(picking 603) Reassembling a full euro cylinder lock with plug follower & pinning shoe

[@Potti314]

You might know this lock from kzbin.info/www/bejne/kHOoZXl3q9GWrNE where I picked and gutted it. In this video you see how I put it back together. have fun - it's not so difficult if you own a plug follower with a slot and a pinning shoe.

[@hamidhamid4100]

البحث في العناوين والنصوص

[@raulrojas6520]

😅😅0😊

[@josetrinidadromero7705]

​@@hamidhamid4100. De

[@PocketWomen]

Very interesting tutorial. I've always wondered how the two sides were done at once. Thank you for doing this video, cheers

[@Potti314]

Cheers mate, glad that the video was helpful.

[@LockNoob]

This will be an incredibly useful video for many many people. I’m glad you did this without a front loader too :-)

[@keithroberts5946]

where can i get a front loader from - I have seen them in use but cant see when to buy one

[@Potti314]

Thank you mate - the front loader is great if you don't wanna gut the other side.

[@Potti314]

I found something here thinkpeterson.com/universal-top-loader-in-a-tube/

[@keithroberts5946]

shipping to the UK is expensive - total for tool and shipping is $87.00 - can't afford that for a single tool If I can find a similar tool for less

[@Potti314]

It was just an example, foxxxy has 3d printed it. Others have also made them themselves from sheet metal. Or maybe another commercial source has them also. Good luck.

[@odinslockllc]

Great video. I had one today that required the front loader tool because the thumbturn side was not removable (without drilling), and your spot on about those cam pieces being different designs. Definitely need to pay attention when pulling apart so you know how they go back together. Thanks for sharing!

[@john.apricot]

You saved my life! I messed up with an euro cylinder like that one but now I can fix it. Thank you so so much!!

[@Potti314]

Glad the video was helpful.

[@JasonCarlson]

First time I have ever witnessed this full event! Thanks for the demo!

[@Potti314]

Haha, glad you had fun :-)

[@jokeeffe007]

This was a great video. I'm from the US and have reassembled many locks but never the Euro cylinders. It's the part that everybody skips on the videos because it's not sexy. Thanks for publishing great content!

[@Potti314]

Thanks, glad you liked it. For me it's part of the fun to get them back together.

[@ahmedabdullah6778]

Excuse me, where can I buy the kit I used in the repair?

[@keithroberts5946]

Great video - very useful to know how re-assemble - most videos show how to gut a lock but not how to put it back together - especially if it is a double sided euro lock

[@Potti314]

Thanks. Glad you found it useful - it's part of the fun to to get them back together ;-)

[@Leonslockpad]

Very cool video my friend very nice fun to watch👍😊👍😊😎😎

[@Potti314]

Thanks buddy, glad you had fun watching.

[@yankostrehin3788]

❤❤❤ EXCELLENT JOB,MY FRIEND!!!THANK YOU VERY MUCH!!!❤❤❤

[@WilliamMancel]

Thank you for doing this video my friend. I have a full Euro now, and it's nice to see how to put one back together. I've watched other videos on how to do this, but none recently. I have all the stuff to do it, just never got around to doing a full Euro.

[@Potti314]

Thanks buddy and good luck, just give it a try. I can send you plenty of euro lock when you mess up yours ;-)

[@Mur-lock68]

Excellent Video Sir! Very Well done! The pinning shoe really works here! thanks!

[@Potti314]

Thanks a lot - glad the video was helpful.

[@62Cristoforo]

Very helpful. Exactly what I was looking for.

[@abdallaelhagef1090]

Thank you for this video and I hope to make one about built cylinder and pin &pin tumbler thank you

[@Potti314]

Thanks, I'm subscribed to get notified once you upload.

[@CameronDunn]

Excellent walkthrough. I've always been hesitant to gut full Euros, but you made it seem easy.

[@Potti314]

Thank you - this one was easier than the average but you need to try it yourself to gain experience ;-) It's just pieces of metal, not a piece of art ;-)

[@aimmaturrohman2374]

​@@Potti314 alatnya yg ingin saya punya

[@clarencelthorpe314]

Excellent vid. Answered all my questions. Thanks

[@Potti314]

Thanks for the kind feedback. Appreciate it.

[@moturist1]

This was very helpful! Thank you!

[@tegarsatriaprayudha3613]

anjay makasih bang tutor nya, gajadi diomelin bokap grgr kunci pintu slek😅

[@lockmania-locks]

Very cool, i have had hard time with these euro cylinders

[@Potti314]

Thanks, many other euro locks are harder because of the cylinder length and different cam mechanisms - it's part of the fun ;-)

[@lockmania-locks]

@@Potti314 yes it is, i myself strugle a bit with my ruko's but i don't have the right tools yet, but the padlocks and mailbox cylinder's are easy

[@Pinekatze8814]

Where did you get the plug shoe ? Very nice and small

[@BalbasorCacs]

i have a problem, when i removed the clamp and try to take out the plug the key got stuck in the cylinder and they both got stuck. Do i need to remove the second clamp or is my lock broken?

[@paulb9769]

How could you change the combo to change the lock. How would you match a new key?

[@TheIronHeadRat]

Thanks for sharing 👍

[@joshuag.newsteder6284]

What happened to the single ball bearing please?

[@jonathanalty2478]

Can you make a video where you install a button or a thumb turn to a cylinder lock please

[@Kingisraelite]

Please how do I get the follower and pinning?

[@chriscapune7873]

Very good information!! Great video!!!

[@Potti314]

Thank you, glad that it was helpful.

[@colin.charbel]

Hi, would you use the same method if there were a ton of security pins in there?

[@ahmedabdullah6778]

Thank you, wonderful

[@bhaveshpatel3299]

Hi I was wondering were you got your spring holder from

[@dkeisk]

Would you give links Where to buy a pin kit in Europe?

[@aszabolcs1]

Thank you for shared!

[@molnarrobert1893]

I did it without any specialized tools,only a flatened spoke and grease to hold the pins.

[@ВикторЖура-т9ш]

А как достать внутренность, если ключ не проворачивается? Возможно пин застрял.

[@John-kb9im]

Thanks for sharing.

[@naseemkhan7645]

Very good tring

[@obijanjebrave]

To bad that rest of manufactures does not use spring steel c-clips. Nice work :-)

[@Potti314]

Very true; these spring steel clips are very easy to handle but most likely a few cents more expensive.

[@scottmcgregor158]

Great video, I have been struggling to pick a full Euro cylinder lock,and would like to strip it down and reassemble it ,using only the key, (without having to pick it) thanks for the information

[@rojasroyan2883]

Good job , thank you ....

[@curthatt6461]

Great video.

[@Potti314]

Thank you.

[@azezzakary4876]

Good job

[@mdshorif-dz6qp]

6:35 tools name pls sir

[@youcefgheddari8400]

Woooooooooow Very very very gooooooooood

[@EnzoGuardino]

Exceptionally clear and educational tutorial! I've got the locks, just need the tools, patience and a little prayer to gut them. 👍 Is the pinning shoe you used homemade? I'm curious to see if I can make something similar from my "scraps" collection. 🤔 I really need to get my hands on Dremel type tool.

[@Potti314]

Haha, don't pray too much, just try it. Old euro lock are not hard to find and are cheap. I've messed up one or two but that's part of the thrill ;-) Have a look here for a home brew pinning tool kzbin.info/www/bejne/gYGQaoaagM6hsKc It's made from a windshield wiper blade.

[@Evodem10]

Hello! What kind of nipper I can use for reinstalling the clips?

[@Potti314]

With the spring steel clips it's easy kzbin.info/www/bejne/rp7MZJKHrNSkoKs But for these bendy ones, special pliers exit. But I'm not possessing these pliers so I'm just using two small screwdriver to tighten the clip.

[@Evodem10]

@@Potti314 Ok, thank you! ;)

[@nihatsavmaz6677]

super potti. du bist mir eine super hilfe.

[@Potti314]

Vielen lieben Dank. Klasse, dass ich helfen konnte.

[@ВікторОмельченко-з3ч]

Дуже корисні приспособи, буду знати, як зібрати сердцевину ключ-ключ. Дякую вам.

[@warsonowar-s7q]

Verry good

[@hiltihome]

Is this pinning shoe home made? Where to buy? (mine is inferior...)

[@Potti314]

It's from a locksmith but they don't sell these anymore.

[@ebra5919]

بسیار عالی 👏👏👏👏

[@Solichan1AsShiddiq1]

thks, good job

[@128mahmoud]

very very good

[@rikovaldi]

nice good job

[@gregtunston5162]

amazing thank you for sharing

[@Potti314]

You're welcome - glad you stopped by.

[@mounirellouze9128]

Merci c'est bien expliqué .

[@jlpeniza3178]

6 pin repinning where you can buy

[@Potti314]

Check HUK, Sparows and Peterson.

[@MostafamohemadHashem]

هل البليه لها وضع ام عشوائ

[@jacintovillarreal5582]

Los vidio con traducción al español 👍 Sería muy bueno

[@antonio28360]

exelente tutorial hola hermano

[@Potti314]

Thank you.

[@antonio28360]

@@Potti314 esa herramienta ke metes dentro del cilindro es de que medida es de 1/2 pulgada

[@tinisuhartinitini-ph6dg]

Mantap coy

[@tayebgattal-pl9fw]

شكرا

[@devarajang5488]

Except the tamil lagunitas sir thanks

[@tamersaab543]

Nice

[@Potti314]

Thanks.

[@drisdris1461]

فكرت رائعة

[@abdel-hadikaddourn2bricola725]

شفت جنون تاع المفاتيح كيفه إديمانطي

[@Potti314]

Thanks for watching.

[@ashrafroshdy1292]

الترجمه تحجب الرؤيه الكامله

[@hussainzid489]

Goooood

[@sayafahmed1169]

Gooood

[@ابانوبجمال-ج6ص]

فنااااان

[@hamzahamza-po9yx]

رائع

[@stevenevin9003]

I would like to send you a pic and see if can give me some advice?

[@МихаилФ-ъ5л]

Как то ты легко удалил кольца-я два дня не мог и повредил корпус

[@wamoety123]

gr8

[@aymnhassan5910]

فديو جميل جدا بس ياريت ترجمه عربي

[@JelMain]

One of the funniest AI voice transcriptions yet - ELCA became a well-known Islamic terrorist group!

[@mohdzaker6654]

I don't need to do this on my work

[@hokkaizer]

Ini yang gua cari

[@ashrafibrahem8318]

Mona Salama

[@hadjiguiyaume6199]

Thinck

[@abiymulat4794]

Ml

[@jonwallace1253]

Ba bye

[@Potti314]

Haha :-)