80mm Throttle Body is from Overkill Motorsports Ported Intake Manifold is ported from Kenny Roberts Please subscribe for more videos!
Пікірлер: 119
@NEWNATURE7773 жыл бұрын
Great! You forgot to disconnect the battery's negative cable, it's a must when dealing with electronics in car also will reset the ECU when first start the car👍
@SilverDollarSaloon2 жыл бұрын
Overkill is out of business, they never reply to any messages.The 80mm 5th gen camero throttle body is no longer for sale.
@CJ-vz5bl5 жыл бұрын
A few suggestions: 1) upgrade to a cold air inductions intake. Not all intakes are the same. CAI is the best brand for the 5th gen 2) windshield washer reservoir relocation with an intake air scoop. They put the washer fluid right below where the intake pulls in air from. The relocation and air scoop made more power for less than 200$ 3) e85 Subbed btw, even tho I sold my 5th gen v6
@Sameres1235 жыл бұрын
Chris J Thanks for the subscription. Yeah I’ve been looking for an intake. This intake I bought actually gained 6 wheel on a dyno. However lost power since its not in a box like the cold air inductions intake so it gets heat soaked if that makes sense. Also did you have the windshield washer mod and/or e85 on your car?
@CJ-vz5bl5 жыл бұрын
@@Sameres123 I did not have it on my v6, ended up trading it in for a 6th gen ss. But theres alot of information about it on the camaro5 forums. Theres also some videos on here with camaro v6 that have e85, should net you 20-30whp if its available in your area. Here's some info on the cai/WW relocation: www.camaro5.com/forums/showthread.php?t=249225
@FORD150-5.44 жыл бұрын
Questions do you get check engine light whit the scoop because more air Flow I need to be tube?
@yzc-roscoe30595 жыл бұрын
I just recently had the port 80mm tb, ported epoxy filled mani combo from Kenny installed on my camaro plus the K&N AirCharger Intake. I’ve gotten my authorization code back but I’m at work so I have to wait to get back home to update EFILive with the code and then get the tune but in all I can definitely feel more power w/o Will’s tune and can’t wait to see what the car does with the tune
@Sameres1235 жыл бұрын
Same here. My datalog didn’t save for some reason that I was gonna send to will so I have to make a whole new one.
@Ahtazal2 жыл бұрын
If you add an 80mm do you have to change anything else? Or can you just add a throttle w/o having to alter anything else?
@JM811Cars2 жыл бұрын
@@Ahtazal you’ll need a tune, as it’ll likely throw a check engine light for running lean due to the added air flow, at least that’s what is happening to mine while I am waiting for the retune
@Ahtazal2 жыл бұрын
@@JM811Cars thanks
@AngelEspinosaV Жыл бұрын
Did the tb fit the K&N air intake?
@just-a-61765 жыл бұрын
yea i did all this a while back this a must do definitively makes a difference, kenny did mine also hes good at it get with him
@Sameres1235 жыл бұрын
bandido lfx yeah it might a huge difference.
@kennycamaro23614 жыл бұрын
bandido lfx thanks bro! Glad you like it!
@FORD150-5.45 жыл бұрын
I have the exactly same car I love this car man I have injen intake and dual magnaflow quad tip
@achece67463 жыл бұрын
What can I do if I disconnect my battery before installing and once I turn it on the idle was so bad and i wasn’t able to drive it anymore
@pibe87612 жыл бұрын
Did you honestly notice a performance and response gain from the ebay intake? Reason I'm asking it's because I don't know if the expensive ones are worth the extra money. If the ebay one works for less than half the money, I could just build a cover to paled on top of shield. Thank you
@josephlara77682 жыл бұрын
What size coupler would I need if I have a KN cold air intake and I got the 80mm throttle body?
@billynelson68053 жыл бұрын
This plugs to that,that goes to this, tbis goes to here and that goes to this amd that should do it, great technical video🤣🤣
@Sameres1233 жыл бұрын
I install paint protection film for a living lol. Gimme a break. I barely put all of this together 😂
@Elmo8335 жыл бұрын
Great video, looking to do the same upgrade hopefully soon.
@tylerbrooks8708 Жыл бұрын
I tried to order a 80mm tb but they never send mines … I tried twice
@99rikishi3 жыл бұрын
would i be able to put the same manifold in my impala lt? has the same lfx engine just FWD
@curtisolson29304 жыл бұрын
How long did it take for it to come in. I ordered mine about two months ago and it still hasn’t came in yet
@TheBryceJohnston Жыл бұрын
What’s the difference between ported and non ported
@suchabeast245 жыл бұрын
Nice video bro fr 🤙🤙 Chevy gang 🔥
@FORD150-5.45 жыл бұрын
Man add the catch can is really work
@Suzuki_7eV3 жыл бұрын
Thank u I’m looking into this
@HectorGonzalez-bb7bm2 жыл бұрын
What are the torque specs for the throttle body?
@Natrocks03 Жыл бұрын
You ever find out?
@chunksdiaz38783 жыл бұрын
Bro can you send me the link of the 80mm throttle body of where you got it at please bro? I’ll really appreciate it
@wheelspinner2335 жыл бұрын
Oh very nice video!!
@Sameres1235 жыл бұрын
WheelSpinner23 thank you sir!
@KrieseTV4 жыл бұрын
Will you need a tune after this upgrade?
@Sameres1234 жыл бұрын
Kriese TV not necessarily however it make the car run smoother and you’ll get the most power out of the setup
@KrieseTV4 жыл бұрын
@@Sameres123 Oh Ok thanks! I just realized, your the guy in the facebook 5th gen performance thread asking me about my hp gains on my from my cam upgrade on my v6..lol small world. But my car is pushing out around 360-370 at the wheels. That's with the cams and the other mods.
@adolphusjenkins13344 жыл бұрын
Can anybody tell me the torque spec for the intake
@Fr33man19883 жыл бұрын
Hey Man…how much power did you gain?
@wilberalmanza84613 жыл бұрын
Hey man, where did you get your imported manifold
@alloyspeed18894 жыл бұрын
how much quicker does it feel?
@Sameres1234 жыл бұрын
lot more torque in the midrange
@youngboy30045 жыл бұрын
where did yu get that coupling from? did it come w/ the 80mm throttle body from overkill?
@Sameres1235 жыл бұрын
Dalton Allen it did not come with the 80mm throttle body unfortunately. You will have to buy a larger 90 degree silicone elbow that will fit your cold air intake.
@youngboy30045 жыл бұрын
Samer Sbaity thank yu
@MTFL0074 жыл бұрын
Does it sound better or different
@Sameres1234 жыл бұрын
you can hear a lot more induction noise
@SupersusSS6065 жыл бұрын
Would you prefer the overkill tune or just taking it to a Dyno?
@Sameres1235 жыл бұрын
Black.Hippy overkill tune for sure because on a dyno, you’ll get one tune for your mods and that’s it. With overkill, you get unlimited tunes. So we with every mod I add each month, I get a free retune. Best bang for the buck
@ericchijr8223 жыл бұрын
Wheres the link for the throttle?
@jermainecooper97094 жыл бұрын
How can i get in contact with you about getting a ported intake?
@oldblood_eyes4 жыл бұрын
nice vid man. watching this because I just bought the extendolator and throttle body so just wanted to see before hand how it would be to install. pretty easy
@Sameres1234 жыл бұрын
Raúl it’s not hard at all. Took me an hour
@oldblood_eyes4 жыл бұрын
@@Sameres123 cool. so how have you been liking the 80mm? do you think the tune is necessary since you said computers wont learn after a while? I ain't trying to spend extra money for a tune if it isnt necessary lol
@Sameres1234 жыл бұрын
Raúl just make sure to unplug your battery before disconnecting anything. And reconnect the battery only when you’re fully done with installing everything. It’s going to idle weird at first and will take some time. You’re just not going to get the most out of your performance gains without the tune
@oldblood_eyes4 жыл бұрын
@@Sameres123 hmm ok so seems like you would recommend a tune. well I'll see once I get my throttle body and extendolator and see how it runs. another question, just saw your SS intake install for your maro. do you think it's better than say a K&N cai? K&n doesnt require tune but SS intake does right?
@oldblood_eyes4 жыл бұрын
@@Sameres123 sorry for all the questions btw! just really excited on making more power for my car lol
@DavidSanchez-lp3si4 жыл бұрын
U didnt use anti seize grease for ur manifold bolts or torque them down?
@febinfofficial5 жыл бұрын
Good one mate. U got a new subscriber..i own a 2015 camaro V6. Id like to have these in mine as well..how much do you expect to gain from a throttle body only upgrade?
@Sameres1235 жыл бұрын
febz thanks so much for the subscribe! Also gains from the throttle body upgrade vary if you are tuned or not. However, someone with a impala lfx put the 80mm throttle body and gained 10 wheel without a tune. So it’s a very good upgrade.
@febinfofficial5 жыл бұрын
@@Sameres123 thanks for the info..do u any seller who ships to middle east? I'm in uae..i couldnt find TB for a v6 camaro on local shops.
@great4ever8454 жыл бұрын
Ok so throttle body os bigger but at tne acraul intkae manifold sounds like wasted money
@rcfeleo5 жыл бұрын
Do you need to disconnect the battery before doing that?
@Sameres1235 жыл бұрын
You do not really have to. The computer will freak out regardless and give a rough idle for about 30 seconds and driving will be quite rough afterwards. However, the computer will slowly relearn the new parts and after 175 miles of driving, my car is completely smooth.
@rcfeleo5 жыл бұрын
@@Sameres123 thanks for that info. Great job. Keep us posted on your ride...
@dketcham-sparky3 жыл бұрын
Where can I get a 80 mill throttle body? Overkill doesn't want to sell me one for some reason.
@joeyballotta88783 жыл бұрын
Overkill sucks! It took almost 2 months for me to get my throttle body and Will is almost impossible to get in touch with! Try and find another retailer. Good luck!
@Sameres1233 жыл бұрын
Check out “Kenny Camaro Roberts” on Facebook.
@FORD150-5.45 жыл бұрын
What the difference between the stock intake manifold and that other manifold you install?
@Sameres1235 жыл бұрын
AUDY PEREZ the other intake is ported. More air = more power. It really compliments the 80mm throttle body
@FORD150-5.45 жыл бұрын
@@Sameres123 ok thank you man I want to see dyno number now please I want the same setup on my camaro 💪💥🔥🧨
@FORD150-5.45 жыл бұрын
@@Sameres123 were I can buy one from the intake manifold and throttle body 80mm ?
@kennycamaro23614 жыл бұрын
AUDY PEREZ contact me on Messenger, Kenny Camaro Roberts
@philp46432 жыл бұрын
@@kennycamaro2361 are you still doing the intake manifolds?
@d0los5083 жыл бұрын
i like this man. he has a camaro. he does mods... in his underwear. with no shoes!
@SSMatt814 жыл бұрын
Did you get the manifold spacer too?
@Sameres1234 жыл бұрын
Matt Cook unfortunately not
@alejandrocalderon75 жыл бұрын
Bro so I did my TB and intake, did you get slight revs when changed??
@Sameres1235 жыл бұрын
ALEJANDRO CALDERON yeah it was revving so weirdly at first and it still is after 300 miles. You really need a tune to get rid of that and to get all the gains out of it. I’m waiting for my retune from overkill
@Sameres1235 жыл бұрын
ALEJANDRO CALDERON yeah it was revving so weirdly at first and it still is after 300 miles. You really need a tune to get rid of that and to get all the gains out of it. I’m waiting for my retune from overkill
@alejandrocalderon75 жыл бұрын
@@Sameres123 I did mine yesterday Bro and its settled more then it was, I get a slight rev while in Park of 600 to 1000 rpm @ times. But runs GREAT in gear and Better throttle response! Thanks for your Reply and your Video! Good Job!👍
@FORD150-5.45 жыл бұрын
@@alejandrocalderon7 do you tune your do you fell any different on horsepower gain?
@alejandrocalderon75 жыл бұрын
@@FORD150-5.4 sup Bro, from ft worth TX, I'm a proud owner of the lfx v6 do your research for sure!! I can feel the torque and gains! If you have the same car and you do the same mods plus some, it won't disappoint you.
@crumblefest3 жыл бұрын
Should have done the filming all outside - in the light...
@ShadowF3053 жыл бұрын
What size is that couplet? Thank you 🙏🏽
@Qqqqq1234-z2j3 жыл бұрын
Did you ever get a dyno done ?
@Sameres1233 жыл бұрын
Yessir. 292whp/270wtq
@jpatrick2604 жыл бұрын
Have you heard from will lately?
@jamesrutledge19912 жыл бұрын
Can I buy your throttle body from you ?? I’ll pay good
@chunksdiaz38783 жыл бұрын
HEY BRO I GOT THE SAME YEAR CAR AND EVERYTHING CAN I GET THE LINK SO I CAN GET IT TOOO PLEASE BRO
@Sameres1233 жыл бұрын
Join this group on Facebook. And then look up “Kenny Camaro Roberts” In the group. He will hook you up. Just send him a message! facebook.com/groups/5thgencamarov6performancegroup/?ref=share
@MrDopegamer135 жыл бұрын
Whats The link to the Facebook group I had a bunch pop up?
Alejandro Guerrero his name on Facebook is Kenny Camaro Roberts
@xavierpadget7793 жыл бұрын
Hey boss man can you send me the link to the guys name on Facebook because I couldn’t find it because I’m trying to get one too for my car
@Sameres1233 жыл бұрын
Xavier Padget Look up “Kenny Camaro Roberts”. His profile pic is his red Camaro
@Z51MAELSTROM4 жыл бұрын
So, if I may ask how much did you spend on all these mods? I ask because I'm a '18 camaro RS owner. I've got the LGX V6 and it started at 335HP. I'm gonna be at 510HP(up from 432) after I get it back from the shop. I stuck a edelbrock supercharger on it with a stage 2 tune. Why bother with porting, and all these baby mods that are gonna add, what. 20HP total? 30HP total? Sure they're "cheap" but they don't really make that much of a difference? Why not stick a procharger, or a cheap turbo kit on it. Hell, use the Edlebrock kit I used. You'll still have a sleeper V6 and you'll be able to push up well above standard performance and even surprise people. These mods are "real" mods, let me make that clear. You're not doing the same crap people that shop at Autozone for vents and stickers do. However you're not getting enough horsepower gains to matter. My stock LGX rated roughly 275WHP on the Dyno You might be at 285? 295 if we're being generous? You can't feel a 10-20WHP gain.
@Sameres1234 жыл бұрын
King Orthocone so yeah I get your point. I first dynoed stock at 257whp. Then after everything was done, I finished off at 292 whp. I currently have put a vortech supercharger kit on the car and I’m making around 400whp. I just wanted to go baby steps
@Z51MAELSTROM4 жыл бұрын
@@Sameres123 Fair enough. I haven't seen any videos from ya with the vortec, and you should show it off! You should be able to match up against most (stock) V8's, if nothing else. You may not always beat them, for a variety of reasons but with 400WHP you'll be close.
@micdraypr18554 жыл бұрын
@@Z51MAELSTROM It's better to remove as many intake restrictions before going FI and easier to tune after, so I think he made good choices for the route he wanted to take.
@pz3atl117983 жыл бұрын
Have you had Any issues with your Edelbrock Supercharger? Also is the Supercharged V6 your daily?
@Z51MAELSTROM3 жыл бұрын
@@pz3atl11798 Yes it is my daily. No I've had 0 issues with the supercharger. It performs very well, is reliable, delivers smooth power when it spools up.
@infernolt76224 жыл бұрын
I've never tried working on the car in shorts and bare feet. Hmmm... interesting.