Porphis PRD717 1.4 v Iwata Wider4L 1.4, Low Pressure, Low Overspray Spray Guns

My ramblings on the Porphis PRD717 1.4 and the Iwata Wider4L spray gun. Thanks for watching everyone. It really is appreciated 👍
Email contact for details of the manufacturer of these guns
Email: [e-mail]
Web site link,
porphis.com/
Retail sales store
www.porphis-online.com/collec...
Use discount code PETEHOBBY for a 5% discount on the Porphis retail store
Porphis PRD625, PRD715 & WP99G Unboxing and run-through
• Porphis Spray Guns, PR...
Porphis PRD717 Unboxing and physical comparison to the PRD715
• Porphis PRD715 & PRD71...
Review of the Porphis PRD625 1.3
• Porphis PRD625 1.3 Spr...
Review of the Porphis PRD715 1.3
• Porphis PRD715 1.3 MP ...
Porphis PHS155 & PHS135 Unboxing
• Porphis PHS155 PHS135 ...
Please subscribe to my KZbin channel, link below
/ @peteshobbies5383
The difference heating your clear coat can make,
• Warming Clear Coat Up ...
My Top 12 Mini Spray Guns Video,
• Top 12 Mini Spray Guns...
Comparing regulators and diaphragm regulators
• Spray Gun Air Regulato...
Comparing different clear coats;
• Clear Coats, Mipa CX4,... est Follow on Facebook,
/ petes-hobbies-10370917...
Follow on Instagram,
/ petes_hobbies
Music: Shanhai
Musician: FOREVERT
URL: icons8.com/music
All my videos are made for entertainment only. The views expressed are my own, and should you choose to follow them, you do so at your own risk.
Products, materials, machines and machinery used can be hazardous if used inappropriately, for your safety all will have instructions on there safe use either by contacting the manufacturer, viewing on manufacturers web sites, viewing there operating instructions or via technical data sheets, ensuring you are familiar with all this information will help with safe use of equipment and products.
Your local health and safety executive with help with information for the safe use and disposal of materials in accordance with your local environmental health regulations.
Thanks for watching

[@lesliwells5433]

HEY MATE,THANKS FOR THE NEW VIDEO AND THE INFORMATION ON THE GUN CLEANERS❤❤

[@peteshobbies5383]

Hi Lesli, You're welcome, mate . Thanks for watching 👍

[@TheVegasbud]

Looks like the Porphis is real deal. It's a great option for the Diy guys out here then you can buy a few and not kill your budget. I don't see a issue with the longevity as long as Porphis continues to back the guns with repair parts that are available to consumers .

[@peteshobbies5383]

Hi Mate, to be fair, the Porphis PRD guns are made as good as the big boys, and lots of people are using them now, I think the big companies will be a little worried 🤔, cheers buddy 👍

[@bryankelley6687]

Pretty work Sir, low over spray, and a nice finish, can’t go wrong. Thank you young man, cheers

[@peteshobbies5383]

Hi Bryan, Thank you, sir , always much appreciated 🙏

[@user-un5my5bw4j]

I am still using that PRD-715 1.3MM for clear coat instead of my Devilbiss DV1-C Clear Coat gun. Sure the porphis I spray at 29psi compared to the Devilbiss DV1-C's 10psi but the porphis puts a lot more volume out while atomizing extremely fine. I use that PHS-155 1.8MM for primer/sealer too. I hope these guns make these other companies rethink their prices. All 3 of my DV1's were expensive and before those I used Walcom and those Genesi360 guns were almost $900. There is no reason for a spray gun to cost that much. Walcom has to be pocketing $650 off every genesi360 or alumino360 they sell

[@peteshobbies5383]

Hi mate, I must admit, I am thinking something very similar mate, the big boys have been hiking their prices up when a new model come out to a point where its just not justifiable. Slowly, as news of alternatives emerge it will start to take big sales form them , it's only a matter of time

[@user-un5my5bw4j]

​@@peteshobbies5383 i wanted to ask you. Are your Porphis guns extremely loud like a whistling noise? Mine are its the only thing i do not like

[@peteshobbies5383]

@user-un5my5bw4j Hi Mate, can't say I noticed that much to be fair, compared to a DV1 Clear or Sagola DVR Clear they are rather quite 😉

[@ScottMack-qs6qk]

Thanks for another great side by side video. I love my 717 although I only have the 1.3 tip set. Interesting to see the comparisons with the Iwata. Haven’t noticed the weight difference but you are right about the feel or balance. Looking forward to your review of the new mini gun. As always, I appreciate you sharing your knowledge

[@peteshobbies5383]

Hi Scott, they are a lovely gun, the 1.4 just speeds it up a little , I will be ordering a mini gun as soon as they are out, so quite excited to try it 😀, thanks Scott, much appreciated mate 👍

[@JohnWD40TC02]

Hi Pete, a cracking comparison between these two guns mate the 717 really lays the clear on nice as does the Wider4L but it looks like the 717 puts out a wetter pattern making it easier to get a full wet coat down, it's not always the size of the fan that counts but the quality plus a wetter pattern is better for clear👌 I know I keep saying I'm going to get a Porphis gun but yet again I'm having financial problems which I wont go into on here, still having problems with my brother as well I really don't know what's going on there, happy days!!🙄😁😆 Thanks Pete👍

[@peteshobbies5383]

Hi John, Yes, people often assume a bigger pattern is better, but there's much more to it than just size. Well, that's what I tell the wife 😉 . The Porphis is definitely worth getting mate when you get some spare money. Hopefully, it won't be too long. Cheers John 👍

[@JohnWD40TC02]

Ah yes mate as the old saying goes it's not the size that matters it's what you do with it that has the desired effect🤭😆 One day I will get the 717 mate no matter what it takes even if I have to walk the streets 🚨mind you that would probably cost me money😁😅thanks Pete👍

[@digginsouthflorida21]

Thanks for all the great videos, which of the porphis guns would you recommend that would get clear on fast? (Most like the sagola) or would you just recommend sagola? I have a big job on a police truck in 95° weather in Florida. (humid) and have to get the material on quickly. Thanks again.

[@peteshobbies5383]

Hi Mate, PRD715 1.3, PRD625 1.3, if you want to keep the price down the PHS155 is fast as well, not as well made as the PRD guns but still good for the money 👍

[@benjaminchu6699]

Beautiful finishes, mate!

[@peteshobbies5383]

Hi mate, thank you, much appreciated 👍

[@TurboHDT]

I recently was looking for a base coat gun a managed to pick up 2 Saigaole 6800b guns for $30USD ea 1 came with both pps and normal 600mm pot 1.3 caps they are really good guns I run some candy apple base and a 2k clear they spray beautiful very impressed with them you can't beat the price, they Good addition to my R500 and my NVE I'm looking at buying a CV1 to see if its any good but you should do a review on the 6800's their pretty fast not too hard on the compressor not thats any buggy as I have 17cf unit something I noticed about Ali express after you buy something you get emails with guns but when I click on them the price would be $20-$25 higher but I though OK funny but when I clear my browser history and cookies the price became lower bit sneeky of them to try rip you off....go figure

[@peteshobbies5383]

Hi Mate, It's showing up at 60 USD in the UK, I'm using the app, so I'll look into how much I can get one for playing with the cookies. A few people have said they are good for the money, so it would be worth trying one, I think 🤔, cheers mate 👍

[@TurboHDT]

@@peteshobbies5383 I found if you don't log in and go to your check out the price is a fair bit cheaper

[@jamessakimae9655]

Hey Pete figured I'd let you in on this, just recently i was browsing Amazon and i happened to come across an lvlp with a split nozzle made by KOTA

[@peteshobbies5383]

Hi James, I've just looked it up, there's a fair few different ones about , the Dram I recently got is very good and not that expensive, Avalon in Taiwan also have some new ones out

[@brooks.5849]

Great video Pete!! I was in love with the Wider4L for a while until i discovered it it used alot of air. I have a 100Ltr compressor so its a no go. What full size/Midi gun do you recommend Pete for a Diy'er with a low air consumption around 300$ mark?

[@peteshobbies5383]

Hi Mate, take a look at the Meiji Finer Force guns. They are a good Midi gun, so pretty universal. Probably, the best made guns there is, bar none

[@brooks.5849]

@@peteshobbies5383 Wow beautiful guns!! Thanks Pete!

[@peteshobbies5383]

@brooks.5849 You're welcome buddy 👍

[@costask823]

Hi Pete! I ordered the MPH338 as well. Got it in the 0.8 tip. The email from them said it also can come with a 0.5 and a 1.0 tip. Now I only see the 0.8 and 1.0 tip in their website available to order. But I am not seeing the tips sold separately. Do you know if they will make them available separately? I would like to get the 1.0 and maybe the 0.5 as well at some point if I like the gun for the smaller repairs.

[@peteshobbies5383]

Hi Mate, If you message them, you should be able to get a tip set separately. Use the email I've put in the description. The email I received also says 0.5 as well, this is all very new, so I expect they will offer it once they have caught up with production

[@peteshobbies5383]

Hi Again buddy, I asked them about the 0.5 setup, and it's not going to be generally available, it is with bulk orders, so they will make them if there is a big order for them

[@costask823]

@@peteshobbies5383 Thank you!!!

[@peteshobbies5383]

@costask823 You're welcome buddy 👍

[@novavolks9652]

The blue gun with how many PSI does it work?

[@peteshobbies5383]

Hi Mate, on this video, it was 1.4 bar, which is 20 psi. It will work well at a bit lower pressure, but for best results with either of these 20 psi works well

[@jesuszaragoza2473]

Petes y en cuanto a consumo de material?

[@peteshobbies5383]

Hi mate, these split tip guns run at relatively low pressure and atomise fine, so they are very good on material consumption

[@jesuszaragoza2473]

@@peteshobbies5383 ok amigo pero en cuál pudiste notar un poco más o un poco menos de consumo?

[@peteshobbies5383]

It's very close, but if I had to pick one, I would say the Iwata uses a little less material

[@jesuszaragoza2473]

@@peteshobbies5383 muchas gracias amigo Petes saludos

[@peteshobbies5383]

@jesuszaragoza2473 You're welcome buddy 👍