Polaris Pulse Bar

How the Polaris pulse bar works.
#polaris #pulsebar

[@FreedomIsntFree2023]

Picked up a '24 RZR and learning a ton about this as I am adding several accessories. Here is some random info, I didn't even think to look into....fuses. This car has several different types of fuses; Primary Fuse Center (under the center arm rest) uses various MCASE fuses, with a 200A ZCASE fuse on the cable feeding the Pulse Bar. At the Pulse Bar, that 40A fuse is a JCASE fuse for direct protection on that bar. The switched ignition on the Pulse Bar has a 10A mini blade fuse which can be found in the Secondary Fuse Center next to the drivers knee; this is the "TERM BLK" fuse. Who in the world carries around these types of fuses, should one blow?? Now I do.....

[@donfilippo2052]

I like what you did here, but could you show me how to add the 5 prong rocker switch with the relay, and pulse bar. I am over thinking this cause I cant get it to work. Thanks Don

[@sherlockthepug6745]

Very well explained.. nice workbench also😁

[@LoneWolfOverland]

thin im just getting an auxbeam when I add lights, having to buy a relay and an inline fuses when they are pre installed. and mounting it in a easier to get to location. The new 24 XP RZR its mounted in such a crap spot, and now I ahve a windshield installed, so roof has to come off to remove windshield, then the dash panel, and its mounted opposite of where you can see it.

[@Mr97dodgeram]

I got some questions on this I’d like to ask trying to wire in a pulse bar and relays now

[@UberHaas]

You also may need a relay depending on the pulse relay style. If the constant power is always on (key on or off) a relay is needed to prevent un-wanted power consumption.

[@carjensen]

They need PulseBar Plugs that have the relay attached directly as one plug. no need for connecting wires,

[@jeremihachey4449]

Hey man, I have a 2024 RZR 1000xp with a light bar baja style that has 2 relays on the harness what do I do in this case to wire up these Amazon plugs on are pulse bar. Thanks :)

[@158burton1]

Sounds like it's a multipurpose light bar with multiple triggers. The instructions for the light bar should identify what the trigger should be for each relay.