Policar Vintage F1 Tune Session

[@richardlange9094]

the flashing lights in the viewing stands is neat

[@Area51racewayNC]

Thanks

[@_Dave_S]

I bought a pair of the March 701 cars a couple of years ago but haven't touched them yet. This video is a great guide, so now I won't feel so apprehensive about opening them up lol. They are the only F1 cars I have in my collection, so I am not used to working such delicate chassis. Thanks for posting!

[@Area51racewayNC]

Yeah they are a car that requires patience but once you get them tuned they are a lot of fun.

[@slotcardude68]

I like the hints in your video, usefull and easy!

[@johnstezelecki8157]

I love these cars. We race them in our club. I have to admit that placing the body back onto the chassis is something I really dislike to do. Especially the Lotus.

[@Area51racewayNC]

It is pretty tough to do

[@modelracecar]

I have a March 701...don't expect to be able to wrench on these in a hurry on race night just before your race heat 🥵 The stock rear tyres are actually great on wood. To make life a little easier I fit a pair of Policar alloys on the rear but changed the tyres to NSR Ultras (not Evo), you'll need to drill a small hole through the tyre for the allen key. Glued & trued tyres front & rear, round the corners on the rear tyres and a bit of ballast either side of the pod pivot. These won't compete with NSR or Scaleauto F1's but they're superb for a class of a specific era i.e. 1966-71 inclusive.

[@Area51racewayNC]

Thanks for the info!!

[@SlotCarDojo]

I'm starting to tune some now, great info here. I still can't find Emerson Fittapaldis car.

[@ratfink6670]

Great tutorial video on setting up the Lotus. Regarding the front motor screws. There are 2 screws in line in the center. Are both screws necessary or can just 1 be used in either the front or the hole closest to the pod? When I viewed the set up video for the Ferrari 126C, the hole farthest from the pod was used and the one closest to the pod was left empty. But, when I look at Andy Rowlands instruction for his 3D printed conversion kits, he uses the hole closest to the pod and instructs the farthest one from the pod be cut off. Your thoughts....

[@Area51racewayNC]

It is what works best for you. I would experiment and see which one is better to remove or keep. You tune the car for your track.

[@richardlange9094]

What kind of switch did you use to trigger the flashing lights in the grand stand?

[@Area51racewayNC]

Its a infra red sensor

[@patrick59]

Hello, can you put the subtitles so that they can be translated. Thank you.

[@Area51racewayNC]

Subtitles will appear after 24 hours after it is loaded up. You should be able to see some now.

[@patrick59]

@@Area51racewayNC Not yet, but I'll wait. Thanks for your feedback.

[@skewwer]

Great tuning tips. I've just bought the ronnie peterson lotus. I dont know if i have the patience to deal with putting the body back on