Polishing porcelain tile surface bullnose

[@tommylay6390]

Great video! Very direct and helpful, thank you.

[@arrowheadtileandstone8973]

Thanks!

[@sl5311]

What number did you set the grinder on? Thanks for the awesome video!

[@arrowheadtileandstone8973]

@@sl5311 usually right around three or four on the Makita variable speed.

[@alec1113]

True porcelain tile is the same colour throughout the tile and surface , the tile you're using has the same colour glaze as the body (glazed porcelain ). This means that if it chips, there is less chance of seeing it compared to light body porcelain and dark surface glaze. Thank you for the video.

[@chapothakid5080]

Not really round but yea..

[@Dazmpower]

Very good video and really helpful

[@rdy4trvl]

Great demo. Just a question on the bullnose - this would seem to work great where the tile surface and porcelain are the same color - like your gray example (very nice) but I'd guess it might not always turn out as nice as yours did. Something to keep in mind when selecting tiles.

[@user-jx2zz4lb5d]

Great and to the point video, what speed setting/rpm on the grinder are you using?

[@arrowheadtileandstone8973]

For these dry pads I usually stay around setting three or four which is about 6800 to 7800 RPM I believe. Keep it around level two (4000 RPM) for the profile wheel. I’ll double check the RPMs when I get back to the trailer later.

[@user-jx2zz4lb5d]

@@arrowheadtileandstone8973 i appreciate the response mate.

[@georgeb9651]

Great job, where do you get the p egg ofile wheel. The big box stores did not have them.

[@arrowheadtileandstone8973]

Amazon has them if you don’t have a local Dal Tile or Tom Duffy.

[@k80kay]

Will this attach and work on a ryobi angle grinder?

[@arrowheadtileandstone8973]

Yep it should attach to any angle grinder. The only thing you’ll want to make sure is that it is a variable speed. Technically you could use it with a standard grinder but it’s dangerous and spinning too fast. I’ve used it on standard grinders in the past but it is super risky and not supposed to at that high of RPM

[@davidw9025]

Very helpful. What, no eye protection?

[@shanemacintyre3200]

Nice!

[@mattmason7554]

Awesome information.

[@ninaalexa6163]

What brand is the profile wheel your using

[@arrowheadtileandstone8973]

Alpha, from Dal Tile

[@ninaalexa6163]

Dal tile doesn't sell this I'm in Michigan. Is there a link u can send me so I can purchase off Amazon or something

[@arrowheadtileandstone8973]

accuglidesaws.com/p/alpha-profiler-b-series-b5/?gclid=CjwKCAjwieuGBhAsEiwA1Ly_neQgcCXfBPvs7U1PQB36MfjcGx4etioZIrMq0xyVdxeYBqBhgeHRKxoCWWkQAvD_BwE

[@arrowheadtileandstone8973]

www.amazon.com/s?k=3%2F16”+bullnose+profile+wheel&ref=nb_sb_noss

[@arrowheadtileandstone8973]

I don’t see the Alpha on Amazon but one of those other ones will work they just won’t last as long.

[@ninaalexa6163]

Ok, thank you

[@bruce6364]

You Da Man

[@arrowheadtileandstone8973]

👍

[@LeoSal]

Could you list the equipment used?

[@arrowheadtileandstone8973]

5 inch Makita SJS variable speed grinder, 3/16” stone profile wheel, 400 grit dry polishing pad and 800 grit dry polishing pads with Velcro backer. Most Dal-Tile sand Tom Duffy carry the pads/etc. Home Depot online has the best deal for the grinder.

[@Charlieant2887]

Do you recommend doing this on shiny porcelain tiles?? Looking options for stairs when they dont come with bullnose..

[@arrowheadtileandstone8973]

Yep absolutely, you’ll need to Go up to a 1500 or possibly even 3000 grit dry pad if you’re really wanting to make it shiny.

[@caseyjeremy1602]

I know im randomly asking but does someone know of a trick to get back into an instagram account..? I stupidly forgot the password. I would appreciate any help you can offer me!

[@lianbenton9174]

@Casey Jeremy instablaster :)

[@caseyjeremy1602]

@Lian Benton Thanks so much for your reply. I got to the site on google and Im in the hacking process atm. Seems to take quite some time so I will reply here later when my account password hopefully is recovered.

[@caseyjeremy1602]

@Lian Benton it worked and I now got access to my account again. I'm so happy:D Thank you so much you really help me out!

[@oddopops1327]

👍👍😉

[@VictorLamme]

and then suddenly it appears to be Jesse Pinkman with a whole new career ;-)

[@tomnapper101]

doesn't look like it bullnose to me a better of with full router 👍

[@arrowheadtileandstone8973]

You should make a video and post it, I’d love to see how you do it 👍

[@tomnapper101]

@@arrowheadtileandstone8973 old stone mason from London I dun lots of bullnose on Portland Stone York stone l limestone at end doing porcelain I would use a vanity blade top bottom on porcelain i make like a make a wedgie shape put full router on it padd it down 120 git 220 git 320 git finish it off I' no a little bit about it I wasn't criticizing I was just want to help 👍

[@arrowheadtileandstone8973]

Oh for sure! I wasn’t offended :) always ready to learn and improve

[@rintutileswork5191]

I want this product so plz address

[@arrowheadtileandstone8973]

Go down to Nina’s comment. The info should be in her comments

[@robinbuchan6233]

no face mask no hand protection no eye protection it's likely he will need arm protection