POLARIS RXLs 650 X2 BARN FIND WILL THEY RUN

[@triplehelper6944]

I sure wish you or nutter where my neighbors. I’d have fun with you guys. Nice sleds

[@toddclyne3493]

Bring the beer 😁

[@ronwitt1]

Great job. I herd you say no snow. Really bad year. Was alittle in the U.P. but its almost gone. Traffic was insane. Well its not over yet. Think snow.

[@toddclyne3493]

I believe it can still happen. The biggest problem is the lakes are becoming unsafe

[@chadbarton3235]

Great video guys. I love the way those RXLs sound. I like the look of the traditional, POLARIS, on the bar pad. I'm sure whatever you decide on will look great.

[@toddclyne3493]

I was thinking just the model

[@rotax700]

On the bar pads you could put the name of each build so they would all be slightly more unique and also suited to the sled it’s on

[@toddclyne3493]

Good point

[@Sean-i4r]

Todd i'm in vermont we've had No days below zero and right now in the valleys , we have no snow unless you go up in the mountains

[@toddclyne3493]

I feel your pain

[@craiggowsell8798]

How about “inside out” for the handlebar pad with a Polaris symbol.

[@toddclyne3493]

😂😂😂

[@gregmcnamara9229]

Lots of progress this winter great work!! The efi 650 really does sound like a clean burning engine. I dont see many in my area but they are around.

[@toddclyne3493]

Thank you very much!

[@GonnaSendIt4256]

They all look and sound great cant wait to see the next video

[@toddclyne3493]

Thanks

[@oshork646]

Nothing says 90’s like a purple headlight cover! Perfect!!!

[@toddclyne3493]

😆😆 I know right

[@shanegridley4922]

Polaris logo on the bar pad

[@toddclyne3493]

Right on

[@shawnbuckendahl1968]

2 Bag turned out beautiful. Nice job on the injector cleaning. Put the sled names on the bar pads. We just got a foot of concrete come down in the last 6 hours.

[@toddclyne3493]

Taylor Bordelan has been sending me pictures 😁

[@matthewenerson2095]

Can you imagine how much Polaris paid their R&D plus graphics team back in the day….. Just so you guys can come along and show them what they should have built??? Or should still be building….

[@toddclyne3493]

😂😂 I know right

[@brianwilber4347]

Another great job, wish you had snow to enjoy them!

[@MarketplaceMark]

Would be cool to have your graphics lady make remakes of the snow check stickers. This sled built for 2 bag, this sled built for Parts sled and so forth. You get the idea. Great work as always, I enjoy your videos.

[@toddclyne3493]

I still have my dash plaque from when I snow checked my 94 XLT 😁

[@tca375]

When I was struggling with my father gave me tip.Aftwr I had mangled the screw completely.Got out a baby set of channel locks.Instantly broke those stubborn screws loose.

[@toddclyne3493]

Your father is a wise man 😁

[@jeffalleshouse9783]

Todd n trenton ther all works of art love seeing oldys are the goodys !!!!

[@toddclyne3493]

Thanks

[@mountaincat2001]

Todd clyne, i honestly would trim the bar pad with either purple or pink "polaris" from corporate logo.

[@toddclyne3493]

I like it

[@dubiousf00d]

Thats exactly what i was thinking

[@mountaincat2001]

Todd clyne also. I wanted to know if you use a ultrasonic machine And what you recommend as far as machine..i want to buy one and i trust your opinion. Btw Drink a busch for me... thanks

[@borealmetalworx]

I was typing Wedge as the name for the bar pads when you said it, no bullshit so funny. Oh ya what a cool finish filling the shop with 2-Stroke smoke, I could smell it here in Ontario lol

[@toddclyne3493]

😂😂

[@chadkohler793]

Stock pipe 650s just sound amazing. On the CR 125 bars, do the cables still fit well? I like a small rise and straighter bars and this looks about right.

[@toddclyne3493]

Yes with the bars and a 1 inch block all is good. In total about 3.5 inches rise and a couple inches forward

[@terryzig]

Dude , I cant believe how clean those RXL's are.

[@toddclyne3493]

That's why we had to fix um 😁

[@Seasidelive]

These 2 rxl 650 sounds like a plan..unreal no snow 🌨 🌨 we got some up north atlantic coast maybe till early March..

[@toddclyne3493]

Send some our way

[@Jakefromstatefarmtv]

I actually was just about to put a led in mine, not going to anymore lol

[@toddclyne3493]

Yeah it's not worth the hassle

[@bigmurph1447]

Sleds look awesome Its been a shitty winter for everyone

[@toddclyne3493]

It sucks 😂

[@jeffcarine9108]

Beautiful builds again guy’s awesome work

[@toddclyne3493]

Thank you my friend. Sorry about the butchering of the names.

[@chrismunger9736]

LOVE LOVE LOVE The sound of those stock RXL's 👍

[@toddclyne3493]

Awesome sound

[@chrismunger9736]

@@toddclyne3493 Best sounding stock pipe ever i think! Good job!

[@borealmetalworx]

Well done once again Boyz. Awesome to hear them fire up.

[@toddclyne3493]

It was a bit of a struggle on them 😁

[@jeffnicks2128]

beautiful sleds! just add snow now they sound sweet

[@toddclyne3493]

Thanks but I'm mowing the lawn this week 😆😆

[@otahu26]

Put the Name of the Sled on the Bar pads. :) Like Two fingers, Parts, 3 Fingers. etc. Would be cool.

[@toddclyne3493]

I like it!

[@dubiousf00d]

That headlight cover was the cherry on top for that XLT. Looks perfect. Glad your keeping the triple song strong!🔥🍻. I haven't even started my sleds this year. Its sad

[@toddclyne3493]

The no snow thing sucks

[@ryanbenbow-zx2sd]

​@@toddclyne3493I Got one ride in this year in boon Michigan. The Only thing. That made me mad was trying to get to the store. For gas. So.I.had to go to.mesic Michigan to get gas. Then on my way back home . I got pulled over for a broken tail light

[@snostm]

Where can a fellow purchase those beautiful bar pads ?

[@toddclyne3493]

Nathan Kinney

[@victoriaracco8726]

Sled name on the bar pads would look mint !! Oh I sold my skidoo mountain sled and got me a mint triple

[@toddclyne3493]

Awesome

[@1997.xc.triple]

Whare do you find the headlight covers for the wedges

[@toddclyne3493]

Not easy. Just gotta watch the for sale adds

[@raymonddancer9181]

Thunda na na na na na na Thunda..! Dammmmm that's awesome

[@toddclyne3493]

😂😂 awesome!!

[@matthewbegin3462]

Love that two bag, great build!!

[@toddclyne3493]

😁

[@mountaincat2001]

Todd clyne can you make a video on how to clean,sync carbs and choke pretty please

[@Welcometofacsistube]

On the bar pad, how about " triple life " or "triples or bust"

[@toddclyne3493]

😂😂 love it

[@troymodin1682]

I think indy and the model. Because if you put what you name them?? What if you sell and someone wants to name it something else?? Keep up the great work buddy 👍

[@toddclyne3493]

The few I have sold that are named the new owners kept the name and love um 😁. I do like your idea

[@jamesguralski5156]

Nice XLT build! I always wanted an ultra! Greasy triple

[@airman6822]

Great work as usual guys! Love, love that Ultra! Definitely time for a couple beverages! Cheers!

[@toddclyne3493]

Yes it is time to tip a few back 🍻🍻😁

[@garrettfriend4772]

Hey Todd are you guys going to plain on going like out of state. To find snow ❄ cause you guys don't have any to at least ride once this year........!

[@toddclyne3493]

No plans

[@jeffreypatton3321]

Triple powered on the handle bar pad

[@toddclyne3493]

🤔 now you're onto something

[@tomchalette1509]

Just an idea. You should put the names of each sled on the.and under the names. The dates that you built the sled 🍻

[@toddclyne3493]

Great idea

[@Z-Bart]

Polaris: First on the freedom trail.

[@toddclyne3493]

😁

[@Sean-i4r]

Your daughter's sled is so sick,nice,very very nice build

[@toddclyne3493]

Thanks so much

[@scottstrecker9867]

Sleds are all looking great 👍

[@toddclyne3493]

Thanks bud

[@jeffpine3036]

The custom color rope guide's are pretty cool. Back then, the starter rope would rub a track in the plastic guide. And there goes starter rope which you have to remove starter and fish rope out. My solution back then was Polaris earliest design. Which was just a steel loop for the starter rope and where the bolts mount to chaincase and key choke area. I saw the design I believe on your leaf spring triple.

[@toddclyne3493]

We have aluminum guides on a few of our sleds

[@matthewenerson2095]

Fuel won’t burn correctly unless it’s atomized. Definitely something there.

[@toddclyne3493]

I truly feel that's the case. They both start in one pull every time now

[@jerrodforsythe5189]

Hey brother put the names off the sleds on the bar pads just a suggestion keep rocking

[@toddclyne3493]

Thanks man

[@andyceranski6823]

Man there’s something about that parts sled. What a machine she is!

[@toddclyne3493]

Thanks 😁

[@Ricksrides1969]

Do you have a video or info on the triple swap om the gen2? I have a 99.5 xcr440 roller that needs an engine.

[@duffman1241]

Todd you need a impact screw driver that you hit with a hammer I love mine not the vice grip!!

[@toddclyne3493]

I know but everyone owns a vise grip 😂

[@jasonarnhold1841]

I know it’s probably against your religion, but arctic cat makes bars just like those with the had warmer built into the tubes, just a thought

[@toddclyne3493]

I'm not sure I could do that 😂

[@lesterburritt2038]

There all beautiful. Go old school todd. Have polairs put on them

[@toddclyne3493]

Love it

[@jeremymullen5378]

🔥sled build name on bar pad that be cool 🔥👊🔥⚠️🏍⚙️🔨that ultra sure looks sick guyz

[@toddclyne3493]

Thanks

[@billreichheld4839]

Awesome sleds guys no snow in most of Ontario either crappy year!

[@toddclyne3493]

Sure is

[@HellboundKZ750]

Put the names of the sleds on the bar pads its something i haven’t personally seen done yet

[@toddclyne3493]

👍

[@williamparrish712]

I like wedged out wedged out

[@toddclyne3493]

😁

[@willsgarage2092]

American flag on bar pad maybe it's an idea. Thanks for the videos guys 🍻 cheers

[@toddclyne3493]

Thanks for the idea 🍻

[@calcobb442]

M U S I C...love those triples by Polaris

[@toddclyne3493]

Its addicting 😁

[@abandanation1000]

i found sea foam works really good on bike ones

[@toddclyne3493]

Right on

[@Sean-i4r]

For the handlebar pads , I think maybe just polaris symbolnot the word polaris , but just the symbolsomething small simple , not overdone , but yet it is still a call out

[@toddclyne3493]

Right on

[@96formula670]

I think the name of the sled on the bar pad would be really neat

[@toddclyne3493]

10 4

[@kevinandres5053]

You learnt something from nutter Clean the Injectors!!!

[@toddclyne3493]

Well as I said I don't think the injectors had anything to do with our start up issues or theirs

[@brandonj6860]

Hey how much would you charge to make one of ur race cans for a 96 Polaris Indy 500

[@toddclyne3493]

I don't

[@angiehernandez7349]

Was my pleasure guys! Headlight Looks awesome!

[@toddclyne3493]

Thank you so much! ♥️

[@angiehernandez7349]

@@toddclyne3493 ❤️

[@markroussel7337]

SPX WEDGE on the bar pad

[@toddclyne3493]

You nailed it

[@mjbruno5233]

Music to my ears.

[@toddclyne3493]

👂😂

[@martinrobarge3246]

Triple loven bar pad

[@toddclyne3493]

That one hasn't come up yet 😁

[@just_in_time5518]

Vice grips never fail! 😂😎

[@toddclyne3493]

😂

[@glennsprague8767]

Sled name on the bar pad👍

[@toddclyne3493]

Got it

[@bradhitchcock3980]

I was thinking (Clyne special) with an American flag for a bar pad logo👍🏻

[@toddclyne3493]

Or Custom by Clyne 😁

[@bradhitchcock3980]

@@toddclyne3493 I like it,but you need that flag in there to. Not enough American pride anymore,and we see your a true American with that Freedom sled you built.

[@IndyGuyRob]

Great video guys! Those RXL’s are sounding great! What’s the plan for them? Did you end up using any of the EFI stuff I sent you? No idea if it worked lol I see you have another RXL in the shop? What’s the plan for it? Sell it to Nutter, he’s looking for one maybe? lol 2 bag and Parts sled are just simply gorgeous sled guys! Great work!!! My vote for the pad is your “Rat Fink” avatar symbol you have on your channel, with Clyne’s Customs underneath 🤷🏻‍♂️ Or maybe, “Get off the nipple, get on a triple!” lol Cheers guys 🍻🍻🍻

[@toddclyne3493]

Yes I used all of the parts you sent. Thanks again for that. I love your bar pad suggestions. Probably keeping them. The extra one in the shop is just that extra parts 😁

[@IndyGuyRob]

Ok, glad to hear they got put to good use 👍 Was worried I just gave you a box of junk lol You guys are going to need a bigger storage garage! lol

[@ScottMartin-y8i]

Awesome sleds guys!! Name of sleds

[@toddclyne3493]

👍

[@joshlee1514]

Birthday of first fire up on each bar pad

[@toddclyne3493]

Oh man I would have to do some thinking then. But I love like it😁

[@tboystoys5682]

Put their nick names on the bar pads with your logo you need a cartoon character done up of you and Trenton tastefully though. You guys need a logo

[@toddclyne3493]

Great idea

[@alanvincent1615]

I can smell the end of that one

[@toddclyne3493]

Very smoky. 4 new engines 😁

[@TAXACHUSETTSFUMMINS]

Stop taunting me with Parts Sled. 😂

[@toddclyne3493]

😂😂

[@drewkuntz2174]

I never cared for the looks of a Gen 2, until 2 bag.

[@toddclyne3493]

😁

[@SeveryXLX]

Hey bro, I think your bar pad should just say SPX! That is an Spx yeah?

[@toddclyne3493]

Yes it is. I like the idea

[@GeorgeTidquist]

G-TRIP

[@waults]

Bar pads should promo your KZbin channel.

[@toddclyne3493]

😁

[@stephanelanglois6140]

i crack a beer for you’re sucess 🍺🍺🍺🍺🍺🍺🍺🍺🍺🍺🍺🍺🍺🍺🍺🍺🍺🍺🍺👌👌

[@toddclyne3493]

Rock on!

[@brandonj6860]

And ship it

[@north6481]

Bar pads decal ….. greasy triple

[@toddclyne3493]

😁

[@ironeagleyt6331]

Put your daughters name on bar pad

[@toddclyne3493]

😁

[@denniskemnitz3771]

Your daughters name. Maybe 😊

[@toddclyne3493]

Right on

[@williamjesse8357]

How about 650 triple on the handle bar with a flame under it !

[@toddclyne3493]

Good idea