Point Pod - Installing Bench Top Power Points

  Рет қаралды 81,615

Point Pod

Point Pod

Күн бұрын

Пікірлер
@peternelson9865
@peternelson9865 3 жыл бұрын
That is one of the nicest pop up outlets I’ve seen. I like how the cut piece from the counter top is used.
@jessicahavens1980
@jessicahavens1980 3 жыл бұрын
Wish these were available in the U.S.!
@weiyang3714
@weiyang3714 5 жыл бұрын
Is this available in the U.S.?
@passatgt
@passatgt 3 жыл бұрын
9:22 you could just fit the metal piece temporarily with masking tape on the top, easier than shimming it from the bottom.
@frankexploit2429
@frankexploit2429 4 жыл бұрын
When will this be available in U.S need this asap?
@julieellington3544
@julieellington3544 2 жыл бұрын
These look really good quality. Far better than anything I've seen. The fact you can put the worktop core into the top is a great idea, especially if you have spent a fortune on a decent top, the phone charging plates on most models are useless anyway! Wondering if you are looking into supplying into the UK?
@archjen
@archjen 4 ай бұрын
Very neat!
@Liberty2357
@Liberty2357 3 жыл бұрын
Should get a vacuum base for the drill press.
@davek849
@davek849 3 жыл бұрын
Can I purchase this in the US? Thanks
@derekhughes9248
@derekhughes9248 Жыл бұрын
OK, I bought this and received it here in South Florida….I’m having a VERY hard time finding a reputable company to cut the 4” hole that needed…perfectly and without a center pilot hole. As I said, I’m NOT running into anyone to cut the hole as he has shown. I’ve been to various equipment rental location and they all do not have drill presses but they have the heavy duty core-drillers. That’s not going to work for my kitchen counter island! Any suggestions!?!?!!?!
@bl0wfish
@bl0wfish 8 ай бұрын
talk to a plumber or electrician and get them to do the hole core
@HOETHAAU
@HOETHAAU 2 жыл бұрын
I see that the hole size a 100mm using a diamond hole Saw however all hole saws have a slightly different outer and inner cut size. Can you please recommend which hole Saw to buy
@franb2222
@franb2222 2 жыл бұрын
Apparently you need a 4mm kerf. A 3.5mm is common but haven’t seen a 4mm 100mm hole saws are rare. There’s an adjustable circle cutter you can get but that puts a drill hole through the middle of the retainer portion, and only goes down 30mm
@franb2222
@franb2222 2 жыл бұрын
Is there a version for going through 40mm timber? (tasmanian oak)
@jsnthurst1
@jsnthurst1 Жыл бұрын
You completely left out all of the wiring. I am trying to get the wire in place, in advance of the stone being installed and hoped this video would show whether there is an outlet in back if the cabinet or how it us wired and whether a coed goes up and down with the unit that requires slack. A few shots from inside the cabinet would gave made this video complete.
@manufj
@manufj 2 жыл бұрын
He is Ian Ziering??
@henrys8491
@henrys8491 Жыл бұрын
what will happen if water drops on all surfaces?
@boojit
@boojit 3 жыл бұрын
Do you have any recommended installer in Sydney NSW?
@rafamanzanares1046
@rafamanzanares1046 3 жыл бұрын
Where can I get it.?
@juif4642
@juif4642 Жыл бұрын
What about water ingress??
@icarossavvides2641
@icarossavvides2641 3 жыл бұрын
Is it worth some $400AU though?
@dosdourianenterprisesinc.2966
@dosdourianenterprisesinc.2966 4 жыл бұрын
Has the unit been used and passed inspections in the US. I live in S Fl and our electrical inspectors are looking for the approval paperwork on any fixture installed. It must meet certain standards, has this product been used and accepted in S Florida? Thank you SD
@michelleelwell5537
@michelleelwell5537 3 жыл бұрын
Did you ever get an answer?
@ash13311
@ash13311 2 жыл бұрын
It’s within 6 ft of a water source (sink), so this will not be up to code in the US. It has to be gfci protected.
@bucklaker3980
@bucklaker3980 Жыл бұрын
You can gfci at the panel.
@aaronm8694
@aaronm8694 3 жыл бұрын
Got anyone in Darwin NT that can install?
@shangcg
@shangcg 4 жыл бұрын
Good work
@aaronm8694
@aaronm8694 3 жыл бұрын
17:49 ROFLMAO!!!!
@troubledwaters391
@troubledwaters391 4 жыл бұрын
Would have been nice to what went on under the bench as the video is unclear in this area
@icarossavvides2641
@icarossavvides2641 3 жыл бұрын
Agreed, there was obviously someone operating the camera!
@angman2090
@angman2090 4 жыл бұрын
So you need a stone mason and an electrician?
@Varmintkillz
@Varmintkillz 3 жыл бұрын
Where in the USA can you purchase this. Fail 🤦🏻‍♂️
@richardclark4383
@richardclark4383 Жыл бұрын
These look amazing but $549? Hard no!
@orens7455
@orens7455 4 жыл бұрын
WOW....
@ariels9161
@ariels9161 4 жыл бұрын
It's not showing under what he did but those power points have a normal plug so you just need power under stone bench. After that you just drill hole and install. No need of stone mason guy
@mikhaelshadow
@mikhaelshadow Жыл бұрын
$500 + Hard Pass!
@aliciaoliveri3596
@aliciaoliveri3596 4 жыл бұрын
Is this available for the US?
@carolinedemers9555
@carolinedemers9555 4 жыл бұрын
Is it available in Canada? I am wondering if there’s some liquid on the island it will go throw the hole, doesn’t it?
Learn How to Install the Point Pod Multi Model Pop Up Power Outlet.
11:11
Why didn't I know this Secret before? Top 5 Amazing Ideas.
23:00
Fixotronic
Рет қаралды 4,5 МЛН
It works #beatbox #tiktok
00:34
BeatboxJCOP
Рет қаралды 41 МЛН
Каха и дочка
00:28
К-Media
Рет қаралды 3,4 МЛН
It’s all not real
00:15
V.A. show / Магика
Рет қаралды 20 МЛН
coco在求救? #小丑 #天使 #shorts
00:29
好人小丑
Рет қаралды 120 МЛН
Point Pod kitchen mess
2:38
Point Pod
Рет қаралды 1,9 М.
Point Pod Installation
11:11
Sparky Direct
Рет қаралды 1,9 М.
QUARTZ COUNTERTOP | Everything You Need To Know
12:11
Mark Tobin Kitchen Design
Рет қаралды 320 М.
I Salvaged a Giant Wooden Table from Disaster and Found HIDDEN DANGERS
39:02
Woodworking Projects ideas
Рет қаралды 7 МЛН
How to Install Pop Up Socket / Tower Socket in Kitchen Worktop - From Aliexpress
11:58
Practical invention - DIY Creative and Useful Tools For Handymen
24:38
It works #beatbox #tiktok
00:34
BeatboxJCOP
Рет қаралды 41 МЛН