Ported Husqvarna 545 vs The ThunderKitten!

[@Chuckrussell75]

Oh my God dude, lmao!!! That is awesome though. I was rootin for your ported 545. Them rings got theyselve's seated! When you come out with the new Stihl character, I mean, I laughed so hard rattled the dishes in the cupboards. Friggen HILARIOUS! Liked, shared on my FB feed, yeah. Excellent work, haha!

[@RainVale]

These just keep getting better. Great work!

[@JeffMOA]

This is some of the best stuff I have seen brother 😂👍 keep up the Great work!!

[@CutterCH]

D.B. Fresh? Lmao. Best Stihl fanboy impersonation and best video ever. I love it. You nailed it. 🤣🤣

[@Houseworksaws]

That lil 545 is strong 💪.. like you were saying the rings maybe seated and the A/T dialed in better that 400c needs about 10 tanks before it really shows what it’s got. Like I was saying about mine it was literally like a light switch it changed. It went from good to great in a blink. Never seen a saw do that and I’m not even a huge Stihl guy I just bought that because I’m an engine geek and liked the mag piston idea lol 😆.

[@edzeigler1164]

I just found you on u tube today. I have watched several of your videos and first off, I like you, I like your videos, I like what you think and say, and I like what you say about the other guys like yourself. We all learn by talking to other people and we all have different ideas. And like you say we can always find new ways to get more power and more torque. But it is hard to improve a saw when Huskvarna has done such a great job already

[@jerseyjoshua4818]

Boedy your commentary and innuendos are top notch funny and second to none on youtube. 🤌👍

[@nmancini]

This video helped me decide to pick up the 545, can’t wait to get it in some wood and once it’s broken in a bit open up that muffler

[@joshuajohnson4396]

Don't forget the thumbs up. Let's help our woods men

[@timfunk5084]

How come I am just getting this video. Good job on this one very funny.

[@SCouch-cw6je]

Love the dye job!! This is awesom

[@DaveNorvell]

I enjoyed watching was pretty funny thanks for the laugh.

[@lumbearjack1439]

Great video. Watched till the end!

[@timothybyrom5560]

You can only make so much power before you start affecting other things. Bearings, burnt clutches, broken cranks. Iron horse had to ease up on a 66 that was over powering the clutch. Most things on a saw are built to handle a certain amount of power. Once you get past that you start having parts failure.

[@Cholton222]

I really appreciate your effort. Your funny as all get out. I have a 545 I like it use it every day dayum near. 20 inch bar . Had it for 2yrs now. I do also use it alot in the tree for blocking down, pine, oak, etc.... I have found no hot start issue with it yet. Bsafe Brodey and keep up the good work.

[@majorpixchannel7146]

Awesome video brother

[@SixOFord]

I've been looking at 50's lately and I had it down to the 261 and the 550. I'd snag a clean 346 in a heartbeat. Now I'm leaning to the 545, though, because it'll probably run a 24" bar most of the time. Interesting results. I'll port whatever I get for sure.

[@gregvoigt551]

Love your channel.My new fave for sure.Did you do a muff mod on this 545?If so what did you do to it?

[@1stfloorguy59]

I used both the 550 is nicer to me. Need to keep that chain sharp as shit though. Like you said she bogs and loses a bit. Smaller bar and a different chain have always been in the back of my mind

[@novicelumberjack]

Yeah, the 550 was NOT designed to be a general purpose saw. Give it a 16" bar and keep it spinning! The 545 though, totally designed for professional use but general purpose. A catch all small saw. Both are great, but very different performers.

[@jethronb]

The 545 is $900 Canadian!!

[@novicelumberjack]

Yikes!

[@Chuckrussell75]

😮

[@Doc-Cole_Trickle-of-Chainsaws]

Love the little talks Big Guy 👍s🆙

[@redtiller1975]

That was a great video. I know you don't, but don't let negative people get to you. Keep working on your filing and have fun cutting. Thanks. Enjoy the day.

[@aaronpowell4885]

That 545 is definitely a little screamer! Love D.B. Fresh😂 so much better than I had imagined👍🏻 With the "clone" saws, it's always a gamble. Excited to see what you do with the 372 and future 660! It is ridiculous just how much drama gets brought in to our fun hobby.

[@swsexton1829]

Where did you get the 22” bars? What brand are they?

[@chrisjacobs2182]

Love your humor!

[@andrewfitzgerald1174]

The echo will smoke it. Just my guess!

[@kg66428]

I have a 550xp, and I agree that its built for rpm, and it excels at it with a 18in .325. I also have a clone ms260 that I put a 20in 3/8 which works great. I thought that the 550xp would do the same or better with 20in like the 260. But the 550 seems to bog easier with 20. The 260 will pull and cut, not fast, but it'll do it better then then 550(with a 20) But the 550 will out run and out cut the 260 but only with a 18(or smaller) .325. its just what its built for.

[@coreycorp7048]

when you talk about 545-550 are you talking about the early mark 1’s? because the newer 545-550 mark2’s dont have rev boost and in general are on another level than the older models.

[@dubbssawshop]

Absolutely loved this!!!! 🤣😁. Fun and damn shore entertaining 👍👍.

[@buddysumner4022]

U was spot on with the stihl fanboy, 🤣🤣🤣 that’s the why they think , but they don’t no no better they rode the short bus when they went to school, 🤣🤣🤣🤣

[@acdatz6222]

I'd like to see the Dolmar 5105 compete against some of these 50cc saws.

[@Zach_R]

Great video keep them coming!!!!!

[@timothybyrom5560]

Wish I could make both of those events.

[@cajun3197]

Hilarious man! 😂😂😂 good job on that husky

[@jesseharmon1466]

D.B Fresh 🤣🤣🤣 I love it 🤙🤙

[@kingsaws]

Where is the Paul bunion show

[@novicelumberjack]

Somewhere in Ohio.

[@kingsaws]

@@novicelumberjack shit ! I best be looking that up ! I'm somewhere in ohio

[@kingsaws]

Traly that's in marysville too!

[@peanutbuttersanwhich1488]

- By the way. You totally nailed it! I just laughed and had too watch again and again lol

[@imperfectcuts7028]

"I only paid $1000 dollars for it." Live that literally every sthil guy

[@dan-dan-da-treeman]

I so love this 😂!

[@peanutbuttersanwhich1488]

That’s funny. Good video, good character you added too the wack off series. It’s true man, stihl guys are exactly like that. I have couple guys near me thinks their Stihl’s 390 290 is fast and same power as my echo 680, 7310 makita 5000, 6100, 7900 lol Those dudes are all stihl everything. They use nothing about stihl products nothing else. Stihl guys around here in Northern Arizona thinks stihl is all the shit in-away haha. It’s funny

[@ramoutdoors6415]

This vid the best man!!!

[@timothybyrom5560]

Lot of people are Drama 24/7. They feed on it.

[@Houseworksaws]

Hahahahahaha this is F’n hilarious

[@ramoutdoors6415]

Buckin uses the 1/8" file for the baby C....

[@kingsaws]

I'm rooting for the husky

[@keithsmith4971]

I need a muffler mod on my 545

[@erikredbeard87]

I don’t know, The thunder kitten is a Brisco build. I know you said that it was built for torque so being that you cut oak most of the time and it being a brisco port job I think it has a real shot at taking the husqy.

[@Brian-Outdoors]

Man you are f-cking hilarious! As far as the 550 Mark II I think Aaron is on crack and you put way to much stock in his opinion. It is high revving and has plenty of torque. There is a video of it pulling a 32” bar stock and then muffler modded kzbin.info/www/bejne/faOTp3pmrNaMpcU. I am in a tree service and it is one of my favorite saws.

[@sawboatsndarmwrestling]

I have 2 redmax gz5000, same as jonsered 2252. I beat the hell out of them, they are beast. Autotune is messy some of the time but they always adjust themselves back. Very fast saw , perfect for limbing

[@crazyfeller5704]

👍

[@rebeccarobinson7024]

Everything well said

[@pallmall5495]

The Stihl could have been 20 ccs smaller and beat the Echo.

[@CutterCH]

🤣🤣🤣🤣 Not hardly.

[@Brian-Outdoors]

I didn’t know D.B Fresh’s real name was Pall😆

[@pallmall5495]

@@Brian-Outdoors He is my son thank you.

[@CutterCH]

@@Brian-Outdoors LMAO 🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣

[@Brian-Outdoors]

@@pallmall5495 lol

[@caelanshong3765]

About the baby c chain file, you probably aren't as advanced of a filer as Buckin' is.

[@novicelumberjack]

Definitely not NEARLY as good, probably never will be. But I can experiment and have fun. Hope you liked the video.

[@caelanshong3765]

@@novicelumberjack Video was awesome! I love your content.

[@playingwivwood]

Thunder kitten just sounds weak my votes on husky

[@leo-.-258]

Dont worry for other's people opinion, iven if they say something negative of your video.

[@thetwostrokerebuilder]

🤣🤣🤣🏁🏁

[@Apalm12]

A think the husky takes the win