Polaris Sportsman starter bendix replacement

[@jcjobin]

Awesome video man. My pull start all of a sudden seized on me, opened it up and the pull start assembly broke, in the meantime, I looked at the bendix and realized that the teeth were completely worn down! Sounded a lot like 0:20. Thanks again.

[@minnesotakid1327]

Excellent video, straight to the point. Thank you!

[@noneckjoe948]

Put a new starter in mine and still doesn’t start; must be the bendix .. your video was very helpful... thanks for sharing...

[@badas95Z]

Was it your bendix?

[@samp5057]

Well? Was it?

[@noneckjoe948]

@@samp5057 yes

[@RichardJones-us1xl]

Thanks man great video gotta do mine 👍

[@edbrisket8800]

Good job chief😊

[@reindeersafaricom]

Thanks bro. Regards from Lapland

[@MartineduardoRC]

thanks for the vid, the flywheel in 700, you have too taken off for sure if you want take apart the bendix.

[@josephdestefano7377]

THANKS FOR THE INFO !

[@itstheoz1]

i put a new bendix on mine and you still cant start it as soon as it fires starter revs up old and new drives do the same thing any idea's

[@peteranderson2575]

Thanks for this video!!!

[@justinjohnson7236]

My starter is bad. I’ve got the replacement and a new bendix I got with it. It looks like the starter comes out the other side. Would it be easier to install the starter from the other side with that cover and bendix our or does it need to be in place in order to put the new starter in? Just trying to save myself some work as other videos show the starter being a bit of a pain to get the bolts started and stuff

[@jonhatfield5459]

You got a part number on the bushins you replaced?

[@marcidillabough3331]

does the flywheel need to come off on a polaris 700 sportsman to remove the bendex?

[@tazzharm]

Hi was wondering i just checked mine as it's making a lot of noise , new one ordered do you put any agl or oil in the case to lube the gears?

[@mlevi512]

Tazzharm No I didn't. Mine was noisy before changing also and I found that the bushings that hold the bendix were worn causing the noise.

[@escudeiro14]

Por favor, você sabe me informar os números de engrenagens do bendix do polaris sportman 500??

[@clintonblackwell8304]

Hey man can u help me I have a new stater and bendix but the bandix is just spinning won't engage can u help me

[@Devo1987]

canthat bad bendix cause the pull start from not retracting ?

[@mlevi512]

No, the bendix is only related to the electric start. Check out your recoil assembly.

[@Devo1987]

@@mlevi512 I just changed it out with a new one everything moves freely I did have water get inside the cover I got to clean that

[@mlevi512]

I can't say for sure on a 700...500's do not need to be taken off.

[@hectorrojas9310]

Me puede mandar el diagrama de todo lo que va en esa parte donde esta desarmando

[@tazzharm]

Ok thanks I posted vids of the noise mine made Bushings will be changed later and see if it's better Check out my three vids and tell me if same or worse Thanks

[@ericmassey5423]

Would have been nice if you showed us it started good after all of that.

[@mlevi512]

Well I guess you'll have to take my word, it started good.

[@michaelkaylor6770]

Probably not a 5/16, more like 8mm...

[@mlevi512]

Michael Kaylor how boring is your life that you feel the need to nitpick a video like this? Go away.

[@acutt5512]

5/16 and 8mm are interchangable, onle a few thousands difference

[@acutt5512]

@@mlevi512 thanks for this video, my wifes 450 is doing the same thing, thought i had to pull the whole starter and am glad i found this video! Should I put a dab of grease in the bushing holes?

[@mlevi512]

@@acutt5512 I did on mine. They had a slight amount of play and with just a touch of grease they felt better.

[@acutt5512]

@@mlevi512 thanks man, ordering one today, didnt see the caltrix though, got a link?

[@The_Native_wolfAK]

Isn’t this similar to a trailboss 330?

[@michaelslaney620]

Have any one removed the bushings for the bendix and if so how did you achieve that to install new ones