Polaris 9R OVER-REVS! \\ Bikeman Snypr Clutch Weight Install

[@larrypasha5015]

Really appreciate your video's, especially the one's for the newbies like me. Would absolutely love to have a friend and riding partner like you.

[@JasonCaville]

Thanks for saying that, glad I could help ☺️

[@jackblack9432]

Can't go wrong with Bikemans. The adjustability and quality make the cost alittle easier swallow.

[@JasonCaville]

Price is crazy but I’ll only need the one set instead of three!

[@alancall5113]

great pro tips Keep the shiny side up

[@JasonCaville]

Thanks 👍

[@meyerstyle]

Good instructions and step by step. Curious why you didn't use new springs per the kit instructions? Next time maybe show the secondary clutch spring change process too!

[@JasonCaville]

I only purchased the Snypr Weight kit, not the Stage 1 Kit with the springs. I may buy the springs in the future. Thanks for the comment!

[@Fatonzzz]

So on your more recent rides, what did you end up holding for rpm? I seen where you said 8400. Have you noticed a change in off the start response? I'm considering just going with 74g or even 76g OEM, if I can find them. I ride some of the same areas as you, but mine is a 165, albeit the series 8 and not the series 9.

[@JasonCaville]

With the 74g I’m typically right at 8400 +/- 100rpm. Still has great throttle response. I’ll have to test the track speed on my next ride.

[@Fatonzzz]

@@JasonCaville Thanks!

[@Fatonzzz]

@@JasonCaville Did you ever test the track speed? I'm almost out of break in and have been revving 8600 at 6000ft. There's a lot of options and I'm heading out to Fernie again in a few days. I can either simply try a 140/310 SLP primary spring for $60. I could spend $180 for Polaris 74 or 76g weights, then have them be wrong and have to spend more money later. Finally, I can fork up the $550 for the Bikeman Stage 1 kit or $750 for the ibexx kit. Season is dwindling, and it's been a spendy year for sled gear and home renos, so trying to be "savvy" lol.

[@JasonCaville]

@Fatonzzz 8600 at 6000 ft is pretty good. What temp was that at? I might have lost a tiny bit of response with the 74g but I could experiment with the magnet placement. I have mostly heel weight at the moment. Just one magnet at the tip. I haven’t tested tested track speed

[@Fatonzzz]

@@JasonCaville That was in Vale and it was pretty cold actually. I think it ranged -12 to -18 at the bottom on those three days. Did you gain rpm when you came out of break-in?

[@mudman6227]

I think you got an email from polaris for updates on 2025 snowcheck 😂

[@JasonCaville]

Yep it’s for a 9R Boost! 😜

[@christinecaville8539]

Oh ya, what’s in the Polaris bag🤔

[@JasonCaville]

What could it be??

[@christinecaville8539]

Stickers

[@JasonCaville]

@@christinecaville8539 yes, in several of the letters previous to this package!!

[@billygoat7c]

came here for the clutch shield install, good vid!

[@JasonCaville]

Glad you found the video! The shield was a pain to put back in at first, but after I pinched the metal clips back together the 1/4 turns latch easily now

[@Rideflylaugh]

Better change out those Handle Bar Hooks!..😆

[@JasonCaville]

👏👏Maybe I’ll throw them on my e-bike 😂