Porosity: Visual Welding Acceptance Criteria : AWS D1.1 welding defects: Part 1

video about welding inspection education
It covers topics below
welding defects covered in AWS D1.1
acceptance criteria for the welding defects
porosity
this video is helpful for the person who is preparing for the welding inspection certifications like CWI , CSWIP , ICC or BS . Good for engineers who want to learn about welding symbols in detail.
Type in comment below for any suggestion or information.

[@rustamali9748]

Thanks, informative video keep it up.

[@ajithkumarpandem2070]

This very very useful video, Thank you Sir, please put more video for the code acceptance related and explanation, examples are super but 1 request I need unit in mm related examples more.Thank you very much Sir

[@weldinginspection7239]

sure, i will do it, there are more videos on my channel based on acceptance , please check

[@panneerselvameswaran9754]

Thanks. Am preparing for aws welding inspection course. It's very useful

[@weldinginspection7239]

you are welcome Sir, let me know if I can help you with anything else. I have some practice questions as well for you

[@weldinginspection7239]

Also, this specific video is very useful for part B exam. they will ask you around 5 questions from them.

[@panneerselvameswaran9754]

@@weldinginspection7239 sir can you share practical questions. My mail panneer. [e-mail]

[@vvpk1217]

Very informative about AWS D 1.1 welding defects. please post acceptance croteria for other surface defects

[@weldinginspection7239]

sure Sir , I will

[@michelemagnani5390]

great videos by the way

[@weldinginspection7239]

thank you for the comment :) please subscribe and let me know if you want me to cover any specific topic.

[@shaazarwan2200]

Best Boss...👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍😬😬👍

[@weldinginspection7239]

thank you sir

[@panneerselvameswaran9754]

Bro. Good video. Please make more like this. Very informative

[@weldinginspection7239]

thank you, i will certainly. any specific choice ?

[@panneerselvameswaran9754]

@@weldinginspection7239 yes mainly on welding how to do visual inspection. Thanks

[@weldinginspection7239]

@@panneerselvameswaran9754 ok i will follow that. next video will be on undersize welds

[@rubenlarapalacios974]

Hi. your videos are so good because you mix the acceptance criteria with examples. I wish you could talk a little bit about B31.3. THANKS

[@weldinginspection7239]

certainly. i will cover that Sir. thank you for the feedback

[@WeldingNDTInspection]

Hii , You can find all the welding , NDT and painting related video ,see the below link . kzbin.info/door/YWGbHpYfpNFeEhKpZdygEw

[@WeldingNDTInspection]

Hii , You can find all the welding , NDT and painting related video ,see the below link . kzbin.info/door/YWGbHpYfpNFeEhKpZdygEw

[@WeldingNDTInspection]

Nice Explanation ..keep it up..

[@fasalabid7970]

I have doubt, what is maximum acceptable size of single porosity in fillet weld (on statically loaded non tubular connection)

[@michelemagnani5390]

I wonder if you can help me out unerstand when youn talk about cyclically loads you mentioned that 1 hole of porosity in 4 inches of lenght is allowed as long as it is less than 3/32 in diameter, but in your example you have 3 holes spaced enough apart to pass but the size of the middle one exceeds 3/32 being 1/8 but you still accept it??? shuldnt be a rejection because of the size ???

[@weldinginspection7239]

I realized, it shall be less than 3/32" so it is causing the rejection. thank you so much for pointing it out. I will edit the video and correct that mistake. I really appreciate your feedback Sir

[@Peter.Lecomte]

This confused me too. I wasn't sure if I was missing something.

[@antibogem]

thanks

[@zahirshah22]

Respected Sir, Are these conditions also applicable to prequalified welds in AWS D1.1? I meant if welds are made according to AWS D1.1 chapter 3 prequalified weld schemes, still we will use the 'same acceptance criteria' as you indicated in this video ?

[@ahmedraslan3184]

Sir what is maximum diameter for prosity in staic load in 1 inch

[@edgarcuevas69]

do you have any questions to study for cwi part B?

[@Anandkumar-ho4px]

For cjb , cyclicalical load no tubular is not at all applicable

[@TaponChakrabarti]

In your explanation : second check , Diameter shall not exceed (3/32)", but (1/16)>(3/32) as well as (1/8)>(3/32). Then how, it has been accepted.

[@weldinginspection7239]

Hello Tapon Sir, thank you for catching this, one more viewer showed the same concern. you are correct. I need to to update that. great catch :)

[@TaponChakrabarti]

@@weldinginspection7239, I saw that after commented.

[@yahyazone9522]

you are right

[@cesarmendoza790]

1/16>3-32? 1/16 is lesser that 3/32. The mistake is in 1/8 that is > 3/32 and shall be rejected

[@chantimahesh4662]

Sir can you make video on radiography testing for aws d1.1

[@weldinginspection7239]

sure, I have many requests line up and also have exams next month, i will surely make it

[@chantimahesh4662]

Welding Inspection okay sir actually yesterday I wrote asnt level 3 examination and failed,in exam given almost 20questions on this evaluation graph.if you can make asap it will be helpful for me.next month I have schedule☺️

[@weldinginspection7239]

@@chantimahesh4662 sure, I will do that based on D1.1 : giving level 3 is very impressive. you will do it

[@chantimahesh4662]

Welding Inspection I hope sir 😊😊

[@weldinginspection7239]

@@chantimahesh4662 you will , all the best . good value of level 3 in USA

[@sagarxetri4792]

@16:11 the 2nd porosity is not accepted becoz its greater than 3/32'' ...

[@weldinginspection7239]

Yes Sir, good catch, I realized that ,Thank you

[@sagarxetri4792]

@@weldinginspection7239 I really appreciate your hard work and dedication sir.... hope you rise soon..

[@weldinginspection7239]

@@sagarxetri4792 Thank you , that is all I need, any specific topic should I cover in my next video according to you please?

[@sagarxetri4792]

@@weldinginspection7239 Maybe the weld discontinuity like the samples for examination in aws cswip ..

[@weldinginspection7239]

@@sagarxetri4792 sure, thank you

[@galvanizedgnome]

Can you redo this in English?

[@weldinginspection7239]

sure i can

[@WeldingNDTInspection]

Nice Explanation ..keep it up..

[@weldinginspection7239]

Thank you Sir, your videos are very informative too :)