Post Dyno fixes and first test drive! It's Scary fast! - THE SKID FACTORY

Support us on Patreon: www.patreon.com/theskidfactory
Buy merch here: www.theskidfactory.com
Today on The Skid Factory, Al & Woody give some attention to the issues found on the Fairlane after visiting the Dyno last week. Fuel system, Idle control, boost control and torque converter are all addressed.
If you like what you see then Share it with your friends and don't forget to subscribe and hit the bell for Weekly episodes!
For updates keep your eye on The Skid Factory (TSF) here:
woodrigos?hl=en
theskidfactory?hl=en
TheSkidFactory/
turboyodatsf?hl=en
theturboyoda/
Please note: We like to make interesting car mods and show you how we've gone about it, but we can't promise that anything we show you will work for your particular car, or that you won't harm yourself, someone else, your car or your warranty doing it. Please be safe, be responsible and unless you know what you're doing, do not fool around with very serious machinery just because you've seen us make it look so easy.

[@theskidfactory]

New Merchandise available at www.theskidfactory.com

[@zekzorX]

would love to be able to buy Skid Factory fender protectors for when I am working on my cars..!

[@WickedMachineWorks]

Nic brooo

[@crispycris]

Just ordered.

[@mclarenjohnf1]

Was that nice pull done in the Australian Mexico?

[@mikejd5573]

Got it up on the plane bro 😂

[@dnick1981]

The thing that I like about Al and Woody is that both of them talk to you like you wandered in off the street for a look. No big TV show egos, just experience and passion.

[@frankjmckingswood7569]

I agree mate, boost ain’t even my thing, but I still keep watching.👍🏽

[@rotrmotr]

100% agreed!

[@ThmsPtrsn]

WHEW! When a person's been in a lot of fast cars and breathes a sigh of relief after a pull, you know it's vicious!

[@zachmartin9626]

Amen

[@braydenohalloran6744]

Was thinking the same thing

[@Triggy96]

"I got it up on the plane bro" 😂😂 that would have to be one of Als best lines yet

[@lisalouisekeen4191]

When Yoda sweares and has a bum tickle you know it's a monster. Love this car.

[@maxrockatanksyOG]

Al: Scratches chin; "Yeah, a tad more angry"

[@theskidfactory]

It was totally focused at the end!

[@mattgraham1983]

When did you guys upload this?? I see this comment and a couple of others from 1day ago but I've had the notification for less than 1hr... Yes I have clicked the bell, subbed and usually comment on every video lol love the work lads👍

[@sphinx1390]

@@mattgraham1983 Patrons get early access my dude.

[@dannymx9486]

What skid 😂😂 "wasn't me"

[@scottgiebler5858]

Nothing like pedaling it at 80mph

[@shanenorwell8580]

Can’t get over woody’s facial expression during the test drive😂. What a monster, love this car.

[@StandardBubbleBoy]

I also enjoyed Woody's "facial"!

[@someyoungguy6990]

His bung hole was twitching like a rabbits nose, and that's how you know it's properly quick!!

[@phrogman4654]

Woody needed an o-sh!t bar to hold on to.

[@Mach1048]

It's that look of: "What have we done?"

[@DOffio]

Woddy's was funny, but did you see Al's the 3rd time he moshed it? He looked like, "Oh shite, hope I can keep this out of the ditch!" lol

[@sireuchre]

"Gale Banks my master is, taught me much he has." - Turbo Yoda

[@SloppyMechanics]

gotta love that turbo V8 old boi float and go

[@hunterjohnson4954]

Matt I want to see you build a 1UZ and work some sloppy magic on it!

[@ShedLife]

"Got it up on the plane" 😆👌 Looks like it too! Haha so good

[@demonic477]

gale banks is one of the most underrated american treasure's when comes to making power from any engine . way back in the 60's when Olds wanted to turbo there car they went to him when Ford did super chargers on there trucks they talked to him even the Army and GM go to gale banks for more power out of there engines . his current passion is how much can I get out of a bone stock Duramax so far the answer is 912 HP . If you love engines and making power as efficiently and easily as possible you need to check out his videos . all of his work is backed by his scientific approach to making power no matter what it's from be it gas or diesel

[@jeffreypaulharper6283]

The 1UZ is only 262 cubic inches.

[@quickdraw881]

He definitely is , and most definitely a treasure to all

[@coolkidscarclub]

Best team duo on the tube at the mo imo

[@frankensteinsgarage9632]

When Allan swears at the cars acceleration then it must be impressive. Coz I don't think Al is easily impressed.

[@jamesw95]

Aside from the fact that Al is a fantastic mechanic and fabricator, he is just so damn pleasant to listen to, Thanks guys

[@copternutFPV]

45 mins of Skid Factory goodness. Cheers fellas 🤙✌

[@madsnoop7]

Just found this chanel ,real Aussie Media !!!!

[@copternutFPV]

@@madsnoop7 my go to channels, The Skid Factory, Mighty Car Mods, Cleetus McFarland, Fasterproms, Nugget Garage, Taylor Ray, PFI Speed and Boosted Boiz and a bunch of others.

[@shaunpc2512]

I absolutely love it when Al goes all techy on us, I’m building a Ford Sapphire V6 24 valve Cosworth with a relatively high compression and capable of 8500rpm running a pair of Garrett GT3082r turbochargers to add that extra bit of fire in its belly and I find it really interesting and incredibly helpful for my own projects. I’ll definitely be listening to Al’s advice and fitting a blowoff valve to try and keep the car in a good reliable running order. Thanks for the advice and keep up the good work 👍🏻 I’d just like to add, sweet Jesus does that thing rip, get me a plane ticket down under please and sign me up for a passenger ride. That thing is majorly impressive 🤘🏻

[@kinkdogg]

You know it's legit when Al reacts :D

[@damonlandsdown]

Is it just me or is this a more enjoyable channel than MCM? I really enjoy the chilled vibe and well informed information coming in

[@jonasthemovie]

damonlandsdown Why compare?

[@Apodalont]

Watching you guys both get pinned back in the seats when boost came on strong, I was crying from laughter! That car is badass!! Nice job on the build like usual!

[@dukeperformance9978]

Coolest 40 to the speed limit pull ;)

[@andersjjensen]

It was absolutely bang on. I counted the road side poles per second myself. Right to the speed limit. Lemon Squash?

[@SigmAnalog]

Why, hello there, AW11 up on the lift~! Hope that's a future series/review--I've always loved MR2s, but the first-gen models will forever be my favorite car in the world.

[@derickstiffs9051]

Yip and the good old trusty 4age's and ze's.

[@MajinTT]

Yup, pretty sure it's woodies too. He put a post up pulling one out of his yard, or his was white but he did comment it would be on the show in the future.

[@AttilaThebung]

Mr Poo's father

[@feral4mr2]

aw11 ftw! Best cars evarrrr

[@SimonTrent8000]

Aw11 owner here. Love driving it with my 7age 20v

[@richiemanchi7842]

This content is explicit... I got chills just watching those pulls(send), it took to long to post here in Texas..(time difference). Good job guys

[@creativegta]

Strangest thing I've noticed is I have the same scar as Woody in my left eyebrow XD But deadset this video Al has answered all my questions for a little problem I've been having. I'm glad he explained the drive pressure and bottlenecking of the turbo. I had made up a log manifold and fitted a external gate but since found to be blowing gaskets and not being able to keep the gate closed. I thought I had a dude gate or even stuffed the flow of my manifold but didn't account for the tiny bottleneck in my tiny turbo. Edit: Also ;) ;) Skid Factory Guard covers would be mint.

[@merlz89]

The face on boost says it all. That feeling is unbelievable when it hits you.

[@chrisrnz]

Easily my favourite Skid Factory video for ages. Details, explanations, spannering and some indecent throttle treatment. Great job.

[@jamesruralsparkynz3504]

I was genuinely smiling when you gave it the boot 👌

[@thecoxicle]

The back to back P-clips on one bolt are so simple yet I’ve been trying to think of how to secure two hoses for ages and never thought of it.

[@Brettj77]

How funny is Woody's reaction 😁 Keen to see how hard it goes at the track. Mint build v2

[@GlennnD]

With the Binky boyz this must be the best channels on youtube love it.

[@juhojalonen3046]

7:40 A nodding Al always makes me happy.

[@sean5comet]

It is gratifying to see hose clamps properly route and mount the fuel lines versus zip ties.

[@tomislavmarkalaus5780]

Great job as always guys! I also want to thank you for referencing Gale Banks. I'm just soaking it up like a sponge. So much stuff to learn...

[@beardbuilds5140]

I reckon there is a small round piece of drivers seat missing after the test drive 😝 .... but it sure is a rocket !!

[@rodjonker6778]

Faces changed on the second pull 😳😳👍🏻👍🏻

[@boosted07rodeo14]

boosted v8s and two stroke bikes always put a smile on your face

[@Torch4ya]

"I got it up on the plane, bro." 😂

[@araml.3138]

What a great way to start the week! :-)

[@assaultlick2169]

16:00 Not surprised one bit Al's a fan of Dale. Man is a wealth of knowledge and freely shares his 50 years of engineering experience with the world for free. Loving this build, you'd never see that engine in a Fairlane of here in the states. Cheers, boys

[@BMBAUS]

I had a ZC as a teenager in the 90's, but it was nowhere near what this beast is, what a great vid!

[@tobinkupe5558]

That’s gold stoked to finally see you guys test one of your builds 💪🏾🤙🏾

[@Procharged32]

The smile says it all.

[@StandardBubbleBoy]

Great episode boys. Keep up the good work.

[@jameskiem9266]

Love your work guys!

[@speedking72]

Great work boys!!!

[@Kelford-Cams]

Awesome videos guys, love sitting back and tuning in. Keep it up and it's great to see where our hard work ends up 👌🏼

[@fendel_]

Seeing a notification from The Skid factory always makes the day better. Best channel on youtube!

[@russssh]

Loving the vids fellas! Congrats on this beast, my god it sounds and looks fast!

[@AndyQuinton]

The reactions to the pulls are priceless.

[@bradburns8076]

Great work boyz,love it

[@mrdatsun211]

Awesome work lads love it, as always!

[@LongPeter]

Well and amused with “got it up on plane” 😁

[@darwonboyful]

Another brilliant series guys well done!

[@BrickNewton]

Gale banks is a legend, and what he doesn't know about turbos you don't need to know. Hes a gold mine of info. His latest vid taking about exhaust pressures is really informative.

[@redbeardr31]

So rad boys! Well done

[@yanick__]

Always cool to see an AW11 on screen 👍

[@ryantilley-general.shenanigans]

That GFB SV52 is a genius bit of kit👍

[@fendel_]

Wow! Amazing knowledge again from Al, love the technical content. The pulls were just crazy. The faces and the reactions to the pulls were just amazing!

[@detroitredwing919]

Nice ride 💪 much love

[@darcyjane1704]

Awesome stuff again guys!

[@TheRealMrCods]

That is definitely a dream car for me. Mint af 👌

[@HhhwwwAjababskaj]

Bloody good job , awesome to watch

[@nickgrech9634]

Awesome video lads!

[@tocsa120ls]

As we say in my home country: now it has enough power to back out of the garage :) Cheers boys! :) 36:25 oh it lays patch, nice

[@chrismcallister3603]

Awesome content yet again , very informative with loads on info on how and why .keep up the great work you guys do , can’t wait for the next instalment

[@Ripply774]

Finally! Setting in for a good view

[@TeamGambleBMX]

Awesome build, and the filming/craic/content/editing are all on point. The terror and glee during those pulls was very obvious and made for great viewing. More power to you guys! 🤘

[@Sfrrob1]

Simply, EPIC. Really enjoyed this build. Beautiful rig, and great work on the build. Perfect!

[@northeastrc2725]

Sick build good job boys

[@TokyoCraftsman]

Woody looks genuinely concerned on a few of them pulls! Thoroughly impressed, as usual.

[@glynkatkin]

He's probably gone for cruises in Benny's Cresta, and that Foxbody Stang with the Barra in it too.

[@leroydonnelly2909]

Another awesome episode 👍

[@65Coasty]

Nice lane change over the bridge hahaha. What a weapon. Love it.

[@alittlebitmoore]

Lovely build, and your camera work has improved lots over the years. Keep up the great work.

[@vnprstxyze]

well done lads, absolute animal

[@turtlemonkey69]

Bloody love it boys. Those pulls gave me a good giggle, solid

[@mobiusclean6440]

"Impressive" is the word today ;) Nice work again guys.Thanks for posting:)

[@JoeJoeMoto]

What a beast!! That thing PULLS!!!

[@Bravo21]

BADASS! ... Well done Gents.

[@SIMXIVH]

Holy cow those pulls looked bloody fast!!

[@thirstythrottle3847]

Such a great build, Keep up the awesome work. You guys are an inspiration.

[@steveblackbird5174]

Everything about this vid was epic!! Cheers Gents. Fairlane is insane.. Seeing Al smile was enough. Love the Channel!

[@fugemlpriks1876]

Struth!!! That is going a lot more than I expected. Definitely onto something there Al. 👌👍🍺

[@JSxxxxxxx]

Thanks for all the awesome content you guys - really helping with eternal lock down laid off life.

[@philmissy1]

You boys are on top of your game. Pleasure to watch cheers

[@mattyallwood]

Nice work guys

[@robertsawyer2986]

wow that is epic lads nice work once again

[@glenn9k]

Can't wait for that MR2, looks sick!

[@ianmansfield8885]

great build boys

[@michaelthorne1347]

Great editing, Woody!

[@richardharris492]

Great video guys

[@johnsmith-qz4bv]

awesome work guys ......love the content...stay safe

[@OriginalRangsta12]

Great episode! I was thinking of Gale Banks when you started talking about that subject too

[@rjl110919581]

THANK YOU FOR GREAT DETAIL VIDEO ON YOUR SUPER GREAT BUILD

[@smee1198]

Good to know more about Gale, I'll have another look. I originally subscribed to him for his investigation into rear diff housings and how they affect the lubrication of diffs. Interesting stuff and yes very knowledgable bloke.

[@crowiesnest]

Love it boys !!!!!! So much more technical explainations gave a super understanding of what you did and why !!! So good . Keep it up and more of the same !!!!!! Best video you have produced ever !!!!👍👍👍👍👍👍👍👍

[@moxyface267]

That was so Rad. That last pull almost put Woody on the dash when ya let off. Go Al Again that was Raaaad

[@spoogie35]

Good to see that you guys care about the end customer and respect their budget. Not everyone does, unfortunately...

[@MrGixxer1300r]

Good stuff not cheap!!! Awesome build!

[@DMSparky]

That’s so funny that you mention Gale Banks you were reminding me a lot of him when you were talking about turbo restriction.

[@_ThatGuyGus_]

Epic as always boys ❤