Stihl MS661 vs Holzfforma G660 (same bar and chain)

FarmerTec G660 site:
www.huztl.net/...
Partea a doua a confruntarii, in lemn mai mai mare si cu muffler mod la ambele, aceeai sina si acelasi lant, pentru conditii cat mai egale.
Vorbind despre performanta, avand in vedere ca G660 este o copie chinezeasca dupa MS660, pot spune ca este impresionanta. Nu e ceva usor sa fii langa MS661C ca performanta, mai ales ca varianta M-Tronic a lui 661 este mai rapida decat cea cu carburator clasic.
Despre calitate pot spune ca nu satisface un impatimit al drujbelor, deocamdata nu sunt multumit de carburator, care face probleme, ceva normal la o chinezarie ==)))

[@joeborowy5794]

Perfect fit for my Echo CS-370, and the chain cuts very well kzbin.infoUgkxBd8qUztQUCL8Rm1-aIig5ViBT2E_kO_6 . I had been using a Stihl chain that I had sharpened several times (sometimes at a shop, sometimes with my own electric chain sharpener), and there's no comparison -- the new chain cuts much better and holds its edge longer. We'll see how the new chain holds up when it needs sharpening, but for now I'm happy.

[@AdrianBalanchainsaws]

Un paste linistit alaturi de cei dragi iti doresc colegu'!!!

[@mhtro5779]

Paște fericit și sărbători fericite! Și eu tai lemne chiar și mâine am

[@danielm1296]

Im a fan of Stihl after watching alot of videos im gonna purchase the holzfforma 660 for big jobs

[@poparamiro]

Thanks for watching! Must chamfer cylinder ports... Best regards!

[@petek6522]

That blue will work for me , home use for firewood, still keeping my 1991 044

[@poparamiro]

Thanks for watching!

Eu fac pauză acuma de sărbători ,in rest Stihl si Husqvarna always /Paște fericit tuturor respect celor ce avem nebunia ASTA cu drujbele o meserie de care mulți fug nu trag la ea numai bine big like four Ramiro si ptn chainsaws.

[@thefirewooddoctor]

Not much difference in cutting time, but the G660 is at least one-fourth the price of the MS661.

[@poparamiro]

True... Thanks for watching and all the best!

[@pinkysgarage2779]

Farmertec makes a fine product many guys take the G660 and right out of the box put it on an Alaskan chainsaw mill

[@poparamiro]

Yes, thanks for watching and all the best!

[@adrianlupu3316]

O copie china să țină piept la un MS 661 înseamnă mult.Au gîndito bine chinezi nus fraieri.Sărbători fericite și bucurie să ai Ramiro.

[@EugenTechTips]

Pana si la sunet se aseamana :D E o copie reusita ca si putere. :)

[@Mihu24]

Salutare, dragule. Am vazut ca au adus G660 , merita dati banii pe ea? La atat de multa experienta cata ai cu ele, cred ca esti cel mai in masura sa poti da un raspuns real...multumesc mult !!

[@poparamiro]

Doar daca ai chef de experimente... reparatii... Numai bine!

[@Mihu24]

@@poparamiro mulțumesc, deci mai bine pas...am deja o makita 7300 noua și un mcculloch promac 46ii. Eram curios ce inseamna 92cc .

[@fabricetopsecret]

La G660 elle consomme énormément !!!

[@poparamiro]

Must tune it Thanks for watching!

[@577buttfan]

Awesome video !!

[@poparamiro]

Thanks, all the best!

[@i1bike]

Greetings from croatia. I want to buy this chainsaw, but 90ccm is too much for me. I need it only to cut firewood. Do you know if there is any smaller holzfforma ? Maybe holzfforma with 50ccm or 60ccm and 3.2 or more hp. If there is, can you tell me which copy of stihl it is and the price. I am really interested, because here in croatia we work for 500 euros monthly, so i can not afford to buy expensive like echo, stihl or husqvarna

[@poparamiro]

Hi from Romania! I recommend G372xp or G444, both good and enough power...

[@i1bike]

@@poparamiro thank you very much my friend, i appreciate a lot your information. Can you tell me those saws, which copies of stihl they are, so i can buy parts from stihl when something breas.

[@leo23chivo]

@@i1bike G372 is a copy of Husqvarna 372xp and G444 is the a copy of Stihl MS440

[@i1bike]

@@leo23chivo god bless you my friend. I am just a newbie that doesnt want to make a mistake. Thnx a lot for your help

[@worldtera314]

E super holzfforma.

[@TheKing-pz6ni]

@arborcidal maniac 34

[@psavel274]

How is the huztl 660 holding up today??? Seriously considering grabbing one and replacing all the known failure prone stuff and modding it. Sure is a hell of a lot cheaper than an OEM 066/ 660. Thanks for the video!

[@poparamiro]

Holding ok... Love it, grest value for the money... Thanks for watching!

[@psavel274]

@@poparamiro Thanks for the quick reply. Did you get yours as a kit, or buy the powerhead already assembled??? I know there is a few parts that should be replaced with OEM Stihl stuff, just trying to get an idea. I'm thinking of pulling the trigger and getting one. Probably a better option longevity wise to buy the "kit" and assemble myself knowing that it's done correctly. I repair and modify saws for myself and for others, so it wouldn't be something "foreign" to me. What is your thoughts on this? Thanks.

[@poparamiro]

@@psavel274 i buyed the assembled one, change the spark plug , decomp, pull cord, fuel filter.... i think is a good ideea to buy the kit, a lot more fun also...

[@psavel274]

Thanks again bro... yeah I agree, the idea of assembling it myself seems like the way to go. Really no difference in pulling apart a non-running saw and putting a cylinder or piston/ rings in. Leaning towards the g444 because I love the 044/ 440. Its incredibly hard to find a good one that isn't smoked and in need of a rebuild anyways. Wonder if huztl or farmertec has them in stock currently? HL Supply is probably who I would try to purchase from. They have good customer service, and I would assume I would receive the kit faster this way rather than waiting for it to travel through customs from China. Thoughts?

[@psavel274]

@theykilledthegiggler Thanks for the reply dude! As much of a hardcore Stihl guy I am, I love me a few Husky's as well. Really considering between the Huztl 372 and the 660. I already own a bunch of great Stihl's and have also had the benefit of running and building a bunch of other kickass saws, but I feel like I need to own at least one of these china saws I can put through its paces. Any experience with these two saws in they're China form would be greatly appreciated! I'm going to check out some stuff on the Interwebz and see what I come up with.

[@chriswoods3188]

What's the difference between the 661 and 660?

[@poparamiro]

661 is faster and better design Thanks for watching!

[@iliecirciu8429]

Like 👍👍👍

[@habafganaka903]

Salut! Crezi ca daca faci un vs cu g660 muffler mode si ms 660 stock, g660 ar castiga?

[@poparamiro]

Salut! G660 cu muffler mod, reglat bine, e langa MS661 ca viteza, mult peste ms660 stoc...

[@habafganaka903]

@@poparamiro mulțumesc mult! Nu credeam ca exista cineva sa raspunda asa repede... eu sunt un pasionat de drujbe si cand vad comunitatea drujbelor in romania raman placut surprins=) foarte tare ceea ce faci! Mulțumesc mult pentru acest raspuns!

[@poparamiro]

@@habafganaka903 Multumesc si eu! Sunt cativa pasionati si aici....

[@charlesfinley1051]

Max engine speed on the g660 was set lower ... 1000 rpm I'd guess ... turn up RPM on G660 to the same as Stihl then no difference ... the ash tree was not all that much of a challenge ... the main difference was chain speed due to lower max RPM on G660

[@poparamiro]

~13000rpm on g660, ~13300rpm on g444 and ~ 12500rpm on g388

[@poparamiro]

@arborcidal maniac yeap, thanks for watching!

[@user-sb3no7or6y]

China vs germany yeah

[@phpalencia]

And what is the price between both?

[@poparamiro]

Big difference! Thanks for watching!

[@richherman4257]

phpr p stihl 661 is around $1,200-$1,300 depending on where you are and bar length and the g660 is about $500

[@erlanggasport]

👍👍👍🙏🙏🙏

[@poparamiro]

Best regards!

[@dorinionut5721]

E ceva pt o chinezeasca sa fie la o secundă si ceva distanta de un stihl =))

[@dorinionut5721]

@@poparamiro corect =)

[@janosvadas]

G660 doesn’t even sound like it’s tuned properly.

[@poparamiro]

It is ok, but the carb is unstable... They have bad carbs... Best regards!

[@louiseromero4577]

Need to sharpen the chains make it a lot easier on the saws

[@poparamiro]

Thanks for watching and comment!

[@rayraske5096]

You dulled the chain out on the first cut. Dogs on the logs. Let the saw do the work

[@poparamiro]

Thanks for watching!

[@rayraske5096]

I mean brutal as in I ve done tree work for 17 years. That's not how you run a saw

[@poparamiro]

@@rayraske5096 cutting for work is not the same with cutting for racing or testing...

[@Digby-Waddlebottom]

dude 661c is a pro saw more power, not a straight up comparison

[@jbbolts]

im pretty sure the 660 in this video is a knockoff chinese clone of the 661 so the comparison is legit

[@nathanr.8556]

Blake must be a fanboy

[@poparamiro]

Just for fun... Best regards!

[@user-du2qu6pd6e]

Τελεια ποσα κοστιζει για Κυπρο

[@poparamiro]

Thanks for watching!

[@buzzsaw301]

That even sounds like a stihl

[@poparamiro]

Thanks for watching!

[@alexludden6657]

That's a 5-10 year old design (661) vs an almost 30 year old design. (066) Not really apples to apples but definitely an interesting comparison though. The first version of the 066 I ever used said "Made in West Germany" on the bottom of it. That's old!

[@davidmax4815]

Stihl ambele

[@poparamiro]

Albastra clona dupa ms660, spor!

Așa te o smucit stihl-ul de am zis că te ia târâș 😂😂😂 china chiar face treabă bună

[@AbsolutionArmament]

I think if I ever need to buy a 90cc saw again id be buying an 661.

[@nathanwest2304]

or you could buy 3 holzfforma

[@nathanwest2304]

@arborcidal maniac correct as for the 60cc category you can get chinese ones for 50 bucks some times, shipped they work great

[@jbbolts]

@@nathanwest2304 they might even be the better option the way stihl quality is recently

[@nathanwest2304]

@@jbbolts I wouldn't know cuz I'm having a good time with my holzfforma saws :D bought the MS200T kit in february wich arrived just in time for the first lockdown after about 10 hours of unpacking, cleaning(that step is extremely important for these) and troubleshooting I got it up and running some of that time went in to getting the squish right, had to sand the cylinder quite a bit even with gasket delete naturally everything is tightened according to stihl specification I put a Factory Service Manual with all the torque specs and stuff on Arboristsite.com I'm quite happy with that little beast, loads of power in a small package, makes work fun^^ also I did put a big bore cylinder in my G660, much stronger now, propably also cuz the squish is just right even with a gasket.

[@jbbolts]

@@nathanwest2304 ive been on the lookout for a top handle saw for awhile now ...missed a couple of good deals used they get snatched up instantly used around here... might look into one of these knockoffs especially with stihls quality decline as of late these are more and more appealing

[@metoo7412]

Stihl is overpriced. A replacement OEM oil pump is $156.00 bahahahaha.

[@poparamiro]

Yes, way to much.... Thanks for watching!

[@weskerlion3260]

Parabens pelo video 661 sai na vantage por muito poco tem mais tecnologia que a 661 que a 660.,

[@poparamiro]

Thanks for watching!

[@user-vg4su4uk2r]

มีขายที่ไหนอยากได้สักเครื่อง