Portable Sawmill Fails. Woodland Mills Portable Sawmill Fails. Avoid My Mistakes.

[@OregonOldTimer]

I'm watching a lot of sawmill vids, an HM122 being on my wish list. Yours are among the best, both for information and lack of BS. Thank you.

[@pewheretic7967]

Gold info! Common sense from a down-to-earth guy. Plainly spoken wisdom. Thanks for taking the time to share with us. My mill is on the ticket for this year. Glad I have resources like you to help me along.

[@crussell]

I don't often take the time to comment on videos, but as someone looking to buy their first sawmill, this has been the absolute most informative video I've come across, thanks for sharing everything you have learned the hard way Sandy. I'm leaning towards getting a Woodland Mills as well. Cheers.

[@sawingwithsandy]

Thanks I appreciate the positive feedback. Glad I was able to help you. Hope the sawmilling goes well for you when that time comes

[@Kamabushi999]

The world should have more people like you , really. Thank you You have changed countless life situations for the better.

[@sawingwithsandy]

Thanks Jake appreciate that

[@cmakowecky]

Just heard the lumber costs when you made this video. I laughed out loud at how cheap that was considering lumber prices nowadays. I just invested in an HM126 and so excited to get cutting. Love your videos, keep up the good work.

[@dannyparsons89]

I have a hm 126 14hp ordered, my friend has the same mill also, so I am familiar with them. Just out of excitement & anxiousness I have been watching youtube videos on them for tips and tricks and what not, and I have to say, your videos are the best I have seen and I will watch them all! you are very helpful pal! Cheers!

[@awar2847]

Thanks for the video, all very simple things that can be done to avoid problems. but you know many of us will make some of this mistakes.

[@kcender3771]

I know I come late to this video, but mistakes are better teachers than success. Thanks for your humble pie approach. I'm, sure you have helped countless people with this. Good on you. BTW, nice setting.

[@sawingwithsandy]

Thanks for tuning in and watching. I appreciate the feedback.

[@spuriouseffect]

This is the great thing about youtube. Learning from other's mistakes is such a valuable resource. Thank you for this. There are two types of millers.... those who've hit their log supports, and those who will. :-)

[@WhiteFox011]

BUT, BUT, But! LOL Nice to see a bit of humor in the comments.

[@KeeperofTheMountain]

Every video I have watched involving a Woodland Mill has one thing in common. The people that own it, love it. Here in the states they cost about the same as the cheap Harbor Freight mill and they are so much better built. When I sell my house and move to my land, This and a tractor are my first purchases.

[@sawingwithsandy]

Thanks for watching. I do like my unit. Great durability and doesn’t require much in the way of maintenance.

[@ranchking7628]

Sandy these tips are so true as I have a HM126 mill and have made the same mistakes you did and wished I had seen this when I just started milling. I have a high idle and the pinging sound you spoke of so this spring when I fire up mine I will be slowing the idle down to help the clutch. thank you saved my clutch! great videos keep up the good work!

[@sawingwithsandy]

Glad I could help!

[@gb4079]

Love this Guys honesty. Most of the problems "are of my own doing." top man. No different from the rest of us we all push our luck with our gear at times and its lesson learned when it all goes wrong.

[@sawingwithsandy]

Thanks for G B. Hope all is well with you

[@gradeseven9188]

Thank you for the fantastic youtube clip. I have just had my HM130 delivered and plan to assemble it tomorrow. I have waited 20 years for the opportunity to buy my mill. Your experience will help me greatly, again many thanks. cheers Thor Pedersen from Tasmania, Australia.

[@sawingwithsandy]

Hi Thor. I'm glad I could help. If you have any other questions feel free. Take care.

[@WoodsmanSkills]

Here's a hint when putting together, Get a pot of coffee going and be prepared to put more bolts then you can imagine if you bought the trailer package I should say. But I love my HM130 and my hm126

[@tomgrams2333]

My grandpa used to always say " you can learn from your own mistakes, or someone else's - and it's alot cheaper to learn from someone else's!" Nothing like real life education; stuff you never learn from a book! THANKS!!

[@sawingwithsandy]

I sure wish I could learn somethings from others. Especially the expensive lessons I learn myself haha

[@andrecostermans7109]

@@sawingwithsandy put some odour/fragrance/anything that smells into the lubrication-water, so you 'smell' it when running out of lubrication or clogging

[@robmcgrath5202]

Hey, thanks for the information. It's always great to learn of others' mistakes so you have an educated chance of avoiding them yourself. Much appreciated.

[@sawingwithsandy]

Anytime. Thanks for watching!

[@dansSawfish5604]

Got my mill 1997 LT-15 and the sharpener at same time.All still works like new ..thanks for your videos..

[@sawingwithsandy]

Sounds like some good equipment you got there Dan. Happy sawing

[@jtfisrtbuild947]

I myself dont have a mill but someday somehow I'm going to get one . Now I just need to keep this video handy for when I do get one . And like many others said already takes a real person to amite on camera there mistakes. You rock

[@sawingwithsandy]

Thanks I appreciate that. I’m just a regular joe I figure. Same as everyone else so why not share the errors. Thanks for watching

[@csnocke5]

I love your sawmill enclosure so cool. I’m going to build a shelter like that. Thx

[@zeke1eod]

Thanks for sharing and being honest, most guys/people would never admit on camera they made a mistake! You sir have gained a follower for being honest, and willing to help. God bless

[@sawingwithsandy]

zeke1eod always willing to help for sure l. Thanks for watching and welcome aboard

[@pstoneking3418]

As always very informative video. These are all things that need to be done on a regular basis. Thank you.

[@WhiteFox011]

Great job, a lot of basic stuff, but it is all so important!

[@The85F0X]

Your channel has pretty much sold me on buying an HM126. Just trying to get a few trees down before I do it.

[@sawingwithsandy]

Right on. It's a great mill for sure

[@briantuor1231]

Been running a band mill, different brand, for 30 years and agree with your points. #1 sharp bands, #2 sharp bands, #3 sharp bands. Thank you . Your other points are well taken as well. Situational awareness.

[@sawingwithsandy]

You definitely know the fine details of band saw mills after 30 years I’m sure. Thanks for checking out the videos and appreciate the tips.

[@davidmartin5179]

Great information. Very clear and consise. Yes, and keep your blades sharp. Dull tools are much more dangerous than sharp tools. Keep up the good videos and work.

[@sawingwithsandy]

Thanks David

[@MrRackinroll]

The first and only mistake you made was not buying a woodmizer mill. No doubt I have also made my own mistake , but those you mentioned never occurred with my woodmizer after 4 yrs of operation. Maintenance yes , but that goes for any moving piece of equipment. Thanks and have a great day.

[@Arnickification]

Awesome video and great info. Thank you. I should be ordering my HM130 in a few weeks. Partly because I watched you other video comparing a bunch of other mills. The only other mill that is dollar for dollar to this is the frontier. But I’ve seen a lot of videos complaining about frontier’s customer service and faulty parts!

[@toolman5723]

Ordered my HM 126 today! Better late than never! Great video for a newbie!

[@highlandervalasik9274]

I am an old man and will not be buying a saw. I watch many different saws and people operating them. The things you are pointing out apply to almost all saws not just the brand you have. If people buying saws would watch this video it could save them much heart ache. I also want to say thank you for going to the trouble of making this video. Sometimes doing things that help others can make you feel really good. I hope this gives you that experience

[@sawingwithsandy]

Well I can appreciate where you’re coming from and know what you mean about the work involved in running a sawmill. I likely encounter a time one day when the work is no longer worth the reward. Thanks for tuning in. Hope all is well

[@JSmith-tb9mi]

Excellent video. Bought my 130 back in July and pretty much made all of the mistakes you've mentioned. Very helpful.

[@sawingwithsandy]

J. Smith yeah the learning curve can be a steep one. Glad you enjoyed the videos and thanks for watching

[@grahammccoll1681]

I've always wanted a sawmill but figured it was more of a luxury thing. But I build so much stuff and with a cabin project next, pricing out lumber like you said at almost $4 CAD for a single 2x4, it adds up real quick. I think the unit should pay itself off after almost 2 projects if that and then it's all fun and games after. I plan to get the same unit as you and am also Canadian. Thx for the great info!

[@johnmoyer5515]

Your not the only guy who has hit the log rest, since the wheels of the saw run on the rails i made sure that the rails were straight after bolting it together it they had a slight crown so i loosened my bolts & used a come along to straighten, string line from end to end then tightened up my bolts again. So all the bunks should be in line height wise since thats what they bolt up to. I dont even try to use the log scale i just measure it. Wish i had this mill when i was young just turning 65 now.

[@sawingwithsandy]

Thanks for checking out the video John. Good tips about the bolts and getting the mill setup correctly. I also always say you’re only as old as you feel. Some days I feel young, some days I’m ready to pack it in haha

[@wade11115]

Awesome info. Your videos and knowledge are great. I’m waiting for my mill to arrive. I feel Confident I will produce quality lumber. Thanks again.

[@regrand3833]

Thanks for your great information! I am planning to purchase the HM 130 this week. Lots of logs here in Annapolis Valley, Nova Scotia after hurricane Dorian! Your information about blade care is invaluable. Thanks again! Reg Rand

[@sawingwithsandy]

Glad it was helpful. You’ll really enjoy having a sawmill

[@richardhenty3458]

Thanks for all your help this is going to save me a lot of headaches

[@sawingwithsandy]

Anytime Richard. Thanks for watching

[@ruby5631]

Thanks for honest comments, I too am in Canada and wood prices are just getting stupid. I bought the HM130 Max Anniversary edition in February and have made a few mistakes myself too. It is a great sawmill for the price and I would highly recommend it. I recently purchased the auto blade sharpener and that has increased my productivity a great deal. Thanks again for the honest comments...

[@sawingwithsandy]

Anytime, thanks for watching

[@garyenwards1608]

I'm looking at purchasing a model what are the options for sharpening the blades I know they sell a blade sharpeners it's $900 is it possible to hand sharpen these blades or is that the only option? How long does a brand new blade last before it needs sharpening?

[@ruby5631]

@@garyenwards1608 Hi, you can sharpen the blades by hand but it would take some time. I bought a pack of 10 blades with my mill and plan to buy another pack soon. According to woodland mills these blades can be sharped about 5 times but I will check mine once I get to that point. I have owned my mill for 2 years in February and I am still on my first 10 blades. I typically change my blade after cutting about 3 to 4, 12 to 16 foot logs, averaging around 20 inches in diameter. So it is not unusual for me to change a blade 3 times in a day. The mill works best with sharp blades and I can sharpen 3 blades an hour with the sharpener. The sharpener was definitely worth the investment. For the price the woodland Mills HM130 max is great but it is the largest that woodland mills sells. If you are looking for something a bit heavier duty check out Norwood as they have a bit larger unit with a more powerful engine but it is also more money…..

[@garyenwards1608]

@@ruby5631 Thank you for the feedback that's very useful I guess I should plan on buying that sharpener. I have been looking at the Norwoods for a couple of years and the price for their entry-level model just went from $3,000 last year to $5200 this year which is a huge jump in price where as Woodland Mills entry-level model has only gone up by $200 I've been thinking about purchasing the HM 126 10th anniversary unit for $4300 it has the 14 horsepower engine on it

[@binouchedeja8787]

Great series of vids! Waiting for my HM130 to be delivered. Nice to at least get a sense of what it'll be like. Hope you keep making these! Salut

[@practicallyIndependent]

I have an HM130 and I love mine. Got mine almost 3 years ago. Great video and appreciate you sharing. One added tip on the lube tank. Dont leave water in it over winter. It will freeze, expand, and crack the tank and it will leak. Guess how I know, lol. Also, for sediment in the tank, you can take the hose off and blow into the other end and force air into the tank loosening the debris. Mine got so bad I had to blow it out. Thanks for the tips, especially the one on the clutch wearing and throttle adjustment. Take care my friend!

[@sawingwithsandy]

Thanks for the tip about the sediment. I definitely have that issue. At the end of the year I just leave the valves for the water tank open. I dont mill anything in the winter as it's so cold here that everything becomes brittle and it's not fun to be standing out in the cold. Enjoy the mill

[@chriscox6598]

Some excellent tips. I need to borrow your idea and mark the uprights on my Woodland hm 130. I’ve hit the uprights twice myself. I replaced the magnetic scales with a aluminum ruler that I attached with bolts so I don’t have problems with the scale moving. Also I installed a cheap laser guide from Harbor freight to shine on the scale and removed the plastic marker. I agree that I wish I had gotten my mill sooner.

[@sawingwithsandy]

Thats a great idea about the laser and ruler. Yeah it hurts when you hit the log stops. Anytime I see that spark I feel sick to my stomach. Maybe that's because I'm pretty cheap haha.

[@hanktothehendrix]

Hey Sandy, really appreciate the time you take to share your experiences and learnings. I recently bought a 130 and a large reason for that was the review videos I'd seen of yours. I'm currently about to sit the sawhead on the track and I'm really glad I watched this video so I can learn from your mistakes before I start milling...although I'm sure there are going to be lots of other mistakes for me to make. Thanks again, from BC 👋

[@sawingwithsandy]

Hey Mountain Man, thanks for dropping in again to see another video. I’m glad they’re helping another sawyer out. Let me know if you have any questions but I’m sure you’ll love ot

[@garyenwards1608]

I'm looking at purchasing a model what are the options for sharpening the blades I know they sell a blade sharpeners it's $900 is it possible to hand sharpen these blades or is that the only option? How long does a brand new blade last before it needs sharpening?

[@hunterresearchandtechnolog3008]

Great video -- it's refreshing to hear honest advice and lessons learned. Thank you!

[@briantyhy4880]

great recommendations. thanks for posting

[@whereshunter6354]

Nice stuff. Just putting my 130 together now, hope to saw a few logs before winter hits!

[@sawingwithsandy]

Hope it goes well for ya. It's a great pastime for sure

[@robandnell4305]

great video for a sawmiller new or old. I am thinking about buying a mill and need all the help i can get

[@sawingwithsandy]

Glad I could help Rob

[@lowtechdiy4361]

Very well planned and informative video. Thanks Sandy

[@sawingwithsandy]

Glad it was helpful!

[@johnmagnus1016]

Great Advice! I have an HM130 also and I have run into many of the issues you speak of. Some really good tips to make sawmilling easier and more fun! Thinking of building a sawmill shed but unlike the logs on your shed most of my logs are big firs so I have to mill them to dimension for use on the shed.

[@garyenwards1608]

I'm looking at purchasing a model what are the options for sharpening the blades I know they sell a blade sharpeners it's $900 is it possible to hand sharpen these blades or is that the only option? How long does a brand new blade last before it needs sharpening?

[@drivingthoughts1111]

Thank you for sharing your knowledge!

[@craig-michaelkierce1366]

Great job as always, by Sandy...

[@tommybrackett5519]

Thank you for the information, very helpful for any beginner.

[@M5tworude]

Glad I found your channel because I just bought the HM130 and WC68. I also just bought a 40 hp tractor but not the same brand. Really enjoying the content and presentation. My chipper and mill were delivered to Anchorage and are now waiting for the river to get higher for a 80 mile trip upriver to our cabin. You should have seen the tractor arrive! Most things we can put in the floatplane but obviously not these large items. I like the structure you use to feed logs onto the mill, I think I'll do that as well. I also like the water catchment, clever. I subscribed. Thanks.

[@sawingwithsandy]

Hey Stephen. Glad you found the channel. Sou do like you've bad quite the adventures yourself up in Alaska. I've seen videos of Anchorage and the way materials can moved about on rivers like the Tana? (On discovery channel). Seems like an awesome area. Hopefully your setup goes well and you'll be making the chips fly in no time. You'll also wo der how you did without the mill before you got one.

[@M5tworude]

Sawing with Sandy I have the mill set up Sandy! I only lack a 24mm socket to tension the blade. I would have winged it had I not seen your video. I'll be marking my risers as you did if I can find a sharpie. Someone is bringing me a socket tomorrow so I'll be making lumber soon!

[@sawingwithsandy]

@@M5tworude glad I could help. For sure the torque seems to be important. With the cost of new blades ive found out the hard way. Hope you enjoy milling. It's a rewarding task for sure.

[@jonathanwhite460]

thanks for the advice,planning get 'woodlands mill' to mill larch and douglas fir here in the uk.

[@sawingwithsandy]

Douglas fir sure would be nice to mill. You’ll love having a mill. Thanks for watch

[@robertcochran3415]

Thank you for the great advice. I will definitely pay attention to everything you've mentioned.

[@sawingwithsandy]

Thanks for watching Robert

[@mindenhillshomesteadyukefa8091]

Thank you for this. I just ordered one. Very helpful. This all makes sense

[@sawingwithsandy]

Good to hear that I could help ya out there. Take care!

[@kevintreadway5963]

Just a friendly comment. I bought a Woodlands for my first mill and pretty much had all the same problems you have mentioned. I finally upgraded to a larger mill and just want to say that I have zero problems now. Tracking with every blade change, blade breakage, belts, blades jumping off all gone. Woodlands is a good starter mill but if you plan to mill for many years just get yourself a good one to start with and save yourself in the long run.

[@sawingwithsandy]

Glad your milling is going well for you. Thanks for checking out the video Kevin. Take care!

[@mountainviewcattle]

I think no matter what cutting process you're using, keeping things clean and blades sharp is always a good starting point!

[@sawingwithsandy]

Very true

[@MetaView7]

Good tips. Thanks.

[@cliffdunning9296]

Excellent video sir. Great tips and advice. I have owned and used a HM126 for about 5 years now. While thinning my white pine plantation, I have produced a fair bit of lumber and have run into very few problems with the sawmill. However, It really has been a learning process. I tend towards neglect when it comes to maintenance, though not entirely, and it seems to keep working. Change the oil yearly, de-tension the blade every time I am finished with it, lube things once in a while; Although my clutch kinda sounds like your example of what not to hear, so I better take a look at it ;) I think your main tip on blade replacement is important whereas I tend to push them a little further than I should. I go really slowly when I notice it isn't cutting as efficiently. I have had only one break on me. Hardwoods really shorten blade life. I can cut pine for days with one blade but white oak will dull it in one or two logs. I think reading a log for what I can get out of it and positioning it properly is something I have learned to do well but this took time, trial and error. Did you have any issues getting and keeping the bed perfectly level? God bless and keep milling, Cliff

[@sawingwithsandy]

Cliff Dunning good to hear that you’ve had a number of years of good operation out of your mill. I’ve had trouble keeping the bed level due to the freezing and thawing of the ground I figure so I end up having to relieve leach spring. Maybe one day I’ll find some long pieces of steel to run under the bed or cut some large timbers for the mill to sit on. Happy cutting!

[@Lumber_Jack]

Wonderful video -- super helpful and I appreciate the honesty.

[@lr22same47]

Good stuff, thank you for sharing, great advice. Just ordered my HM130Max, can't wait to start cutting.

[@sawingwithsandy]

Have fun!

[@basilbear1]

Thank you for sharing and pointing out almost all the issues I have myself with blades. Now if I could just get it completely level and not have taper on one end

[@sawingwithsandy]

Yeah I hear you on that one. I struggle with that sometimes too. I’m leaning towards large beams under my mill or concrete pad

[@hanktothehendrix]

Does a planer sort that out? Obviously it would be great to not have to do that...but I've wondered that before I start on my journey of milling.

[@basilbear1]

Mine is on a cement pad at the job im doing right now. Have not had to adjust it at all. Going to pour a pad at home for it now it the best way to go

[@07decker]

great video, I am also in Canada, Dornoch, Ontario. My neighbor and I just bought the same mill and got it up and running. I have allot of white pine and will be learning very soon. thanks!

[@sawingwithsandy]

Hi Rick. Good to hear about your mill purchase. I’m sure you’ll have a great time making lumber. Nice area you’re from. Thanks for watching

[@TheMonkdad]

Thanks for the video. Helpful and succinct.

[@frankapplegate4852]

this is a very important video so i saved it on my computer

[@sawingwithsandy]

Glad you liked it Frank. Thanks for watching

[@jimhofoss9982]

great review on dos and don’ts...One thing these sawmill videos are lacking tho.....how long does a band last IF you have clean logs? Can you get a day of cutting? how many hours of cutting on average per blade?

[@sawingwithsandy]

Hi Jim. I can get a full day of cutting without issue if the logs are clean. II bet I could cut a good 10 hours of softwood without noticing any reduced sharpness in the blades

[@doi467]

wow man excellent video! i was thinking about buying one, was looking at the norwood but might consider this one. i'm glad you said witch mistakes are operator fault and which ones are design flaws.i think the way you ended the vid might have convinced me...tks

[@sawingwithsandy]

doi467 yeah it’s a good sawmill. I’ve not seen any real weak points on the mill other than the idle of the machine being too high from the factory. That was an easy fix that I’m sure they’ve corrected by now. Other than that I’d buy one again for sure

[@pixellake636]

Thank you so much for sharing this!

[@sawingwithsandy]

Thanks for watching

[@gavinwhite7781]

great advice, thank you

[@leighhardy9926]

Thanks for taking the time to share

[@sawingwithsandy]

Glad you enjoyed. Thanks for watching

[@garyenwards1608]

I'm looking at purchasing a model what are the options for sharpening the blades I know they sell a blade sharpeners it's $900 is it possible to hand sharpen these blades or is that the only option? How long does a brand new blade last before it needs sharpening?

[@floydgath1149]

Do you go through bearings I noticed they sell bearings on their site

[@TheHappyHermit]

Fantastic and honest video. Glad I found your channel

[@sawingwithsandy]

The Happy Hermit glad you enjoyed it and welcome to the channel

[@jaysea7743]

Good stuff my dude

[@starboardwingwoodworks5235]

Valuable video. I have the HM130 (purchased 8/19 -----six weeks before they came out with the electric start grrr) I still love my Woodland Mills130 . The electric start engine is not "swap-able" I asked. What's your procedure for leveling the mill? It's such an important item. Maybe you've done a "show and tell " already. That would make a valuable video. Just subscribed. SWWW

[@sawingwithsandy]

Thanks for checking out my channel and I appreciate the subscribe. Hope the sawing keeps going well for you. Here’s a levelling video I made a while back. There’s some other sawing videos within my sawmill setup playlist if you’re interested. kzbin.info/www/bejne/m4LFlGuwn7lrgMU

[@Twindadx2_]

Great job! Thanks for the tips and tricks

[@sawingwithsandy]

Anytime. Thanks for watching

[@powermetalfreak]

Great/helpfull video. I have had that idle ringing right from the start. I loosened the throttle a bit that got rid of it for a couple hours. Today on my thrid session of milling it came back and decided to ignore it a bit. Now i saw spark coming from the clutch while letting down the throttle. Wondering if there's a bigger problem going on. Probably only 5 hours of motor time.

[@sawingwithsandy]

powermetalfreak yeah sparks can’t be good. Your idle may be the issue causing the clutch to prematurely engage. Folks at woodland mills have amazing customer service so I’m sure they will take care of you if you give them a call

[@curtisfranklin6830]

you forgot to show exactly how you use the torque wrench for tension. do you remove the adjustment handle?? thanks

[@sawingwithsandy]

Hi Curtis, be sure to check out some of my other sawmill videos in that playlist to see the sawmill in action. Thanks for watching

[@johngibbs781]

Red pine sandy territory. Im on a sand maple ridge. I dug a hole 10 feet down, used a plastic culvert, cut slits and holes in it the bottom 4 feet of it and stood it up in the hole. Backfilled it with B type 2,( clear stone would have been better), the bottom 4 feet stone, top 6 feet native sand, and threw a pump in it. I have virtually unlimited water. Its the middle of august dry season now, and there is only 2 feet of water in the bottom but i can run a garden hose for hours and hours watering my garden chicken amd ducks and offgrid cabin storage before the pump starts chugging. It refills instantly. Water runs through the sand like its not even there.

[@sawingwithsandy]

I may have to give this a try

[@twen7yseven]

Invaluable info, thanks so much for sharing! If you happen to see this.. how long can I expect a blade to last? I don't even know what unit of measurement that would be, but if you could give me any idea at all that would be awesome!

[@sawingwithsandy]

I can make a blade last a few weeks usually before I notice it starting to dull. That’s cutting probably a few hours every few days

[@herbhouston5378]

Lot of good information!

[@sawingwithsandy]

Thanks Herb. Hope all is well with you

[@elginjohnson4145]

Good video, one thing I thought of while watching it was, your wheel has a small crown on it to keep the blade running straight, if it has a little bit of pitch or fine sawdust build up this will throw off the blade and it won’t track right, so by keeping the wheel clean the blade will stay in and also as what you said, keep it sharp and guides close. E.J.

[@sawingwithsandy]

That’s a good point E.J. Thanks for sharing

[@fishguts4247]

Great advice. Thanks for taking the time to do this.

[@sawingwithsandy]

Glad it helped. Thanks for watching.

[@shaunfrench7297]

Thank you best wishes

[@1987Confused]

I've been debating on buying one for years I think I want one on a trailer. It would have been nice to cut the lumber package for the tiny house I'm finally almost done with. Did alright with cull and salvage thought less than a grand cabinets, wood paneling, and siding included definitely doesn't include labor...

[@sawingwithsandy]

You'll know when the time is right to buy one I'm sure. I've gotten by for years without one. But now that I have one I wouldn't be able to go back.

[@vossierebel]

Great advice - thanks!

[@sawingwithsandy]

Thanks for tuning in!

[@CaptJohnsBar]

There is a "L" shaped rod thru your blade guide assembly that prevents blade contact with the metal uprights on your bed, how did you hit them twice?....Good videos, I subbed!

[@sawingwithsandy]

That L rod has rattled loose on me before and I forgot to put it back in. My fault for sure. Glad you found the channel. Welcome aboard !

[@edsmith4414]

In addition to mistakes all saw millers make and learn from, this video SHOULD be a case study in "you get what you pay for". Watching you go over the things to watch out for, I'm comparing them in my head to my Woodmizer LT40 manual mill with 18hp engine. Torque wrench the blade tension ? WM solved that with a hydraulic pressure gauge, you simply crank the tension to the setting on the gauge. Hit the log dogs ? That pc of square tubing is clunky to start with....WM uses a dog that stands up 11" tall, and is made to pivot 90 degrees as you saw the log down....all the way to below the bed rails. The other thing is on the WM, you work the controls from the SAME SIDE as the dogs so you can keep an eye on them, versus you working from the wrong side on your mill. Raise the head when you back up. WM LT series uses a small 12v motor to raise/lower the head. When you get to the end of the cut, it becomes near automatic memory to toggle the switch that raises the blade a little to back up....no hand cranking up/down. The magnetic scale on yours....WM has a fixed scale bolted to the upright based off the bed rails, and a sliding scale with the 'quarter' scale on it you can move if you want to use that scale...held with a simple locking thumb screw, not a magnetic backing. Then there is the overall amount of steel in a WM compared to a simple angle steel frame on most of these lightweight mills. Put a 20" or so log on one of these and watch it flex. Mine will saw a 20' log as well.....which is handy for rafter material if the building is any width at all. I've sawed over a million board feet on mine over 30 years, and it's good for many million more and another 30 years to the next owner (some day). There is just no comparing the overall quality of a Woodmizer mill once you run one a while compared to all these lower end mills. Not saying there isn't a place in the world for lower end mills, but you truly DO get what you pay for.

[@gsxrjct733]

Any idea about how much board feet you get out of a blade? I know wood species matter and dimensions also.

[@sawingwithsandy]

To be honest I'm not too sure but I can tell you it seems like I'm using the same blade for a long time when I"m cutting only pine with it.

[@Bessency75]

For your water barrel use a paint strainer for the intake and that should take care of any sediment

[@sawingwithsandy]

Great idea Matt. Thanks for that

[@giernert]

Valuable info. Thanks

[@jazzbassmc8043]

Very good video thank you very much!

[@sawingwithsandy]

JAZZBASSMC glad you like it. Thanks for watching

[@macbride33]

really enjoyed this Thanks!!

[@sawingwithsandy]

Thanks Mike

[@peopleiknow2896]

Thanks for the lessons learned, my dude.

[@sawingwithsandy]

Friendly Local glad they helped. Some days my lessons are worth 2 cents the next day half a cent haha

[@almonjacob3496]

Good video, may I also suggest that you torque your blade, start the mill and let it run 5 minutes with the blade running. Do this while your getting the rest of your sight ready for the day. Then before you cut, shut off the mill and re-torque the blade, I bet you'll find it loosened up!

[@sawingwithsandy]

Almon Jacob that’s a great point and I’ll be sure to try that out. Appreciate the tip

[@carrythetorch33]

just got my hm130max. love it so far

[@sawingwithsandy]

You'll enjoy it for sure. Happy sawing!

[@perrytulk5332]

I have a HM126 and it has a loud pinging sound when idling... Could You tell Me how to adjust the idle like You mentioned? Thanks!

[@sawingwithsandy]

Perry Tulk sure no problem. There should be a screw with a spring on it on the side of the carburetor. If you loose than screw slowly the idle will be reduced. If you tighten that screw a little the idle will go up. I hope that helps

[@vkeshelya]

Hi Perry I have HM126 as well and I’m new to eat only five hours work headed from August 1 thing I noticed when I started it for the first time is that pinging sound and I felt that it didn’t sound right so I’ve contacted Woodland Mills Send him a little video of engine running with that sound asking if that should sound like that the reply was yes it’s normal but now I’ve seen this video I will definitely try to adjust it although saying that after a few hours of working with my sawmill it seems like that sound gone

[@sawingwithsandy]

Enduro Kesha glad the sound went away. I thought that sound was normal at first and so I left it alone. Then when my clutch wore out I knew that the ping was the sound.

[@bryansnewandused]

Lol Ive heard your clutch rattling in other videos. How many guide guide bearings have you replaced? That should be another tip. Ive chewed up the back of the blade after a bearing failure. Me to getting lazy trying to finish a cut. Looked like a arc welder ran the length of it..lol Ive cut hickory for log stops after I cut one of mine. I joined the club there as well not a tooth left on the blade. I have built a 40x16 cabin for a camp with my 126. A 16x22 foot shed. I have a cnc router I make signs with live edge stuff. I custom built the cnc router. I got 4 roofs this year to cover my equipment the sawmill and other things almost finished. New beams in a old building here that was rotted out ready to collapse in heavy snow. Live edge tables I got to hide from people cause the wife wanted them for camp. I had to sacrifice one to the mail lady. I love my mill. We would of never been able to afford lumber at the big box stores to do all that. Like watching videos like yours. Im a tip top mechanic 35 years fixing other peoples stuff.. But knowledge from others helps to. The siding jig is my next purchase for me. How do you like it?

[@whiteoakroadfarms]

Do you find that a dull band really makes much of a difference when sawing? -Ha, Ha, just kidding before you answer with "Sigh...Who put the straw in the strawberry?"..... Being serious though another detail to stay on top of is your drive belt tension. They get loose and it does not take much for your band to begin slow down in the cut if your belt is slipping. It is often over looked and will cause performance issues for sure. Great job with the video!!

[@sawingwithsandy]

Jim Medeiros that’s a great tip about the belts. I rarely think about them but I can see that they could cause a serious headache. Thanks for watching!

[@audreygreen-hite2075]

When I leave the dust in it gets between my blade and roller and brings the tension to about 60 pound and it will Jump or brake the blade. Luca

[@timberdoodles4647]

Cut out the bottom of the guard cover, let the sawdust just fall out.

[@sawingwithsandy]

That’s a good idea you’re not the first person to mention that. May have to give it a try

[@sawingwithsandy]

Yeah that’s a great point

[@jimhofoss9982]

@@timberdoodles4647 then the sawdust falls on tracks and wheels...is that less of an issue?

[@timberdoodles4647]

@@jimhofoss9982 I don't see it as a problem on my mill, it has open guards on the bottom. I have a scraper that runs back and forth to clear the track at the wheels, its just a block of wood in a square tube is sets there free.

[@HippocratesGarden]

That magnetic ruler. Unless you're changing it often, why not just put a screw through it at the top, or something to keep it from moving. Perhaps even just glue a small piece of metal or something as a stop. As long as it's butted up against it.. you're golden. As to the engine RPM, for those who may not be able to tell by ear, there are some cheap, simple RPM gauges that can be added, just need to wrap a bit of the wire around a spark plug wire and it works great. Used on all kinds of small engines. Oh and for the water.. there are these things called "filters". Heck even a couple of coffee filters would help a lot.

[@sawingwithsandy]

Could be a good idea. The ruler however hasn’t budged in almost three years. May just be lucky with a strong magnet

[@hosocat1410]

A wing nut on that water valve would be a good idea, woodland mills design team.

[@johnos4892]

Great info, thanks

[@sawingwithsandy]

Thanks for watching John