Polini maxi hi speed 9 rollers Vespa hpe 300 GTS

Polini maxi hi speed 9 rollers Vespa hpe 300 GTS
In the video, you will see the installation of the Polini Maxi High Speed variator on the Vespa GTS 300 HPE.
Vespa GTS 300 Polini variator rollers type dr Pulley changing: • Vespa GTS 300 Polini v...
Open variator box Vespa GTS 300 hpe racing sixties: • Polini maxi hi speed 9...
Unboxing the variator Polini maxi hi speed 9 rolls • Polini maxi hi speed 9...
You will also see a test of the variator of the Vespa GTS 300 HPE. • Polini maxi hi speed 9...
Insert a Polini spring into the clutch of the Vespa HPE 300. • Polini maxi hi speed 9...
Variation test Polini maxi speed 9 rolls placed in Vespa GTS 300 hpe racing sixties • Polini maxi hi speed 9...
I installed the same variator a few months ago in my old Vespa GTS 300 and I was very pleased with the acceleration and power.
#vespa #HPE #polini

[@Murat1982turkey]

Hi, do you think it is necessary to change your poly for Vespa gts 250? What is the difference between it and the original? Will it cause problems in the future? I've done 30,000 km now. I changed the variator, but after 6 months, the sounds come immediately. Do you think your poly would be better?

[@fitness-fishing-s.kovachev]

For vespa gts 250 Polini maxi hi speed with various need to be with 9.2 g rollers. Acceleration is better than original varoator.

[@junxrare]

Polini HS9R + Malossi Clutch + Torque Spring Malossi = Rocket Bunny

[@mototrend7668]

Харесва ми меракът с който искаш да го вдигнеш на задна гума :) На прав път си, опитвай с 5-6км по висока скорост и дърпай по силно с повече задържане на газта :)

[@fitness-fishing-s.kovachev]

Ще опитам :)

[@jkkosm2965]

Did it make a lot difference from stock? I am thinking for Beverly 300 2009 does it give only better acceleration or both acceleration and top speed?? Thank you !

[@fitness-fishing-s.kovachev]

Acceleration is greatly improved, you can see other videos on my channel where I drag race other vespa gts 300, honda sh300 and Yamaha Tmax. The maximum speed, if it is electronically limited, does not change, if it is not, it increases by about 10 km/h Greetings!

[@ConnyGriebel]

Super gemacht

[@fitness-fishing-s.kovachev]

Danke!

[@alikemalyetuk]

Merhaba 2023 model gts300üm var ve debriyaj bölümünü komple malossi yaptım fark olmadı . Bir bilgin var mı ?

[@fitness-fishing-s.kovachev]

Merhaba arkadash, Silindir ağırlıklarını düşürmeyi deneyebilirsiniz. Daha yüksek bir hız istiyorsanız biraz daha ağır, daha hızlı bir başlangıç ​​istiyorsanız daha hafif koyun.

[@user-bl3db2el8k]

Alikemal bey son aşamada ne yaptınız değişiklikler işe yaradımı

[@alikemalyetuk]

@@user-bl3db2el8k komple orijinale geri döndüm malossi parçalarıda sattım bagaları 16gr olarak takmıştım 14gr taksaydım belki kalkışı iyi olurdu ama parasını hak edecek kadar iyi değil . Malossi parçalar ne zaman alınır onu söyliyeyim orjinal parçanın ömrü bitince .

[@marinbozic8391]

I put the same vario on my x9250, but i have a problem. RPM goes in sky. Scooter has a good start but it goes around 80kmh and rpm keep on going but scooter does not increase speed. Can you help me?

[@fitness-fishing-s.kovachev]

Check that the belt is not worn. Did you install the spring in the clutch that is included in the Polini kit? What brand and model is the scooter? For me, the Vespa reaches 130 km / h quickly

[@marinbozic8391]

@@fitness-fishing-s.kovachev Yes, i did instal the spring from original pack. It is an piaggio x9 250 engine. You think that worn belt can couse that,

[@fitness-fishing-s.kovachev]

@@marinbozic8391 Yes, it probably is, but clean the friction surfaces well with the clutch sandpaper and see if the clutch bell is accidentally blue (overheated).

[@marinbozic8391]

@@fitness-fishing-s.kovachev Clutch bell is blue as sky. You think it is sliping?

[@fitness-fishing-s.kovachev]

@@marinbozic8391 Yes, clutch and clutch bell maybe is damage

[@fabiengougaud5565]

So, is Polini Maxi High Speed 9 rollers good? Feel the difference? Is it worth the investment?

[@fitness-fishing-s.kovachev]

Hello, before I bought the Polini High Maxi Speed 9 rollers variator, I did a lot of research specifically for the Vespa GTS 300 hpe, which is the best choice of variator. Whether to choose Malosi Multivar, Jay Costa or someone else. Almost all opinions such as maximum power and efficiency and endurance pointed to Polini's variator. Definitely worth the investment, the change is tangible. I just want to say that I have tried before with Dr. Pulley's sliders of 12 and 13 g. They have an effect, but the variator is the best solution for tuning the Vespa GTS 300 HPE.

[@fabiengougaud5565]

@@fitness-fishing-s.kovachev thank you for your response. Fuel economy has changed?

[@fitness-fishing-s.kovachev]

@@fabiengougaud5565 Yes, 3,4l/100 km is consumption. The cost increased by about 0.3-0.2l per 100 km

[@lordfuneke2350]

My 2013 Vespa 300 Super Sport reaches 130 on it's top speed with stock exhaust, cylinder and clutch, i wonder if getting full kit polini would make any difference, I'm tired of being overtaken for trashy Susuki's swifts on the highway Lol

[@fitness-fishing-s.kovachev]

Until recently, I also had Vespa GTS 300 2012. This Polini Maxi Hi speed variator was mounted on it. Before I sold it, I dismantled it and put it on my new Vespa HPE 300. I made the measurements of the old Vespa GTS as I had previously with the Dr. Pulley Slider. Gave me about 2 seconds on fast scars with Polini varomatik. I have now ordered heavy rolls of 10.1g for Polini vario. It is currently 9.2 g rolls. But according to the scooter west, 10.1 g is more suitable for GTS 300.

[@Menzoooo]

Was für Rollen hast du genommen? Wie viel Gramm?

[@fitness-fishing-s.kovachev]

Die Rollen sind im Satz des Polini Variators für Vespa GTS 300 9 g enthalten.

[@fitness-fishing-s.kovachev]

Ich habe das Gewicht der Brötchen geändert und ein Video gedreht. Ich hoffe, dass ich es bald verarbeiten und teilen kann. Ich habe schwerere Rollen.

[@aliyurdakul1]

Top speed is it changed a bit ?

[@fitness-fishing-s.kovachev]

Yes, 10km in old GTS. In Hpe 138 and engine stoped working in the limit. Abs sensor count how many revs making wheels.

[@aliyurdakul1]

@@fitness-fishing-s.kovachev so if you change the abs ring for the kubler tonrad then it goes almost 150 km/h😱

[@Ma6roshi23]

This model isnt old, why is the engine all rusted ?

[@fitness-fishing-s.kovachev]

Poor build quality is the answer. Piaggio Vespas don't pay attention to these things... The bike is only 2 years old...

[@Panthers1521]

Living by the ocean takes a big toll on them.

[@rolandhellermann9404]

Alles andere als proffessionel! Alleine das Zerlegen der Kupplung mit dem 46er Gabelschlüssel - ein Graus! 😢😢😢

[@fitness-fishing-s.kovachev]

Der Punkt ist, dass die Arbeit getan ist und man Freude an der selbst geleisteten Arbeit hat, aber man würde es kaum verstehen.