Pool Slide MAKEOVER! How to Paint a Pool Slide.

What should you use when painting a pool slide? We'll answer that question today as we re-paint a pool slide which has been stained from use over the past five years. This video is sponsored by Trimaco
🛠TOOLS USED IN VIDEO⚒
Graco Handheld Sprayer: t.ly/cBhR
Game Changing Tools: t.ly/kszs
Airless sprayer equipment: t.ly/RnsC
Masking tools & products: paintlifesupply.com
Paint Life Apparel: t.ly/GBYj
Music: bensound.com/royalty-free-music
👀ABOUT CHRIS 👀
I started The Idaho Painter KZbin channel as a way to help out others who were trying to paint themselves. I have a passion for painting and helping other people to fall in love with painting. My primary focus is to educate, empower, and equip painters word wide. Hope you enjoy our channel.
📌Due to factors beyond the control of The Idaho Painter (or Chris Berry and the Paint Life crew), We cannot guarantee against improper use or unauthorized modifications of this information. The Idaho Painter and Paint Life assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. The Idaho Painter recommends safe practices when working on any structure and or with tools seen or implied in this video. Due to factors beyond the control of The Idaho Painter, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from use or improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not The Idaho Painter.
Joshua 1:9

[@Here-2-Learn]

Just a little extra info for anyone painting around a pool. Years ago I was spraying further away from the pool than you were the overspray floated on to the water filter picked it all up plugged up cost me over $300 . Now I always cover the whole pool . Lots of pools in so cal

[@gwenkaiser6836]

If the fiberglass is showing through how do you fix it?

[@adventurousx8220]

I have the same slide I went to home Depot and bought the clear acrylic gloss paint in a can, sprayed it on and it's lasted me 6 years ...you just put it over the old paint it works like a charm, so slippery. cost me $14$

[@mrg865]

For small jobs the handheld Graco is great. I have the Ultimate MX which can spray hot solvents. Like the fact that you can use the FFLP tips. Does takes about five or so rinses to get it thoroughly clean.

[@cyberpunk4622]

I can honestly say I never painted a pool slide, but I painted David Hasselhoff's tennis court back in the day :)

[@johnguilbert1349]

Michael, LOOK OUT!

[@jemielhaider454]

Looks wicked

[@scottm4042]

I have not painted a slide before, but the early morning may also have less wind. Nice colors!

[@deacadeind]

I have the same exact slide and I've used CLR for the rust and then used Marine boat bottom paint. Great video and keep em coming.

[@Idahopainter]

Johhny fox good tip

[@charlesfrey660]

Great work, love that graco , why didnt you start at top and work down? worked out great anyway. Well done

[@sergiocorona5776]

Saludos de puebla gracias por la enseñanza no les entiendo pero si aprendo lo que veo

[@crazydupdup9735]

Hi, i'm about to paint mine, so what is the final verdict, does it do a good job? does it slides well? thanks

[@kylewatanabe8171]

Where do you get the multi-surface acrylic paint from? Is it premade or do you have them mix in the color you want?

[@jasonbrace9439]

I just painted my slide yesterday. Should I put any polish on it or does it slide fine with just the paint.

[@dancagle2533]

West Marine Fiberglas boat paint.

[@RFC1997]

Can this paint be used on cinderblock?

[@gasonly5340]

Did y'all sand it? Or was that paint allow to just.respray and go to spraying without sanding? Nice work eitherway

[@CCPW_chicago]

Doesn't over-spray get on everything that's uncovered (bushes, concrete pad where the wind carries, ect)? That's the reason I haven't sprayed anything outdoors... Let me know thank you!!

[@chadrockman1762]

Great job Iove multisurface acrylic...looks like you layed down a primer first? If so what did you use? Strong video keep them coming👍

[@Idahopainter]

Chad Rockman Not a primer. I paint blue then decided I wanted pink.

[@johnguilbert1349]

You guys should check out the Sherwin Williams "Polane" line of products for things that need an extremely durable, chemical and abrasion resistant and long lasting high performance coating. These are catalyzed products and provide a bullet proof finish. Sprays like a dream via HVLP The 2 products I used primarily in the past are: POLANE HS Plus Polyurethane Enamel Works great on a variety of substrates, the high solids has a great look I used to use it primarily to re-finish counter-tops and fiberglass tubs Counter tops Formica: scuff sand with 100 grit we-dry sandpaper, wipe down surface with laquor thinner Cultured Marble or fiberglass: Scuff sand with a scotch-brite, wipe down surface with laquor thinner Polane® B Polyurethane Enamel Works great on a variety of substrates, I used to use it primarily to re-finish porcelain tubs (acid washed first)

[@teamswanson1]

From Florida- You guys could work everyday here! No when paints slides!! What brand of Multi Surface Acrylic Gloss did you use? I am doing this!!!!!!

[@SkyroofNova72]

I had same issue at multiple paint stores not knowing what to use. Please do a post season update on the project, even a one or more year update to show how it holds up. You've hit on a big subject here in the south where most homes have pools!

[@Idahopainter]

SkyroofNova72 this is my slide and I have painted it MSA and APE and both hold up great

[@scottyboy2400]

@@Idahopainter - PLEASE let me know where to buy some at? Ever which one you liked the best? Need either white or aqua colored. Just got a new pool liner that's carribean colored instead of the ocean looking blue. - Help me out and I will sub and tell the fam and friends to do the same! Thx from Pensacola, FL!

[@Kevincheesepizza]

Is there something you guys dont paint Chris! That's so cool! Are you hiring?

[@Dented_Battle_Armor]

If a fibreglass is submerged in chlorinated swimming pool or salt chlorinated water, what kind of paint should i use? Will multi surface acrylic work as well?

[@theminecraftkid1057]

I paint mine last week😂

[@scottyboy2400]

Can anyone please tell me where to get the all surface enamel and the multi-surface acrylic? Maybe in white or Aqua color? Thx!

[@Fundoracarpentry]

Question:for spraying pre cat lacquer a respirator mask with the 6002 filter cartridges will be good enough or Do i need an special one,I heard it is very toxic,thank you

[@Idahopainter]

NES specialist use charcoal respirators

[@kylegoodman5196]

Do a new pool painting video with epoxy paint! Also interesting call on the MSA. I might have specced another Pro Industrial product, the Pre Catalyzed Water Based Urethane for the UV resistance or maybe even Water Based Acrolon 100 as an absolute best option, but MSA seems to work just fine!

[@Idahopainter]

Kyle Goodman good tips

[@steveosmonson6535]

Feedback on the Graco handheld, does it clean well, and provide consistent performance? Which model did you go with? I know the higher priced ones are supposed to be able and handle different coatings. Thanks for your feedback and the videos!

[@Shadow61616]

I have the top grade one and they are great for small projects, on this slide you’d have to refill too many times to even make it worth it. I’d just use a small pump with a short hose instead.

[@steveosmonson6535]

Thanks

[@Idahopainter]

Steve Osmonson it’s good for small projects only

[@mss1227]

Just wondering why you didn't use gel coat? My 40+ year old slide (same one you have) only needs an occasional buff to return the shine.

[@angelatovell7178]

What kind did you use?

[@mss1227]

@@angelatovell7178 Wet sanded it first, then went to the local boat shop and got an oxydation remover for fiberglass boats. A mild one so as not to remove to much as it is an old slide. I use a cheap buffer, but not an orbital, you need higher RPM's from Harbor Freight. It's all I use it for.

[@mgrantom]

Definitely use a gel coat if you want the best surface possible. You will need to fine sand it and then polish it but it will be a much more permanent solution. Painting will only last a few years at most. Gel coat is much more difficult to work with, but if used it is the best way to go.

[@angelatovell7178]

What brand of gel coat do you use?

[@racefilter2254]

Can u record up close when u paint something because you do it from a distance and can’t even see any details.

[@Idahopainter]

RaceFilter will do

[@dawn8601]

Do you have to spray it on? Can i hand paint it?

[@Idahopainter]

You can brush it

[@joeschool4724]

Don't make it hard, if it doesn't need fiber glass repair, buy dolphinite gel coat spray paint cans. You don't have to buy the spray equipment, buy excess expensive gel coat, mix colors or deal with clean up. They'll even mix custom colors into the cans, and you can custom the paint job, so if it's just a spot, or you want to do the channel, have at it.

[@timmoore8767]

Do you have any experience with using dolphinite? I have been trying to reach them, but I cannot seem to reach anybody.

[@lynnegarman5406]

@@timmoore8767 me too! Trying to find how much each spray can will cover

[@daddydiamondhandz7527]

Who sells this paint

[@DesertPacificUSA]

Dolphinite's website says: We are experiencing unprecedented shortage in some of the materials needed to make ANY OF OUR GEL-COAT COLORS. WE REGRET AND ARE FRUSTRATED THAT WE CANNOT MAKE ANY OF OUR PRODUCTS AT THIS TIME. We will add the colors back to our website once we can supply it again.

[@wouldntbelieveifishowyouanyway]

Airplane paint

[@PoolEnvy]

No PPE for me lol.

[@lhanso20]

I’d use swimming pool paint, 2 part epoxy

[@Idahopainter]

Awesome, thanks for sharing!

[@leilarodriguez7362]

What product would you use to paint a waterslide with constant water flow? And can withstand freezing temperatures?

[@agent7agent759]

I would've use scuffx from Benjamin Moore

[@rickylach]

Not trying to be a smart ass here, at all. Just a question really. Did you guys consider a boat gel coat/fibreglass speciffic enamel. These are made for fibreglass, while being able to withstand water !! This product you used, will not last !!! I know you have a business to run, but you do not want a call for a waranty issue !!!

[@maverick-zj3jz]

knee pads will save u from getting your knees replaced please start wearing them.

[@jonathandeans6874]

Chris send me the tools you don’t want or need anymore

[@jengutierrez8451]

What paint did you use? Our slide is in desperate need of need paint.

[@Idahopainter]

Multi surface acrylic🤙

[@timc524]

Everyone has same question please BRAND?

[@rosemarykullman4614]

What were you thinking painting that slide pink? Ugly, Ugly, Ugly

[@matthewcox6140]

Great job. Terrible color.