ones.. Use the gearbox software (free download) on your computer, to shuffle things around with. You can drag and drop patches right in to the slots you want them in on your pod with your mouse etc... Gearbox makes that part easy.. Just make sure and hit "save" after your transfer stuff, or your pod will forget that you put them in there.. The save button has to be pushed to keep the new sounds. I can actually spend a whole evening going through all of the new patches! There are some great ones on that site for sure.. Then keep coming back every other month or so, and see if there are new ones you like. Download as many as you like onto your computer's folder you make, then later hook up your pod to the computer any old time you want via the usb, and go through the folder.. All you have to do is double click on the patch in the folder and it will load automatically to hear on the pod x3 live.. just go down the list and click, then play, then go on to the next one, OR, download the one's you like onto the pod by dragging it to a spot on the list in gearbox. Then hit the save button and it will be there until you replace it with something else someday.. Way cool! Have fun. If you need any further advice, just hit me up on here.

[@JEAG]

Look for a thing called "the 4 cable method" with the POD. You'll be able to use effects before and after your amp's pre amp. It's pretty dope actually to put your delays after your amp's distorsion but make your amp play that cleaner signal anyway.

[@louistorres]

Bro, want to laugh! The whole cable thing drove me nuts, so I bought the Seymour Duncan Powerstage 170 and run my POD X3 Live and Headrush Pedalboard through it and out to my Mesa 412 cabinet! I didn't know you could add pedals too, so I'll give it a shot and mess around with it again! Hahaha! Thanks for the heads up, brother! I really appreciate that. I'll try that tomorrow with my Boss DD3 Delay pedal. : )

[@JEAG]

@@louistorres I was talking about the POD. Don't know if you can do it with the headrush. Probably you can but I just bought an X3 like 9 years ago and never looked much else. I've learned all of its features and most of the time, gearheads everywhere get surprised with my tone being just achieved with that pedaalboard and sent as a stereo signal directly into mixers. Gets the job done and I'm not a gear junkie that much xD

[@i_am_a_stupid_fool]

Just realized i can't use the pedal with my blackstar amp after watching the video (it doesn't have an fx loop option) but your playing cheered my up a little so thanks for your help anyway at least i'm not going to be trying to get it to work for the next two months like a fool

[@louistorres]

It's okay, brother. Get yourself the Seymour Duncan Powerstage 200 and enjoy ripping the heck out of things!!

[@i_am_a_stupid_fool]

@@louistorres thanks!

[@tomdameek]

Very helpful video Louis thanks. It looks like exactly why I need as a broke home player. Cheers from Ireland 👍🤟

[@modscientist9793]

Bro..!! L'Amours...the good old days...the GSP21 was my first unit as well.

[@louistorres]

L'Amour was so much fun, except that Tyketto played there every Friday and Saturday!! Lol!!!

[@steveb7714]

Thanks Louis, I have one of these and never considered the way of routing you demonstrated. So, based on this, to get stereo you might go FX Send to a splitter box, then left and right out of that to the front of your amp heads, FX loop outs on both back into Live Out Left and Right on the Live 6?

[@GAZolloYT]

Yeah Dude, Shout out to Vito! Nice review, thanks for sharing.

[@allenkennett6769]

Youre so down to earth. I love you

[@louistorres]

Hahaha! Thanks, Allen!! :)

[@colboysigmax]

Enjoyed that vid! Excellent!

[@mikemiller2518]

“Long story…. Anger issues” Ha love that brother

[@louistorres]

Hahahaha! I literally grew up with a Mike Miller! What's up, Mikey Mike!! :)

[@mikemiller2518]

@@louistorres Mike Miller hailing from st Augustine Florida brother!!!!!! What is up! Thanks for the video. I received a hand me down pod x3 with zero instructions, now I can at least run that sucker thru an amp You da man!

[@andrewreynolds2647]

Great fun review, thanks for sharing Louis. The best 23 minutes i have spent in a long time. Cheers Andy.

[@jettramel]

I agree, me too, brings back such memories (wanting shite you can't afford as a kid)

[@akaboo69]

Just got me an pod x3 red bean. It's not too bad actually for an old unit.

[@louistorres]

You got the bean!! I always wanted to try one! I'm glad you said it's not too bad. That would be fun to use!

[@eeveeaitch4735]

do you know how to set it up as a pedalboard so you only use the x3 as effects and my tube amp for the real signal

[@brokenchains]

Nice!!! I have the XT Live, I don’t use it much because I bought the HD500 soon after, I need to break it out!! I like the footswitches better on the XT, I bought all of Glenn Delaine’s patches for it!! Great unit!! 46, you just a baby!! Sick watch by the way 🤘🤘🤘

[@louistorres]

You're going to laugh!! After posting that video, I reached out to a guy locally who's selling his POD HD500, which I think has a looper built-in, that's what I want it for! Lol! You have so many great toys, Jimmy!!! I love that you're like, "you see that? I'm going to buy it now." Hahaha! You got me fixated on that 2000w Headrush FRFR cabinet!

[@brokenchains]

Louis Torres Yeah Louis, that cabinet is great because all you need is the XT and the Headrush, what you hear through your headphones is the same out of the cab, you can use the IR’s and it’s so freaking loud!! My bands first show is Sat and that’s what I’m bringing with my Atomic Amplifire pedal as well!!

[@cam-inf-4w5]

18:32 danzig circle of snakes pinch harmonic

[@kulishekkulda3785]

Hi, a bit late nevertheless did you try it with your harley benton gpa 100 which you presented in other of your videos? I’d like to use it at home for my training and am interested if the tone will be ok by badroom volumes - I don’t know if I should bye the hb, the line I have for many years without using Thnx and greetings from🇨🇿👍🥃

[@jeffsmiley3213]

Hidden jems!! They are perfect for practice n messing around or even your entire fx rig. Hell, could even be a backup in a pinch. Hook’n it up through the tube amps opens up a whole new world of chugs and tones. And there’s a lot of other brands that go dirt cheap because they’re “old” now or “un-cool”. Shit, one of those paired w a stereo rack mount tube power amp.....cha-chug!! Lol. Love it!! Btw....I almost bought an eleven rack unit for $180 last month. Kicking myself for not.

[@louistorres]

Oh my god! I've been using this thing with headphones for a bunch of weeks but today, I ran it through my Mesa and love it a ton!!! I feel like I may need to sell all my pedals and get a Helix! Actually, maybe that HD500x bc I don't have to deal with any software like you do with the Helix. Lol! Oh no! You need a rack in your life, Jeff!!!! :)

[@barry5607]

Hey Louis new subscriber here .Excellent Video my friend Now im gonna help you!There is a switch left above of the Master Volume for going direct to the Amp or to a PA. You have all the effects pedals and amps you need within the X3 keep up your Great Work! Peace 🙏😎🎸

[@louistorres]

Happy Friday, Barry! I'll pull it out and run it again! I haven't used it much since getting the Headrush and Kemper! :)

[@INNERPR1SM]

Thanks for this video! I'm looking at a pod on the buy n sell. I've gone through so many floorboard pedals and still struggling to find one worth recording with. The worst for me was the Headrush I paid $1400 what a waste of money. I found a digitech rp 20 , and a newer rp1000 that hold up ok as long as I run it through an amp to filter out the digital sounds before my recording interface. Than mix with amplitude 4 and Bam! Great sounds.

[@louistorres]

I love my Headrush pedalboard! I'll check out the RP20! My best friend had one years ago and he always raved about it!

[@jcalzada74]

Rp1000 are obsolete sad to say that they where good back on the day not hating I had 2 of them😂😂😂 but I even upgraded to the rp360 one whit the expression pedal one whit out I couldn't never make them sound good bought them because I heard their racks units where bad ass and I thought heck this pedals might be good to

[@DanielRodriguez-eh1qd]

I would stick with the bad Horsie for wah. That’s my favorite wah pedal and the switchless operation is so much better than activating the way on the pedalboard with a click.

[@louistorres]

Funny enough, I love my Bad Horsie and don't ever use the expression pedal on my X3 Live or on my Headrush Pedalboard either. Lol.

[@ericchristiano623]

just bought one for $100 picking up tomorrow

[@louistorres]

YOU ARE GOING TO LOOOOOVE IT!!! Hahaha!! It's such a great tool and you can totally create BEAST tones with it!!! How awesome! $100!! That's PERFECT!! Congratulations!!!

[@lomba1974]

i got the bean since 2014 i use the dual amp mode for really good sounds, i love it!

[@louistorres]

Omg, the bean! I remember seeing that years ago and wondering what it was and someone said it was a multi effects processor! I love Line6 products! I have the POD X3 Live and their wireless G50 and they're both great!

[@lomba1974]

@@louistorres i ment the x3 beam!

[@waldalwahsh7833]

guys i’m in a pickle here,i’d like an multieffects pedal(or in this case an effects processor) and i’m deciding on either the line6 pod x3 live or the line6 pod x3 please tell me the differences so i can get out of this unfortunate situation 👍

[@louistorres]

I have the X3 Live but there are a few KZbin videos that compare the two. Check those out.

[@somebodyspoetblanco7264]

Great video bro! Any chance you will do another tutorial video on this bad boy? (Navigating the menu, custom settings etc etc) Just got one and kinda lost with it.

[@louistorres]

I really should pull it back out and run it. I'll keep you posted. Maybe I'll do a Pod X3, Headrush Pedalboard, Kemper Stage episode. :)

[@bakiki6031]

I would also be interested in a tutorial :)

[@jbpmusic4900]

Wow I've been running just direct out into my amp

[@eternoc70]

i just boght one and a pod xt live both will be here in a couple days . i also have a helix floor . time to compare 4cm!!

[@eduzc1353]

Hey man! I just watched your baby bomb video and now I'm thinking of buying one of this (or maybe a hd-300) and a baby bomb for live gigs. Do you think this will sound good since I'm not using any real amps?

[@jackguitarfreak3]

i was about to sell my x3 today but when i saw this i change my mind!

[@isaac2fly4you]

I have a Pod XT Live It’s Awesome I Think It’s Easier To Use Instead Of A Pod X3 Live What strap do u use

[@sajjadanik]

POD xt live, Pod X3 live or boss gt1. Which one would you suggest me to buy? I need something simple with good sound

[@louistorres]

Simple with good sound, you need the Kemper Stage, those others were made more than 12 years ago.

[@sajjadanik]

@@louistorres so boss gt1 then?

[@petea8644]

Going from fx send on the amp to the Lout on on the pedalboard doesn't make sense... both are "out" so the signal is meeting halfway down the cable and cancelling out or doing nothing, I think you mean run the Lout to the FX return on the amp... try that, see if it sounds louder/maybe has more audible effects etc..., honestly it seems unnecessary tho because you're already going into the input on the front of the amp, so why would you also plug a signal into the effects loop?

[@louistorres]

Hey Peter! That was my stepping stone to the world of multi effects pedals. More often than not, I was using it with headphones anyway. Hey, if you scroll through, you'll notice that I've since gotten the Headrush Pedalboard with HR/FRFR112 speaker. It's so much easier to use with XLR out, and I also have the Seymour Duncan Powerstage 170 poweramp that runs from my Headrush into my Mesa 412 cabinet too, so there's no need for fifty cables anymore. I'll probably give my POD X3 Live to someone eventually. : )

[@petea8644]

@@louistorres I'll check out that gear, sounds like a sick setup! Actually I found your video while doing research on the X3 b/c I'm trying to get something to record with that's in my budget and sounds good enough - I'm definitely on board for the pod x3 if you're ready to get rid of it, I'm in BK NYC

[@akaboo69]

Not bad sounds very amp like. I use an pod HD

[@joepons329]

Always buy local !....

[@ericajohnson7535]

I ditched the amp completely. Processor -> Mooer Baby Bomb as a power amp -> straight to the 4x12.

[@user-qr7ee2cp4y]

I have mine set in in a 4 cable so reverb are after the distortion and wahs and drives are in front of the amps preamp. Who are we kidding... for $150 it's a ton of fun and can at least get you close to all the stuff it emulates. Wished it had better buttons. Watch out, those buttons will go bad with enough use.

[@gregbull4549]

repair video on youtube shows how to open the unit use electronic contact spray on micro switches cleans it all up worked for me on all three of these i've owned and keep on playing not to mention the amount of tones you can down load on line so cool

[@johnpainter4313]

Question where would my drum pedal go??

[@h4drummer]

!!!HELP!!! I have this slap back type delay on the pedal I CANNOT GET RID OF...i can turn the delay off and on with the button on the x3 live, it shows it turning off and on....but it doesn't change the the echo. if i mute then tap my strings, The sound echos back, and ican’t change its echo speed with the TAP button on the x3, and its like that on ALL of my patches... YES I reset the board, still there...

[@louistorres]

I've never experienced that before, so I don't know how to resolve that issue but ask the question in the X3 Live Facebook group. That's where I go when I run into any technical issue and usually, one if not five people will be able to help. :)

[@Viking_guitarist]

I use the clean channel and go from Lmono to input and guitar in to my guitar job done 2 cables not 3

[@louistorres]

Two cables!! I love it!!

[@karce1981]

I've had the X3 live since it came out, I do direct left to fx loop return on one amp, and direct right to the fx return of the second amp.... I use dual tone setup for my dirty sounds, each amp gets a different tone, sounds fat and is like there are 2 players...

[@karce1981]

You don't need to use the preamp portion of your stack, the pedal does it, you just need the power amp portion to boost your sounds

[@louistorres]

Holy smoke!! WHAT!!! Bro, I didn't know you could split the pedal to two separate amps and OMG!! That has to sound amazing!!!! Now I have to use my two combos to try that out!! Hahahaha! What two amps do you tend to use anyway? I'll probably end up using my Peavey 6505+112 with Celestion V30 and my Randall RG1503C 212 that also has two Celestion V30s! You are the man!!!!

[@karce1981]

@@louistorres I use my jcm2000 50w and AVT2000 150w both going through their own 1960A cabs

[@karce1981]

Make sure you set your outputs for each tone ... One pans left, the other right....click the Output button to configure that...use the Tone 2 switch to hop back and forth to configure 2 different amps in your bank, then hold it down to combine both sounds, then save it

[@raphexe]

I had one it was cool !

[@ShreddyGuitar666]

I was gonna recommend the Helix by Line 6 but then again I feel its gonna be a whole lot of money unless youre ok with spending 600 on the Helix Stomp because you can add your own third party IRs but there have been videos comparing that POD X3 to the Axe FX but then again the X3 does not have the third party IR compatibility tho

[@louistorres]

Two weeks ago, I was going to buy a new Headrush Pedalboard but decided against it bc I need baby steps!! Lol! I just learned about IR!! Lol

[@ShreddyGuitar666]

@@louistorres headrush would not bea good choice of amp modeler because the touchscreen would be prone to shock damage and it would cost a few hundred to get it fixed, so I would steer clear of headrush and lean towards the Helix but it's alright tho, baby steps

[@louistorres]

@@ShreddyGuitar666 I'll check out the Helix then! The guy I bought my Randall RG1503C sold it for a few dollars bc he had switched to that Headrush Pedalboard. It was the first time I had ever heard of it. Didn't know it had issues with that touchscreen but yes! I'll check that other POD! Thanks for sharing, brother! I'm going to watch a few videos with it, yours included! :)

[@ShreddyGuitar666]

@@louistorres not a problem man, that is if one is reckless and negligent with the protection of the touch screen

[@VincentDagenais]

Hey Louis! Thanks for the demo, highly wish to get one of these and replace my 2.0 POD. Wanted to track my stuff in Reaper with this, wet and dry, have you tried?

[@louistorres]

Vincent, it's such a great option and reasonably priced at this point. You'll love using it with Reaper and you can use it direct or run it out and out of an FRFR speaker system. Get one!! It's so great!!

[@rhitosparsha]

If you mean to say recording a wet and processed tone, then yes, it's absolutely possible! You have to get the Line 6 ASIO drivers. After you've done that, you'll find eight inputs in your DAW. Inputs 1-6 are various combinations of the wet signals, while inputs 7&8 are the dry signals.

[@timcollins5424]

I bought one of these for Lincoln Brewster tones? .I though they were built in this x3 live? I went on is website, and tried to down load them?????? Any Help????

[@iddystrings581]

Hey.. can you please put a video on how to loop on the pedal

[@louistorres]

Unfortunately, the X3 Live doesn't have a built-in looper. It's great to use if you're starting out with multi effects processors but the X3 Live not having a looper is the reason I bought the Headrush pedalboard, which offers an incredible multi track loop option. There are videos where guys use the delay to create a short loop effect but it's not like a typical loop which allows for layering, like the EHX 360 or EHX 720 pedals.

[@iddystrings581]

Louis Torres how do I do that...I just want to be able to play something then it loops so I play on top of it or something I saw other guys doing it but I didn’t get to see how they do it and I looked everywhere I can’t seem to find the right stuff please help

[@mwowm2011]

I love this guy :-)

[@chrisburton7865]

Hey mate, with mine I plug into aux in the back of the head, what does the second into the front of the amp do?

[@prisonmike4971]

Dude tune that guitar. But I'm selling mine tomorrow..it's a fine piece but underwhelming overall I feel.

[@HuricaneChampagne]

can you help me get mine to work on my amp?

[@louistorres]

What amp do you have?

[@HuricaneChampagne]

@@louistorres JCM 800 Lead Series Marshal 🥺

[@jesterraj]

yep Gsp 21 pro was d thing...back then

[@louistorres]

They were!!! I think it's crazy that you can find them for under $100 and they still sound great!!!!

[@patrickalexander7164]

Why can’t you plug your guitar directly into the processor instead of an FX send from the amp?

[@louistorres]

I don't know what you mean, if you're using this X3 Live you have no choice but plug into the processor. Now, if you have FR speakers, you can run out to a Mission 412 cabinet and call it a day. But if all you have is a head and normal cabinet, then again you have no choice but to run it through the effects loop using the three or four cable method.

[@dale287807]

Ive bought almost all the line 6 pedals now and for some reason the line 6 xt live has out shined all of them...

[@louistorres]

Funny enough, I've heard the xt live was revolutionary then the X3 Live nearly doubled all effects and I know a few guys who sold their HDs to return back to the X3 Live bc it was the best between the XT Live and the HD line. I love it X3 Live, it was my intro to the digital pedalboard platform which was followed up with my Headrush pedalboard, which is lightyears ahead of that X/ HD lineup from 2010-2014.

[@nethbt]

Got one lately for just $79 Canadian....Approximately $60 US....I don't know how to use it properly the learning curve looks steep lol...btw I currently use the YAMAHA THR30II and BIAS FX 2

[@louistorres]

What!! $60USD is amazing!! Hahahaha!! I love mine!! AND you have the THR30II!! Is it really loud at 30watts?

[@iplayloud2]

For really fluid high-gain leads should I get the X3 or HD? Thx

[@louistorres]

You know, I've never used the HD before but when I first got it, I was reading how some guys didn't like the HD. Google it and you'll read what people who switched from the X3 to the HD have written. Some had the X3, upgraded to the HD and went BACK to the X3 and they have great reasons for doing so.

[@238839]

Are you using x3 amps or are they turned off...what am I actually hearing on this video? The Mesa or the X3?

[@louistorres]

You're hearing the X3 Live running through the effects loop, so it's all Line6.

[@238839]

Man o Man...I have had 0% success with this method...what am I doing wrong...is there a setting on the X3 that I am missing?

[@Crawl00]

Does it have loop features?

[@gjpcrazy6258]

You can't use this without an amp without an effects loop ???

[@ryanwhitesell6790]

No, you just can't 4cable setup. You'd be limited to direct plug in to the front of the amp which is fine for most home setups.

[@Dad-Gad]

Just bought one for £80 off reverb 👍👍👍👍

[@louistorres]

What a great price! That's about $107USD. You'll love using it, it's a really fun pedalboard! Congratulations!!!

[@joehernandez6260]

Anger issues long story 🤪 lmfao

[@louistorres]

Always living with anger issues!!

[@eeveeaitch4735]

Hi do you know how to run the x3 live so i have the sound of my real amp but the fx from the x3 live.

[@louistorres]

The only issue is that the X3 Live is a much older technology from roughly 15 years ago, so it sounds "digital." As an example, my Headrush Pedalboard and Kemper Stage both sound like real amps compared to my Line6 X3 Live. Unfortunately, you would have to get something newer than the X3 if you want something that sounds better or closer to real tones. Hope that helps.

[@eeveeaitch4735]

@@louistorres so you can't only use stompboxes from pod x3?

[@reav3rtm]

@@eeveeaitch4735 Stompboxes are kind of shitty yeah. But everything else is very good. And it has almost everything (except loop recording).

[@TheLewSiffer]

I have a Marshall g100r cd head. Would this pod x3 live be compatible?

[@louistorres]

Hey Lew, to be honest, I'm actually not familiar with that G100r CD.

[@TheLewSiffer]

@@louistorres I found a Pod x3 Live for $70 today. Picked it up and it worked. Just used your 2 cable method. Thanks for the upload!

[@louistorres]

@@TheLewSiffer OMG, for $70!! What a steal! Bro, I love my X3 Live, I'm shocked at how well it works. Keep messing with it, you can get ultra brutal tones with it! Congratulations on getting one!!

[@dale287807]

What does wiring it this way do different?

[@louistorres]

It's just a different way of running it. What does it do differently? Nothing.

[@macuswong4005]

What can you do if your amp does not have an effect loop? I own a Laney Cub 10, only has an input

[@louistorres]

It's time for you to get a new amp with a 12" speaker and effects loop.

[@macuswong4005]

@@louistorres I use my POD X3 Live on stage and simply plugs my guitar to the unit and from there into my amp, I do get the fx from the board. What is the difference?

[@louistorres]

@@macuswong4005 depends if you want your X3 Live to be affected by a preamp or not. You don't have a 120 watt amp with an effects loop, you should try one and see which you prefer but you currently have a 10 watt amp with a not-so-great 10" speaker. Sooner than later, you should consider upgrading.

[@macuswong4005]

@@louistorres can u have a complete chain with the preamp plugged into a clean amp through the output?

[@louistorres]

@@macuswong4005 did you subscribe to my channel yet?!!! :)

[@lymariejohnson391]

Dont wanta sound like a pric but sounds terrible bro

[@louistorres]

No worries, there's about 500 other episodes you can watch. Thank God this isn't the only one that's terrible, a few are. It's just a hobby. :)

[@denzilmoats3430]

You can absolutely use this with ANY GUITAR AMPLIFIER. DUDE,... Do some research, huh? Maybe learn like...atleast say, I don't know...take 3 things, right...then, atleast you'll have a little footing. People out here depend on these videos Brethren. Not Scolding you...just, do better Sir.

[@louistorres]

Guys like you, who don't do anything, are the reason I fucking hate KZbin. Bunch of whinny men who complain more than teenagers. Why don't you do your own research and figure things out yourself?! How about them apples? SMH. You're bitching about some fucking transistor that's 17 years old! Shut up and go buy a Kemper. SMH.

[@louistorres]

People depend on these videos?! What are you talking about!!!? Literally , go do your own research and figure things out instead of always taking the shortcut.

[@Bmanhaas]

Your reference to white lion band being stupid is not justified. Unless you are a better guitarist than vito.

[@louistorres]

Vito hasn't played guitar in 25 years, it doesn't even matter, just like White Lion doesn't matter! Haha! Why not mention Elvis while you're at it, you clown! Hahaha!

[@louistorres]

Another dude with 150 subscribers on his "channel." Hahaha! Maybe you should focus more on your channel and less on mine! Hahaha! Try to play catch up! Lol.

[@arroncajigas4260]

Too much talking

[@louistorres]

Hahaha! Pallaso, don't listen then. Change the channel, coño! It's easy to do! Hahaha!