Polaris Axys and Matryx clutch alignment DIY

[@mikesmith6717]

Probably more info than I needed but well done! Thank you.

[@jasondavis3658]

This is extremely helpful! Thanks for putting this together!!!

[@mountainsleddergarage8627]

Thanks, just trying to help people understand and be able to maintain their sleds.

[@RandallWendt]

Thanks guys you blessed me with a very informative video !!

[@mountainsleddergarage8627]

Glad it was helpful

[@mountainsleddergarage8627]

Glad it was helpful

[@gregoryr1995]

Well done! This is good info and relatively simple for anybody that would like to save some belts and get better performance out of your machine! Also Tony @ TRS = 👍

[@richardmaxwell1433]

Thanks, the TRS stuff is very good

[@mountainsleddergarage8627]

Call Tony at 307-272-5884

[@TheIrongutz]

Secondary clutch is meant to float on the shaft, it will align automatically when the belt is installed.

[@Rickydbaby]

Trs actually sells adjustable motor mounts to correct the lead in to get you as close to 0 lead in as possible.

[@mountainsleddergarage8627]

Yes they do, I made a video about the TRS motor mounts last season. If your lead in is off by very much the only way to correct it is machine the stock mounts or buy the TRS mounts.

[@mountainsleddergarage8627]

The video is called TRS motor mount DIY, in the axys/matryx section of my videos.

[@DIYWilly]

Would this alignment process be the same for a RZR 900? I’m installing an Chevy Ecotec with a XP1000 turbo clutch. I’m having trouble getting all the alignment s figured out like back spacing and lead in. Any help you can offer would be fantastic. Will the tool you show help me on a RZR? Thanks for this video!!

[@fireniceperformance]

Outstanding video!

[@mountainsleddergarage8627]

Thanks, you guys have great profucts

[@fireniceperformance]

@@mountainsleddergarage8627 Thank you . Where are you based out of? Would love to collaborate, and get some product on your sled/channel.

[@mountainsleddergarage8627]

I’m in Salt Lake City. Thought about reaching out to you when I saw you reply the first time. Just message me through Facebook or Instagram gram

[@MortenBreiset]

Hi, good video👍 is it the same lineup bar for 2024 boost also?

[@mountainsleddergarage8627]

Alignment is the same on all the axys and matryx sleds. TRS originally made the bar for the p-85 clutch, but that orginal bar didnt work on the p-22 clutch. The newset TRS bar works of both the p-85 and P-22 clutches.

[@nombr]

Another good informative video!

[@mountainsleddergarage8627]

Thanks.!

[@yamahawolverine466]

Very well done video. Thanks!

[@mountainsleddergarage8627]

Thanks for the comments!

[@markristau1783]

You’re video was great learned a lot. I have a 2006 Polaris 340 classic with P85 clutch, removed the motor rebuilt it put it back in the sled and the clutch is not lining up with the driven clutch. I have read the repair manual, cannot find a toque adjustment bolt, nor will the motor mount plate move. Question is how or what is the specs. For the clutch alignment?

[@stephrace]

Thank's, good video

[@machine7767]

Great video, I bought the TRS alignment bar and am in the process of aligning the clutches. Was curious about the belt deflection adjustment screw. Won't the adjustment screw effect the position of the outer sheave? Should the belt deflection screw be turned all the way out for alignment? Or should the belt deflection be set properly for the initial alignment and a re-alignment done every so often after adjusting the belt deflection during the season?

[@jasonfeger2308]

The adjuster moves the inner sheave outer doesn’t move

[@terrysmith8133]

this is the only video i see that has the specs for the clutch. the other videos show deflection only which is only is small part of clutch performance.

[@mountainsleddergarage8627]

The specs I give are the TRS performance specs

[@Nytrorider18]

Extremely helpful!! Thank you so much!!

[@Jerrodplanck]

Are the alignment tools interchangeable? I bought one through Polaris and can’t get to fit inside the housing

[@mountainsleddergarage8627]

No, unfortunately, they are all designed a little different. You need to find the specs for your specific tool in order to use it properly

[@dcheynerl]

This work for p22

[@mountainsleddergarage8627]

Yes, there is a new alignment bar that works for the p-85 and p-22

[@kristianfury8270]

Do you have part number for all spacers uses in this video?

[@mountainsleddergarage8627]

Part numbers are at the 12 minute mark in the video

[@mountainsleddergarage8627]

And also the 16:40 mark for the float washer part numbers

[@mrgoggles1963]

Looking for the alignment bar for my switchback proS 800. Do you have an email address for TRS by chance? I don’t have twitter or other social media and want to contact them via email. Thank you. Great video, by the way.

[@broadwayline]

Where can I find the TRS bar? Can’t find it on Google

[@mountainsleddergarage8627]

Sorry for the very late reply. TRS performance on Facebook is the easiest.

[@jonasstrandelin3628]

What do you mean with 30000 of float? How man inches is that?

[@mountainsleddergarage8627]

.030

[@jonasstrandelin3628]

@@mountainsleddergarage8627 tnx! Great video!

[@PatriotBrad]

Is this valid for mountain and trail sleds? Does polaris change specs for the two different applications?

[@richardmaxwell1433]

Honestly, I don't work on any trail sleds, we just don't have them out west. I will say, the TRS alignment bar does it a little different than the Polaris specs, mush tighter tolerances.

[@Rokonroller]

Excellent information! Thanks 🙏🏻

[@mountainsleddergarage8627]

Thanks!