Рет қаралды 29,572
Shooting location cooperation: Mr. My Pit Gifu
*In the case of twin motor specifications, there is a possibility that unexpected troubles will occur because loads will be applied to all parts.
Front and rear gear ratio, motor, ESC, battery specs as much as possible
I think that the load on the drive system will be less if you match the front and rear.
Even so, there are dangers such as damage due to load and heat generation in the electrical system, so please be careful when making it.
body
・HPI ESCUDO
Discontinued model
Chassis used
・TAMIYA 1/10 FF touring chassis [FF-01 chassis]
*Discontinued model
・TAMIYA 1/10 4WD touring chassis [TA-02 chassis]
*Reproduction may be sold as a special RC product.
Mechanics used
・Motor TAMIYA Superstock BZ motor (23T) x 2
・ESC G FORCE SPORT BRUSHED ESC
Old model (body is blue) x 1
Current model (body is silver) x 1
* Both are current models.
・Propo Sanwa MT-S
gear ratio calculation
Primary reduction ratio = Fraction of spar ÷ Fraction of pinion
Secondary reduction ratio = differential ring gear / bevel gear * Shaft drive
=Differential pulley ÷ Center pulley *Belt drive
Primary reduction ratio × secondary reduction ratio = chassis gear ratio
(Motor rotation speed per tire rotation)
Thank you for watching this time! !
I finally got it running!
I don't think there are any more words for this...
It turned out to be a really fun machine!
Have a fun and safe RC car life! !
Twitter: / chanyukarc
Instagram: Instagram: / chanyukarc
#radio control
#RCCAR
#twin engine