Poor Man Power Steering - Lawn Mower Garden Tractor - John Deere MTD Husqvarna Craftsman Cub Cadet

Here is an easy way to do a HOW TO Poor Man's Power Steering for your Riding Lawn Mower or Garden Tractor. This project didn't take long at all, but in the end it's all worth it and works awesome.
I did it with basic tools and if your "Shafts" column is clean, it's under 15 minutes at most. Just be careful after though, because it works a little differently and if people are not used to it, they can fall off on sharp turns.
Hole = 20MM = 3/4" (ID)
Outside Dia = 35MM = 1.37" (OD)
Thickness = 2MM = .07"
COMPLETE SET + BEARING PURCHASE LINK: amzn.to/3qTKf1h
I found it even cheaper.... SEE THE 10 set for only $11.99 (October 2020 Prices) - That means it's EVEN CHEAPER and only $1.19 Per Tractor.
***** Link to 10 (5) Sets Part $11.16: www.amazon.com...
***** Link to 2 (1) Set Part $5.99 Sale & $6.74 Regular Price: www.amazon.com...
***** Link to 10 Sets Part $11.99: www.amazon.com...
NOTE: If you find my video on Amazon. I gave 1 Permission Usage to Linqing Zhonghai Precision Bearing Manufacture. I'm NOT associated with the Sellers !!!
----

[@JodBronson]

*COMPLETE SET + BEARING PURCHASE LINK:* amzn.to/3qTKf1h *NOTE:* Pause the video @ 1:22 - You will see *The Wonder Bracelet.* That bracelet there changed my life and YES, I invented it myself. *Let me change your Life and Health FOR FREE.* YES, I am the inventor of it and I gave it to the world FOR FREE !!! I believe that "Health" should be free. In early 2021, I released something called The Wonder Bracelets. *LINK #1:* See how things work: kzbin.info/www/bejne/povTgX97q9N1qpI *LINK #2:* The EASY Wonder Bracelets DIY: kzbin.info/www/bejne/l6Gphn2ci8ainK8 *LINK #3:* Follow The Wonder Bracelets Playlist below, so you can learn ALL about it and ALL its benefits, my discoveries and how things work: kzbin.info/www/bejne/anzHhGmopsuop68

[@MrB337yla]

I was wondering what that was

[@JodBronson]

@@MrB337yla - *Want to mow your lawn ALL DAY without getting tired? I have invented something that will MAKE YOU YOUNG AGAIN + REVERSE AGING !!! See this video... We can talk after....* kzbin.info/www/bejne/roeUlp-ojaqShJY

[@pauldouglass2897]

That link it was $15 for the "KIt"

[@JodBronson]

@@pauldouglass2897 - October 2020 Prices

[@patrickbodine1300]

It took literally 10 minutes to do the job. But it took 10 more minutes to find that flying e-clip.

[@yurmabeechaudits3522]

A pair of 'channel-lock' pliers are the best to reinstall the 'c-clip'.

[@Farm_fab]

Jordan, to prevent the c clip from flying, put a rag over it while removing it.

[@tractortinkerer11]

Good tutorial on the thrust bearings. One thing I do is put some marine grease on the bearings between the thrush washers and that helps greatly. Good job.

[@martinwilliams1085]

Update: Installed the bearing and washers. Works real well! You really notice the difference. Lets see if lasts a long time. Thanks!

[@JodBronson]

It all depends on the environment and usage. You don't think it's worth the money for fewer hassles and ease of use?

[@mikel3612]

Just installed east install works great

[@tomkearns6830]

I have a 2015 Super Bronco Troy Bilt GT. It is the 50-inch mower model. I drive it on a rough, rolling pasture area that I turned into lawn. Making the turns at the end of a row cut is a bear. I found your You Tube video of adding washers and roller bearings to improve the steering interesting and a solution. The question is where do I find the bearings and washers? I was unable to find a bearing kit on Amazon that was specifically made for a Troy Bilt GT. I then studied the parts diagram of TB’s spindles. They are a little bit different than others. Per the diagram they do not seem to have a lip on the bottom and the spindle maybe too short after adding the extra washers and bearing. However, the diagram may not be detailed enough but I am hesitant to take the spindle apart to determine their construction without bearings and washers in hand. Do you know where I can purchase very thin bearings and thin washers to make a custom kit? I would appreciate any help would be appreciated

[@JodBronson]

Measurements would be ideal. The search for the bearings and make sure it fits. Anything is possible!

[@bluecollardadventures2338]

this is a great idea - good video and very thorough detailed instructions - thank you!

[@JodBronson]

You're very welcome!

[@tomkearns6830]

Would these parts work on a 2018 Troy Bilt Super Bronco? Will these the bearings/washers fit? Thanks

[@JodBronson]

See the measurements in the description and you will know!

[@philliphall5198]

This is the kind of stuff I like to see not everyone trying to convince us there real mechanic and just watching them handle wrench’s tells it like it is

[@salybarra9315]

IS LIKE HAVING POWER STEERING

[@jimwilson4043]

he stole this video from another guy, I watched the original

[@JodBronson]

*YES, I stole it and made it better !!!*

[@Chevy-Guy]

LMAO Those are called thrust bearings.

[@JodBronson]

Put those around your wee wee... It will be a wee wee ring!

[@JodBronson]

Then you get FREE THRUST !!! 😂❤️😂❤️😂❤️😂❤️

[@leebradley2179]

Installed these on my rider 2 weeks ago,works great

[@JodBronson]

Awesome!

[@philliphall5198]

These really help young folks and folks that are pretty heavy Really they should come on all mowers I think but it’s a easy to install them

[@jtt1989]

Thanks Jordan. I’m going to try this. Hopefully it will help prevent my steering gear (pinion and quadrant gear) teeth from wearing out every two years by putting less of a load on them because of friction.

[@JodBronson]

YES, it will help for sure !!! You will like it, I promise! Also, when you grease the Steering Colum/ Knuckle, it actually spit out old grease and push the dirt out for you too. It's a tip I should've put in video or even make a new video just for that. YES, that was my favorite part of doing this actually.

[@jtt1989]

Thanks Buddy.

[@JodBronson]

@@jtt1989 - You are welcome!

[@pjmazar4533]

Great Idea and good video. I would love to do that to my Wheel Horse but there is not enough room for the bearing without grinding away enough material to be able to re-install the E-clip. Fortunately, my larger Power King tractor came with thrust bearing already installed. Thanks for the video.

[@M.TTT.]

Gonna be doing this on my simplicity 3310V, the steering got much harder after installing a snow plow for the first time.

[@donaldprichard692]

my cub cadet is made differently, so I wasn't able to attempt this project. Thanks for posting, though.

[@jasonmeyers9413]

Couldn't you just add grease and it would help it turn better instead of using the washers

[@JodBronson]

Give it a try and see! LMFAO

[@MustangsTrainsMowers]

Toro 5xi tractors have 1” steering spindles, 260 series have I believe 7/8” spindles. Toro just couldn’t make things simpler and use the same size spindles and front wheels on both the 260 series and 5xi.

[@Ssups101]

Not a "C" clip my man, it's an "E" clip, good knowledge on the roller bearings! Another upgrade to do to my JD. Thanks!!

[@JodBronson]

C or E is fine! THEY BOTH WILL FIT!

[@carlthornton3076]

Very Good!... #84 🐄🦉🏴‍☠✝{5-6-2022}

[@williamdillingham5781]

A heat gun is a much better choice of heat for that job

[@JodBronson]

Yea, it would. What if you are in an old barn WITHOUT Electricity and about 200 feet away from the main House??? I guess you can plug the Heat Gun into your arse for electricity, right? 😆😅🤣😂😂🤣😅

[@harleybill1306]

Annoying...........

[@JodBronson]

*Yea, I am "annoying" to bii pooo laaa people and I LOVE IT !!! Tell me something that I don't know! LMFAO* 😆😅🤣😂

[@Bigeoutdoors6]

Glad I ran across this video thank you for making it I just did this upgrade to my Husqvarna 354d and yes it does make a difference

[@JodBronson]

Glad it helped

[@truetech4158]

I might try this on a tiny electric car that is about to be shipped in 10 days. Very affordable groovy simple solution with those thin bearings. Way less than having to have a electric motor and a sensor. Keep on rolling, when you rock,

[@JodBronson]

Good luck!

[@PapaMav]

I have lost my bearings and need you to help me find them....Good vid, thank you ! Worth a try.

[@JodBronson]

Link in Description + Pinned Post!

[@Mixwell1983]

Just got the bearings in from Amazon and tomorrow at work (Lowes) I am going to pickup grease and install them on my Husqvarna yth2246. 👍

[@JodBronson]

Good luck!

[@watcherwatchmen7785]

If your tractor doesn't have the grease nipple, you can drill and tap a hole and install a grease fitting from the hardware store. Cast iron is easy to drill and tap. Just make sure to clean the hole out well and blast it with compressed air before screwing in the nipple. On a side note: A couple major manufacturers have eliminated the grease fittings on their weed wacker heads as well, so you can't grease them. You can drill and tap the aluminum housing for a zirc fitting on those too, but you're going to want to drill a tiny weep hole so excess grease can find a way out.

[@JodBronson]

Good tip !!!

[@rontaylor7362]

Thanks got mine ordered that is going to be much better.

[@mattcurtright5861]

Tried it. Cant tell a difference... disappointed 😢

[@tadeuszmichaelwlodarczyk3120]

Excellent 👌👍 video. BUT CHANGE YOUR TYRES THEY GOT (SPLITS)

[@JodBronson]

It got tubes!

[@kirtshives6138]

Fine job ! Very informative

[@gus7523]

Think this would be an issue if mower is 4 wheel steer? I'm wondering if the back wheels would turn out of sync with the front rotating faster.

[@JodBronson]

*GO TO SCHOOL AND YOU WILL SEE HOW THINGS BEHAVE !!!*

[@kennynickell9883]

Instead of using a torch I use a hair dryer to soften rubber and MUCH safer than a torch..as for using gear oil I will still force grease into that bearing before setting into place..

[@JodBronson]

*I use what I got my nigga !!!*

[@franciscosanchez4932]

Muchas gracias. Viejo, me. Sirvió de mucho 🤘🤘🙋‍♂️ Thanks a lot men

[@trudyburns86]

Excellent job, Lewis

[@geraldtownsend9647]

Hey Jordan, I clicked on the link you included but the DEEG bearings and washer set are unavailable, any suggestions?

[@JodBronson]

Check Description !!!

[@philliphall5198]

I’m going to order 5 set and try to use them on friends mowers

[@ThomasJoseph315]

Appreciate the video! I ordered these bearings and they will be here tomorrow. I have a bad arm and this will make driving the mower much much easier! :)

[@JodBronson]

You are welcome!

[@gilbertjaramillo8735]

Super nice informative video. I will do that on my yth v2246 mower.

[@JodBronson]

Glad it helped

[@herrtauso6489]

Many thanks

[@011CJ]

5.99 I can do that lol thanks for the vid and link

[@JodBronson]

You are welcome!

[@thurm101]

Just ordered. Cant want to put in on.

[@williammunday3279]

Great video Thanks

[@karguy1720]

None of the bearing sizes shown in the Amazon link match the dimensions shown in your description.

[@JodBronson]

20mmx35mmx2mm

[@agodwin2011]

Great video is that just for one wheel or both.Does it work for Troy Bilt Mowers to..

[@JodBronson]

For BOTH. It will work on any wheels 3/4" Shaft. EVERYTHING in the description.

[@Robthebengalguy]

You did a nice job that's pretty cool it turns your riding lawn mower into a power steering nice video

[@JodBronson]

Yes, thanks

[@cornfusedatbest3980]

My 1999 JD Sabre 1542 is welded so you would have to cut them off. My main concern is the steering has become very hard to steer. I can't seem to find very much info on this particular tractor. My guess is the problem is in the gear - buried under the gas tank. Time to start tearing it down, I just hope I still can get parts for it.

[@JodBronson]

Good luck !!!

[@gordbaker896]

1642

[@randyland1000]

Thanks 3:32

[@sheri023]

Thank you. I like that you demonstrate the ease of turning the wheel after you have put the roller kit on.

[@JodBronson]

Glad it was helpful!

[@JodBronson]

Go make *The Wonder Bracelets....* You can be out ALL DAY MOWING LAWN + MORE ENERGY too. See this video below and YES, I am the inventor and gave it to the world for free !!! kzbin.info/www/bejne/roeUlp-ojaqShJY

[@williamodom2698]

It would be great if you did a video on the steering staff also.

[@JodBronson]

Don't you need extra people to make "Steering Staff" ??? LMFAO

[@williamodom2698]

Damn auto correct LOL

[@Comm0ut]

"Wafer bearings" are easy to source. Good idea.

[@JodBronson]

Yes they are!

[@sodbuster518able]

Looks like that front end hardly ever seen grease

[@JodBronson]

Did you see how much in the cap? LOL

[@Marvinfj32]

At least the cap was well lubricated.

[@yogibeer9319]

Awesome video! Thanks for the links too!

[@JodBronson]

You bet!

[@larryblood6481]

Nice video, helped me out alot. Thank you 👍

[@JodBronson]

You are welcome!

[@MrShankspony]

What a great idea thank you so much

[@JodBronson]

You are welcome!

[@Farmalleric]

What a cool idea I'm gonna try it on mine

[@JodBronson]

Let me know how it goes!

[@rhondakendrick2563]

THANK U FOR THE INFO😀😀😀😀😀

[@JodBronson]

You are welcome!

[@Bakin]

Thanks for this video; how long do these bearings last before they need to be replaced? I'm asking as I assume sand and grit will get into the bearings during normal use and will erode the bearings over time.

[@JodBronson]

The one in the videos is still on there and it's the 2nd season. Surprisingly, I thought it would be we would have to replace it every season, but it's still good so far. I guess depends on your usage. We do these on a 2-acre lot, and we use it lots. We even use it for leaf transport in fall too, that is even more than mowing. *NOTE:* During each season, you would add grease to it. This will push out the old grease and the new grease will replace its place. Also, grease it extra and let it ooze out, that would be the protection for sand and dirt until your next grease job.

[@Bakin]

Thanks for the update. Seems like a successful upgrade. I’ll give it a try.

[@JodBronson]

@@Bakin - You are welcome. In my personal opinion, I'm glad I did it. My gram loves it because she is old and it's really easy to turn for her. She said sometimes the yard messed up during snow/winter plow and it made things easier for her to maneuver.

[@easyrider4649]

You explained the whole process very well ! Since you did this 2 years ago, how often you had to replace the bearing set since you made this video ???

[@JodBronson]

It's still on there & I greased it 4X so far. The trick is... Anytime you see lots of sand or gunk, you have to grease it.

[@easyrider4649]

@@JodBronson .. You talking about attaching the grease gun to the nipple or what ever you call that and put grease in it that away ? Like you did in the video at very end.

[@JodBronson]

@@easyrider4649 - YES, that is correct!

[@easyrider4649]

@@JodBronson .. I figured you were talking about the grease gun. I wend ahead and installed the bearing and washer kit. The riding mower turns so much easier now.. No more sore arms after mowing... :)

[@JodBronson]

@@easyrider4649 - YES, definitely make things a lot easier, that is for sure !!!

[@donaldprichard692]

I can't wait to try this! thank you!

[@JodBronson]

You are welcome!

[@MrB337yla]

Not even gonna lie this is probably the best mower mod out there thank you for sharing

[@JodBronson]

It made things a lot easier for sure. You can literally drive with one finger, LOL.

[@MrB337yla]

@@JodBronson yea I'm always complaining to my self as Im cutting grass how hard it is to turn this is an awesome solution thank you so much

[@JodBronson]

@@MrB337yla - Go make The Wonder Bracelets.... You can be out ALL DAY MOWING LAWN + MORE ENERGY too. See this video below and YES, I am the inventor and gave it to the world for free !!! kzbin.info/www/bejne/roeUlp-ojaqShJY

[@Farm_fab]

If you replace the steering ends with heim joints, like go karts have, it can improve the handling as well.

[@JodBronson]

Cheaper going this route.

[@joshmanis9860]

@@JodBronson go both and have luxurious steering and the heim joint steering is less prone to bending

[@JodBronson]

@@joshmanis9860 - So far my Steering Joints doing ok. Maybe that will be my next video when I do it and see how it goes.

[@Davidjb37721]

Thanks

[@JodBronson]

You are welcome!

[@rorna1930]

Jordan, thank you for the heads up on this. Can you tell me the Amazon item number for just the washers and bearings for an E100 Series Deere?

[@JodBronson]

There are a few links in the description, check it out.

[@xXxCrazyJay810xXx]

I lost my place what do I do ?? lol

[@JodBronson]

Huh?

[@xXxCrazyJay810xXx]

@@JodBronson Joke when you were adding gear oil you said dont lose your place lol

[@JodBronson]

@@xXxCrazyJay810xXx - :/

[@JRobert111111]

I looks like all the KZbin viewers have purchased all of these parts into oblivion. I can't find any available anywhere. And I would love to do the complete kit as listed here, but alas, it's not to be found.

[@JodBronson]

*CHECK DESCRIPTION!!!*

[@raymondjastrzab4715]

Jordan Where did you purchase these bearings for $5.99? Can't find that info anywhere in your video.

[@JodBronson]

*Check the Links in the description !!!*

[@McFordSuperDuty]

Good info brother!

[@JodBronson]

Go make The Wonder Bracelets and you can mower your lawn longer and more energy too. YES, I am the one the made the discoveries and the inventor of it and it has changed my life. *See this video below and there is a link in there for the DIY Bracelets too:* kzbin.info/www/bejne/roeUlp-ojaqShJY

[@robertbennett6418]

Just Recieved them today. Will install tomorrow. Probably don't need them but looks cool.

[@JodBronson]

Why bother if you don't need them?

[@robertbennett6418]

Cus I want too!!!

[@robertbennett6418]

Let me clarify. I don't need them as a steering assist but more to prevent wear/tear on that pivot point.

[@JodBronson]

@@robertbennett6418 - It will work for both !!!

[@robertbennett6418]

Installed them today. Does make a big difference. I like em.

[@jessjoshwyatt3571]

You should always dry off grease fittings. Why would I want to attract dirt thru a grease fitting? Great video tho, much appreciated 👍

[@JodBronson]

*You should always dry off grease fittings.*

[@Cornealious]

my right wheel doesnt clear to out the c pin back in on top but the other wheel is fine. Any idea why?

[@Cornealious]

Forgot to mention its a John Deere L120.

[@JodBronson]

@@Cornealious - Not sure what you mean :/.

[@Cornealious]

@@JodBronson On my right wheel, where the rubber cap you have to heat to get off, has a metal clip you have to slide off......when I put it back together after putting on the gear and washers I can't get that clip to slide back into place at the top. The washer at the top is covering the slide. The other wheel came out fine.

[@JodBronson]

@@Cornealious - Oh, I know. There isn't enough room for the E Clip to go back. The top has extra IRON on it when you put that back, there is no room. Take it back out and get a file and file it down. Also, try to file the bottom of it too, that should give you some room to get the E-Clip back on. *NOTE:* I think some of these are not engineered to the spec, that is why.

[@Cornealious]

I was gonna file it, but I thought maybe I was missing something cause the other wheel was tight but I got it in. Thanks.

[@chrisbeauchamp7812]

Where can i get these bearings &what is the part #

[@JodBronson]

Links + More ..... In the Description !!!

[@artwait7140]

I cannot find your link to the parts used ?

[@JodBronson]

I found even cheaper.... 10 set for only $11.16 (October 2020 Prices) - That means it's EVEN CHEAPER and only $1.12 Per Tractor. Link to 10 Sets Part $11.16: www.amazon.com/gp/product/B08FHTKK23/ Link to 2 Set Part $6.74 - $5.99 Sale: www.amazon.com/dp/B08FBK3D95 -

[@heikkiheykey]

you should drill some wee holes in the top raceway, then grease from the grease nipple can flow right to the needles in the new bearing. stay well..

[@JodBronson]

No need to do all that. Watch CLOSELY in the video where I am filling the grease, you will understand !!!

[@garyp9906]

I just put these on and hopefully they will last a long time. I did run into a problem. I have a Craftsman mower. I could not replace the one thick washer that I took off when disassembling because there was not enough room to put on the E-clip after I put it all back together. You have to remember that the bearings and the two washers that come with it take up room. It was about the same thickness as that washer I removed. Therefore, not enough room to get the E-Clip snapped on. Otherwise, seems pretty decent so far!! Thanks for a great video!!

[@JodBronson]

Someone had the same problem due to manufacture. You have to grind down the top a bit so the washers have enough room. Take a flat file, and file the TOP part of the shaft. From there, you will be good. NOTE: Read another comment from here, he had to do the same thing.

[@garyp9906]

@@JodBronson Thanks for your response, Jordan. That's a good idea. Let me ask you, though. Do you think it's important to put that washer back on? Or by me leaving it off, will it cause an issue in the future? I hate to take all that off again and file the shaft to make that washer fit. But I'll do it if you think it's necessary. Thanks again, Jordan!

[@JodBronson]

@@garyp9906 - If the E-Clip fits then it should be fine. On the other hand, if you hit a big bump, it may affect the E-Clip. If I were you, I will take my time out and file it, it doesn't take long at all. The manufacturer bought some knock-off stuff, that is why it's like that. This video was fine, but I did another John Deere I had to file it and that is how I knew what the manufacturer did. *NOTE:* You do not have to take everything apart.... Just raise enough to file and put the Washer + E-Clip back.

[@garyp9906]

@@JodBronson Thanks again, Jordan. Yeah, you're right. It probably would stay put, but over time from hitting bumps it probably would make that E-clip pop off. I might as well do it right if I've gone this far. I'll just pop off the E-Clip and washer and do it the right way. I guess I was looking for an easy way out. Thanks again for responding and I'll let you know how it works out!!

[@JodBronson]

@@garyp9906 - You are welcome! Make sure to grease it after and let it ooze out. Do not clean the extra oozing grease, and by doing that you are protecting dirt from entering those washers which will prolong usage. Next time to grease, clean off the old grease ooze, and then grease it until you see oozing again. You will understand this concept on your next greasing schedule.

[@Tigerfan50]

Where can I buy these bearings??

[@JodBronson]

Look in the description. Links and everything is in there !!!

[@mt1885]

Does this work on a John Deere D130 by chance -- ?? THANKS!

[@JodBronson]

*Your answer is in the video!*

[@bonose12]

My cub cadet xt1 appears to have the steering arm welded on top of the spindle after inserted through the I beam. I have no way to remove the spindle for your hack. Can anyone else confirm this plz? Nice mod though.

[@JodBronson]

They have special bearings for that to fit on top of those spindles. You can see it on eBay listing kit. *LINK:* www.ebay.com/itm/185736358968

[@bonose12]

@@JodBronson thx

[@75tomeks]

Good job👍

[@sgtjameslindsey2493]

Soooooooo, whats the idea of putting the grease in the top of the cap? Its not against anything that it could lubricate and there's no way for it to get into the shaft. The washer bearings on the bottom however is a great idea to cut down on friction. I'm wanting to put a larger steering wheel on mine, maybe at least a 16 inch. I think the stock 13 inch john deere uses is just too small and hard to turn.

[@JodBronson]

The word = PREVENTION

[@Michael-nl9sm]

I tried it on a John Deere LX188. The problem I had was the snap ring wouldn’t fit after the install.

[@JodBronson]

Some have to grind down a bit before you have room to fit. It's a Manufacture defect.

[@larrywitmer3394]

I had the same problem on on my john deere 185

[@wallyallyn5473]

Hey Jordan where do you get those kits like that to put on your riding lawn mower

[@JodBronson]

*I got those kits in the Description + Pinned Post. Check it out !!!* 😁😆😅🤣😂

[@martinwilliams1085]

Just ordered the parts!

[@JodBronson]

Go make *The Wonder Bracelets....* You can be out ALL DAY MOWING LAWN + MORE ENERGY too. See this video below and YES, I am the inventor and gave it to the world for free !!! kzbin.info/www/bejne/roeUlp-ojaqShJY

[@JodBronson]

@@charlesleake930 - It has changed my life and more !!!

[@carlfreeman795]

thought you said they were $5.99 all i saw was 19.99

[@JodBronson]

*Accusing + Accusing + Accusing... Is that how your world works? It would take you LESS than 3 seconds to see the LINKS IN THE DESCRIPTION. You will find it there!*

[@justmedontknowdoyou7860]

where did you find/buy tthe bearing set??

[@JodBronson]

*Check Pinned Post and Description !!!*

[@sladeoriginal]

You dont need heat to take the cap off. Just pry it off.

[@JodBronson]

*Can't, these are SOFT Caps.*

[@harrygmarshall5157]

Great idea!

[@JodBronson]

Glad you think so!

[@xXxCrazyJay810xXx]

Oh shit..... lol

[@3613jeremy]

I bet it helps the cheap steering systems last alot longer I'm hoping my troy bilt hydro 16 can do this

[@JodBronson]

All you have to do is measure the shaft and match it.

[@3613jeremy]

@@JodBronson ya unfortunately I wrecked on my bike and have knee surgery set up so everything is on hold right now my troy-bilt steers alright while moving but I'm hoping this will help at stand still turns

[@JodBronson]

@@3613jeremy - Sorry to hear that. It will help for sure!

[@gwbo3381]

Where u get these at

[@JodBronson]

Check Description!

[@swingblade1776]

Did this on a troybilt. It was easy to steer now its super easy

[@randythomas3478]

Gear grease

[@JodBronson]

Has to be Lithium Gear Lube/Grease because of Wet/Rain !!!

[@rogerkatakowski323]

Hair dryer

[@JodBronson]

*Nah... Hair dryer for hair! Try the REAL THING...... Heat Gun!* 😄😁😆😅🤣😂

[@JodBronson]

*After that, try your OCD Meds! Hope they work! LMFAO* 😆😅🤣😂

[@toasteroverdrive1097]

Can this mod be done on a regular MTD lawn tractor? Great vid, had not thougth about that mod.

[@JodBronson]

YES you can, it will fit just like in the video.

[@jimclaw3632]

tried a set, didn't help

[@realfast01]

By no means power steering what a waste of my time

[@JodBronson]

You are a waste of air! LOL

[@jimclaw3632]

I totally agree

[@rb.867]

Gear oils a lot thinner? LoL, 80 w 90 is not thin oil at all

[@JodBronson]

:( You have comprehension issues! I was comparing !!!

[@JodBronson]

Hahahahahahahaha...... Thank you for the laugh tho! LMFAO 😂❤️😂❤️😂❤️😂❤️😂❤️

[@JodBronson]

BTW... I was comparing the Heavy Duty Grease against 80W-90 Gear Oil. Did you even graduate high school? Hmmmmmm..... ??????? 😂❤️😂❤️😂❤️😂❤️😂❤️

[@eddiereams4997]

Where did you get your bearings

[@JodBronson]

Check Description !!!