Porsche Boxster Valvebody Overhaul, ZF5HP19

In This video, we will overhaul the valvebody out of the Porsche Boxster. These ZF5HP19 units have a lot of orifices so be very careful. Happy New Year to everyone. Thanks for watching

[@downtriptripdown]

gary they came out with 2 versionsof that VB, early version usesa 3 land prv on version one and version 2 usues a 5 land prv cross veriant to all 5hp19

[@n6mz]

Dear Maestro Gary happy new year and THANKS for reminding me to take really good care of my old manual-transmission vehicles!

[@igotaction]

Yes Gary, so nice to see you having an easy day working on German Zf transmissions

[@GaryFerraro]

Thanks for watching Joel, Happy New Year

[@igotaction]

@@GaryFerraro Happy New Year to you Gary, I have a BMW M57 diesel head job then a 6HP19 overhaul I need to call you mid next week about possibility of valve body bench overhaul for that 6HP.

[@charalambosmisiaoulis4969]

Mr Gary happy new year

[@GaryFerraro]

Thank you, you too

[@Carmafixcars]

Hopefully you replaced that impact drill by now

[@reinaldinhocambiosresende6551]

Feliz ano novo 🥳🎂🥳 pra vc e sua família e equipe

[@NarutoUzumaki-lx7tj]

Could you talk about the ZF9HP48 automatic transmission?

[@jberzin3]

I made mistake to keep small parts next to work area and got a spring jump them. Not fun to search the little things. Hope helps someone to avoid it.

[@michaelpoarch6469]

Who can I order the parts from to rebuild my valve body in my 1999 Porsche 911.

[@kadiriosmam]

Hi Gary where can I get taught how to repair automation transmission.

[@GaryFerraro]

Not sure of any schools, i guess on line and maybe working at a shop as a helper or teardown man

[@vicky-nc3to]

Sir in a similar porsche vehicle I have question, please answer if available. In a tiptronic 911, 1999 model, transmission oil was mixed with coolant & gears were not shifting because of it. Oil drained & it was all coffee, but no metal chips, oil flushed with original oil multiple times( oil filter replaced, valve body removed & cleaned) & now oil is good. When the car is on the lift all gears are going . PNRD all OK, something I have observed that when accelerating on lift at drive, car does not accelerate after 50kmph . When I put the car on ground, all gears shifts but car moves very slowly in Drive, even if I accelerate it does not works well. What I must do please suggest

[@GaryFerraro]

I suggest an overhaul, once the water gets in there, the trans needs to be done

[@janellatiamson6177]

Hi sir garry. Do you have a link or can send me photo of the clear picture of the colored plastics and also the springs, valves, filter, ball on the valve body? Thankyou sir.

[@GaryFerraro]

I do not have any pictures, Is it a Boxster trans your working on? Not sure what info is out there

[@janellatiamson6177]

Yes sir gary i work on porsche 986 boxster but watching your video i think i already got it thanks to you sir 🤝🏽

[@miceinoz1181]

Hi Gary, so how did you clean out the solenoids etc? Were new ones fitted, or did you clean the originals and refit (demagnetize etc)? Of course, your process would be relelvent to other ZF model solenoids.

[@GaryFerraro]

I didn't do much with them, they never go bad, left them installed and cleaned out the valvebody

[@DocMackGarage]

Hi Gary, I am wondering if you could assist. I have a 2007 BMW 530i LCi with the electronic gear shifter . When I start the car when it is still in park, there is a thud coming from the Transmission, and a clank when turning off engine which sounds like it is coming from the diff. If I leave the car for about 1 hour after it reaches operating temperature, the thud is more pronounced. Any ideas please. My initials thoughts were Solinoids and sleeves.

[@GaryFerraro]

ok, question, if you start the car in Neutral do you hear a noise? have a car here for a while and not sure what the problem is, it is similar to your problem

[@DocMackGarage]

@@GaryFerraro Funny you should ask that, about two days ago I tried that very thing about putting it in Neutral. It does not do it while in Neutral. Let me know if you find out what it is . I did a driver adaption rest too.

[@GaryFerraro]

@@DocMackGarage So far i tried reprogram(they told me they reprogrammed but no way i can tell) and i tried new set of park solenoids. The problem is the driveshaft is turning or flexing and the park pawl is hitting the park gear.

[@DocMackGarage]

@Gary Ferraro Exactly what I have , it sounds like the drive shaft turns and slams on park . The one more thing I noticed is if you leave the car for a while after running it, the thud moves the car backwards about an inch . When letting off the brake at a traffic light the car can roll back about 2 inches and thud (This is while in Drive. Do you know if this will damage the car ?

[@GaryFerraro]

@@DocMackGarage Well it certainly should not be there, not sure why it does this

[@michaelpoarch6469]

Hi where can I order these parts I called Porsche dealer and they where no help they just wanted to sell me a new valve body.

[@GaryFerraro]

What parts are you looking for?

[@michaelpoarch6469]

@@GaryFerraro I want to do the same job that was done in this video. I want to recondition my valve body in my tiptronic transmission in my 1999 Porsche 911. So the gasket and all the rubber or plastic parts.

[@wenzenuf221]

Hi. Great video. My A4 zf5hp19fl goes onto soft limp mode with no codes. It shifts perfectly but when I floor it she goes into this semi limp mode which prevents me from downshifting with the pedal. Also slams into reverse when this happens. And then all of a sudden it's fine again until I floor it. Last dtc was p0734. I've removed and cleaned the valve body. Tested the solenoid and harness. All good. Changed FLUID and filter.any advice? Thanks.

[@GaryFerraro]

does this happen when the car is hot?

[@wenzenuf221]

@@GaryFerraro yes

[@wenzenuf221]

@@GaryFerraro it does.

[@wenzenuf221]

@@GaryFerraro why would the problem come and go. I think even when cold. Sometimes she slams into reverse but if I cycle through the gears, the slam stops. I noticed after removing the vb, the clutch packs in dg drum were very loose in Park. Lots of free play. The clutches were not locked. Is that normal in Park?

[@wenzenuf221]

@@GaryFerraro also when doing an air check, the dg drum clutches didn't grab.

[@amadej7738]

Hi i have a question for my zf 5hp19 when i go from R into D or N it has a nock sound to it.. what part is wrong?

[@GaryFerraro]

i would star by checking the driveshaft and mounts

[@amadej7738]

@@GaryFerraro Thanks for your help will check

[@lass8477]

Can you tell me where the transmissions temeprature sensor, is located?

[@GaryFerraro]

Within the internal harness

[@lass8477]

@@GaryFerraro okay, thank you, so I have to replace the wirirng harness, for the valve body, to replace the tempersture sensor? I have one failing on my car.

[@GaryFerraro]

Not a common Problem, is ther a code for that?@@lass8477

[@lass8477]

@@GaryFerraro give me your email address, and I will send you some info.

[@GaryFerraro]

Gsferraro@yahoo. Com

[@NarutoUzumaki-lx7tj]

Could you talk about the ZF9HP48 automatic transmission?

[@GaryFerraro]

Not really coming in yet, still learning about that transmission

[@NarutoUzumaki-lx7tj]

@@GaryFerraro Why?

[@NarutoUzumaki-lx7tj]

@@GaryFerraro My car is equipped with the ZF9HP48 automatic transmission so I was wondering if you have the repair manual for it?

[@NarutoUzumaki-lx7tj]

@@GaryFerraro My car is a Fiat Toro Volcano 2021.

[@mikasoinetsalo9685]

@@GaryFerraro What's your best source for getting documentation about ZF transmissions? Is the ZF Aftermarket section the best one or are there better sources available?