Porphis PHS135 MP 1.8 Economy Spray Gun, Priming Motorcycle Fairings Upol 2025

My ramblings on the Porphis PHS135 spray gun. Thanks for watching everyone. It really is appreciated 👍
Email contact for details of the manufacturer of these guns
Email: [e-mail]
Web site link,
porphis.com/
Retail sales store
www.porphis-online.com/collec...
Use discount code PETEHOBBY for a 5% discount on the Porphis retail store
Porphis PRD625, PRD715 & WP99G Unboxing and run-through
• Porphis Spray Guns, PR...
Porphis PRD717 Unboxing and physical comparison to the PRD715
• Porphis PRD715 & PRD71...
Review of the Porphis PRD625 1.3
• Porphis PRD625 1.3 Spr...
Review of the Porphis PRD715 1.3
• Porphis PRD715 1.3 MP ...
Porphis PHS155 & PHS135 Unboxing
• Porphis PHS155 PHS135 ...
Please subscribe to my KZbin channel, link below
/ @peteshobbies5383
The difference heating your clear coat can make,
• Warming Clear Coat Up ...
My Top 12 Mini Spray Guns Video,
• Top 12 Mini Spray Guns...
Comparing regulators and diaphragm regulators
• Spray Gun Air Regulato...
Comparing different clear coats;
• Clear Coats, Mipa CX4,... est Follow on Facebook,
/ petes-hobbies-10370917...
Follow on Instagram,
/ petes_hobbies
Music: Shanhai
Musician: FOREVERT
URL: icons8.com/music
All my videos are made for entertainment only. The views expressed are my own, and should you choose to follow them, you do so at your own risk.
Products, materials, machines and machinery used can be hazardous if used inappropriately, for your safety all will have instructions on there safe use either by contacting the manufacturer, viewing on manufacturers web sites, viewing there operating instructions or via technical data sheets, ensuring you are familiar with all this information will help with safe use of equipment and products.
Your local health and safety executive with help with information for the safe use and disposal of materials in accordance with your local environmental health regulations.
Thanks for watching

[@grantssmartrepairs]

pete please remember us professionals that use the guns daily will only clean through after use and maybe a full strip down monthly, some people dont do a full strip down for a few months etc so the amount of full strip downs you have down will be the equivalent to years of use mate 👍👍👍👍👍

[@peteshobbies5383]

Hi Grant, Yeah, I do realise that, that's why I try and estimate the number of times it's been apart, to try and give people an idea of what to expect under there circumstances. To be fair to the gun, it was the only thing I noticed that gave away the fact that it's not built to the same standards as the PRD guns, it works really well even for clear coat and base. Cheers mate, thanks for taking the time to point that out. People read these comments, so it gives them an idea of what to expect 👍

[@grantssmartrepairs]

@@peteshobbies5383 yeah in theory they should last years and im very keen to see there version of a mini gun!! Obviously i have top brand guns etc but i can see how impressed you are with the brand and if they do it right i feel there mini gun could be very good 👍 👍 👍

[@peteshobbies5383]

@grantssmartrepairs I'm really excited about the mini gun. It was scheduled for earlier this year, but it's obviously taking longer, which I'm thinking is reassuring as they want to get it right. Cheers Grant 👍

[@JohnWD40TC02]

Hi Pete, great video as always mate and the PHS135 looks to be a fairly good gun for the price, what I did like and you mentioned it in the video is that it lays down a nice wet coat of primer which is often what you need for primer work and was one of the things I wasn't so keen on when I had my FLG 1.8, you can see that the coating on the gun is not anodised but you get what you pay for so on the cheaper guns something has to give👌 Anyway thanks mate and I hope all is well over at Pete's Hobbies HQ😁😆👍

[@peteshobbies5383]

Hi John, For the money these are I think no one will be disappointed, certainly performance wise, they are excellent, cheers mate 👍

[@lesliwells5433]

ANOTHER GOOD VIDEO, pete,I normally pay,$30 to $50 U.S. DOLLARS for primer guns don't really care if they last,or not,that's better than paying $800 for a primer gun and you have to keep on buying over and over again at $800😂

[@peteshobbies5383]

Hi Lesli, I don't blame you mate, priming isn't fun and you still may need to prep the surface again before paint so it doesn't matter too much about the finish, certainly with primer/fillers, thanks buddy 👍

[@lesliwells5433]

@@peteshobbies5383 thank you for the video

[@peteshobbies5383]

@lesliwells5433 You're most welcome mate 👍

[@ScottMack-qs6qk]

Thanks for another informative video. These Porphus guns are really good quality. Interesting to see how their more economy lines produce a nice finish.( in the hands of a talented painter) Seems to wet out nicely. Enjoy the weekend

[@peteshobbies5383]

Hi Scott, Yeah, I was very happy with it. You can tell it's not made to the same standards as the other Porphis guns I have, but it's much cheaper, so you can't expect it. It's certainly excellent value for money imo, cheers mate, have a good weekend, I appreciate it 👍

[@davidharrison8397]

These guns are definitely gaining popularity.....i might end up buying one myself. Nice job !

[@peteshobbies5383]

Hi David, This is the cheaper end of their range, so the build isn't as good as their quality guns, but it's still pretty good and it sprays very well no matter what I've put through it,cheers mate 👍

[@stevejohn5624]

Out of interest,i was wondering have you a video using 1k lacquer,its something im looking to try,if you can big thanks,keep up the videos,all very interesting.

[@peteshobbies5383]

Hi Steve, try this. Hopefully, it will help, kzbin.info/www/bejne/h2WbgpyhdtWHoNU

[@ali-sleimanchehade6129]

Finally a mini spray gun for primer 😍

[@peteshobbies5383]

Hi buddy, it's a full-sized gun but still capable of doing smaller parts 😉

[@ali-sleimanchehade6129]

@@peteshobbies5383 ohh I see that’s even better 😍 don’t need to get multiple gun just this one for big and small parts 😍😍 thanks a lot man!!! Love your videos I have learned and discovered so much from you! 🙏🙏🙏🙏

[@peteshobbies5383]

@ali-sleimanchehade6129 You're welcome, buddy 👍

[@srodgie]

Hello Pete,good video. Do porphis do a higher end primer gun? Cheers, Steve 👍

[@peteshobbies5383]

Hi Steve, They do the PHS155, which is a step up from the PHS135, they also make a PRD515 in 1.8, that's there Pro range, I have a 515 but is 1.3 for base and clear so can't say how well it performs in 1.8

[@Danno74Z]

Hello from Colorado. I have been watching numerous videos on this gun and have seen all yours and you do a very through review job. Today, I ordered the PRD-715 and used the 5% discount. THANKS! My only concern is the shipping from China to US. I asked them to double box the spray gun and not just put brown paper on the display box and ship it 7,000 miles. How were the spray guns shipped to you? Any damage? Thank you.

[@peteshobbies5383]

Hi buddy, I've had no problems with any of the guns I've had from them from shipping or anything else for that matter. They put the box in a cardboard box with a few extra layers of cardboard around the box, it seems to work well, I've had one where the fluid adjustment put a dent in the gun box but gun and controls were fine, all the rest had no problems. For the UK, they use Fed Ex and once shipped its 2 days to my doorstep. I forgot to mention the discount code in the video, but it's good to hear it came in handy. It was originally 10%, but they reduced it to 5%. Still, it's better than nothing. Cheers, mate 👍

[@Danno74Z]

Thank you so much! Have a nice weekend!!

[@peteshobbies5383]

You're welcome mate, have a good weekend as well. Cheers 👍

[@claytonparkhurst4328]

I'm in US and ordered one 2 weeks ago. Still have.not received it. Tracking number just says handed over to delivery partner I'm gonna give it a few more days

[@Danno74Z]

Probably stuck in Customs. Everything from China entering the US has to go through Customs. I have had this happen to me before buying from the other "A".

[@DatFunnyPerson]

What are you cleaning your parts with in the beginning? and how long do you wait and let that stuff dry?

[@peteshobbies5383]

Hi mate, it's a solvent panel wipe. As soon as it evaporated, you're ready to go. You can get fast or slow versions, I use fast most of the time because it is rarely that warm. Obviously, the warmer it is, the faster it evaporates

[@DatFunnyPerson]

@@peteshobbies5383 is that used for before the primer or after the primer? And what product exactly is that?

[@peteshobbies5383]

@DatFunnyPerson Both, after sanding the primer I use it to clean the surface, this is what I use, www.ebay.co.uk/itm/112646831711?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=-0Ic_da4T4e&sssrc=4429486&ssuid=v5EZyL9iR9-&var=&widget_ver=artemis&media=COPY

[@toycoma98]

You reviewed the 1.8 phs 135 but they only sell the 1.3 on the website.

[@peteshobbies5383]

Hi buddy, they make it in 1.3, 1.6, and 1.8, I have a 1.8 and 1.3. If you message them, they can supply whatever size of the three you want

[@toycoma98]

@@peteshobbies5383 Just got mine today. The blue plastic thing can be removed, I'll put a M4x4 stainless grub screw in mine to make it look better. 3m pps 2.0 26003 S2C adapter fits this gun.

[@peteshobbies5383]

@toycoma98 Hi Mate, Yes, it's just a screw thread , I was saying in the unboxing video it must be part of the manufacturer process as it has no other use

[@toycoma98]

@@peteshobbies5383 I was wrong, M4x3 would fit better, the m4x4 grub screw i got was a cup point and it is not flush. Have to grind it. M4x3 flat bottom would work better, ebay seller The rusty bolt shop sells 2 pieces for 2 bucks.