Pouring $7600 of Resin in a 20ft Table

This is the biggest table with resin that we have ever done! It's 20ft long, 255L of resin, and it has $7600 of resin in it, which we did in a single pour!
Get a Custom Table Quote Here:
docs.google.com/forms/d/e/1FA...
Buy Our Black Forest Resin Here: blackforestwood.com/collectio...
Buy our Black Forest Ceramics here: blackforestwood.com/collectio...
Instagram: / blackforestwoodco
Facebook: / blackforestwoodco
Website: blackforestwood.com/
TikTok: / blackforestwoodcompany

[@johncotton866]

Thanks for the great video!!! This table should be fantastic. We appreciate that you let us watch the creative process behind your business success. Looking forward to the next video!!!

[@BlackForestWoodCo]

Thank you as always John! The constant support makes it all worth it to us 😁

[@gregdennis3523]

That table will be absolutely amazing. Would love to see the, from start to finish. Life isn't about the destination, it's about the journey

[@BlackForestWoodCo]

Coming soon 😎

[@green3452345]

I work in a Granite shop and this video made me pucker many times. Y'all crazy as hell lol. I would NEVER stand under a slab or a table that big. All in all tho awesome work!

[@brucemaher7621]

Don’t worry I was holding my breath a couple of times when the slab went up and down... the most I have ever been worried watching a wood slab video... you have done 20 ft ..I have done 20 inch...wow thanks again boys

[@BlackForestWoodCo]

Haha we were holding our breath too! Thanks Bruce!!

[@davesch1512]

Looks amazing so far Can you show installing the c Channel and show the theory on placement and how many C channels to put in

[@BlackForestWoodCo]

Yes we will show that!!

[@davesch1512]

Awesome thanks

[@farmhandluke5182]

Beautiful slab of wood , look forward to seeing the finished table , great teamwork maneuvering that huge slab from milling to pouring👍 Charlie was on a skating rink on that table top! 🐶😊 thanks for the video!

[@BlackForestWoodCo]

Thanks Luke! The move was definitely a little stressful haha

[@stevenraymer904]

Keep up the great work i can’t wait to see your beautiful table at the end Charlie keep them in line

[@BlackForestWoodCo]

Thank you Steven!

[@cattac6]

Terrific job, surely this must be the biggest table you can make without moving to even larger premises. Looking forward to seeing the next stage and what type of leg and support you are making for it. Beautiful slab of Walnut and you are doing a great job of bringing it to perfection. Well done team. Cheers,Michael.

[@BlackForestWoodCo]

Thank you Michael! We might just have to make some changes if we keep getting orders this large. We’ll be doing steel legs in this bad boy!

[@carleenpring3404]

A mammoth job like that one can only be achieved with team effort, so well done to all of you! Looks like you have a great bunch of guys working with you, Dylan. This table is going to look wonderful. I hope it's owner gets many years of enjoyment from it. Hi from Australia

[@BlackForestWoodCo]

Hey Carleen! Thank you so much for the kind words. Our team is really enjoying themselves on this one 😁

[@BJEurekaSprings]

WOW. Gorgeous piece of walnut. I have always liked your selections of materials.

[@BlackForestWoodCo]

Thank you!! We feel lucky to work with materials like this!

[@jumpingjacks5558]

That is really something. Thanks so much for sharing. Looking forward to the next video.

[@BlackForestWoodCo]

Thank you for taking the time to watch!

[@alme6743]

I like the Mac Miller instrumental nice touch 👌👌

[@BlackForestWoodCo]

Haha I think you're the only one who noticed

[@maddieadams75]

This table is going to be amazing, the smoke tint she look beautiful with wood ♥️

[@BlackForestWoodCo]

Thanks Maddie!

[@bigraymie]

That CNC machine is worth its weight in gold... Roll on next vid.

[@snycustomworks7390]

can't wait for part2 and final result..

[@BlackForestWoodCo]

Us either!!

[@HowIDoThingsDIY]

This is insane! I can't wait to see it finished!!!

[@BlackForestWoodCo]

Couple more weeks and she’ll be done!!

[@paulfowler3416]

goodness, heart in mouth moments with the forklifts - H&S would have collywobbles.

[@BlackForestWoodCo]

Shhh 🤫

[@driftwoodworks8172]

5:03 most satisfying noise

[@BlackForestWoodCo]

De-moulding is so satisfying 😍

[@jeanhorne5893]

Thank you for sharing everything.Can’t wait to see it finished.God bless you all.

[@BlackForestWoodCo]

Thank you very much Jean 😁

[@bill48m]

huge effort by all, be waiting for part 2

[@gregorysquires2685]

THAT......is impressive!!!! Has a customer ever shipped a slab to y’all or do y’all just use the wood you buy?? What’s the largest round you’ve completed?? Great video as always! Have a great weekend!!

[@BlackForestWoodCo]

Yes we have done that a few times! We actually have a customer who will be shipping us a gorgeous slab of mango wood soon. Largest round so far is 6’, buuuuut, we have a 9’ round coming up very soon 👀

[@graciemaca6996]

I would love to see an odd-shaped table with pour-resin. I ❤️ the unconventional look of unusual shaped tables & other furniture, but not freakishly odd.

[@madeleinemuller1445]

So impressive guys! Beautiful 👏🏼👍🏼

[@BlackForestWoodCo]

Thanks so much!

[@adriank9234]

looking awesome at the moment.

[@ahmedalgendy0091]

As always you guys nailed it great job on that massive table and really looking good right now waiting for the finished product 😃

[@BlackForestWoodCo]

Thank you Ahmed!

[@chekymonkey4452]

great work and great to see Charly

[@BlackForestWoodCo]

Thank you 🐶

[@fnordeon1013]

This is amazing work ❤ I cant wait to see the rest. Great to see Charlie again as well, I love that guy doing his work 💕

[@BlackForestWoodCo]

Thank you! Yes, Charlie is a good worker haha

[@graciemaca6996]

You all deserve credit as you work together so well in whatever capacity. 👏

[@bollox57]

Absolutely epic, great job guys👍🇮🇪

[@Ethan-qe8pe]

The polishing guy,"screw this I'm out."

[@BlackForestWoodCo]

🤣

[@fnordeon1013]

😂😂😂

[@ScottRedstone]

What is next? River table for an aircraft carrier? It must be fun and rewarding to work in your shop. Hi Charlie!!

[@BlackForestWoodCo]

Naturally I think that would be the next step 😜 🐶 🐾

[@ryanc8188]

Nothing better than a shop (_______) this big and have a project that (_____________) big and figuring it on the fly 👍

[@BlackForestWoodCo]

You gotta do what you gotta do 😎

[@Sickmonkey3]

Man, I can't wait to see how this one ends up looking

[@BlackForestWoodCo]

It’s going to be something special 🙌

[@roberta.brokaw3829]

The resin just enhances the grain of the wood. I can honestly say I am jealous of the owner of that table. Lucky client excellent craftsmanship. Curious? You call your father Brad - is that for the video or is he okay with that - LOL. Can't wait to see the next step for the table and I'm going to guess steel legs for that behemoth? Stay safe to your whole crew and Charlie.

[@BlackForestWoodCo]

Thank you as always Robert!! Haha I just call him that for the video. Yes steel legs! We will be using 4 legs so there is no risk of it sagging.

[@alexandersangster7137]

Amazing table guys can’t wait to see the next video! Thanks for showing your flattening process. I was in asking about that. Im having issues with mine lol

[@BlackForestWoodCo]

Thanks Alexander!

[@jacquiemouton9053]

Would have loved to have seen the tree it came from. Watching young Prince Charles slipping on the table was hugely entertaining, worth the wait. Looking forward to next week. Take care all. x

[@BlackForestWoodCo]

I know, me too!! Thanks as always Jacquie 😁

[@timdyck8492]

So maybe next time I come to Calgary I can help out on a build 🤷‍♂️ that’d top the shop tour you gave me last year 👍 way to overcome the challenge !!

[@chrisshannonmoeller781]

I have no idea how y’all are moving that aircraft carrier- size table. Can’t wait to see you try to ship it...

[@BlackForestWoodCo]

We’ll likely use a dedicated truck to take it directly to the clients home 😎

[@sapperdeflap]

Very curious about the next part!!

[@BlackForestWoodCo]

We'll show it when it's done don't worry!

[@sapperdeflap]

@@BlackForestWoodCo No worries, it's just that i'm curious about how this ends, in the mean time, keep up the good work, i'm amazed about the craftmanship and all steps in making this beautiful furniture...

[@theresagrosscup1968]

Dylan do you know anyone with a lathe? There is a guy I follow I think he resides in England He makes really good bowls and other stuff. It really cool he uses resin with wood. But the cool thing is he started taking a bunch of colored pencils and resin if you want to check it out I can get you the link. That table every time you guys move it I want to cover my eyes. It’s size is unbelievable you are doing it in one piece.

[@BlackForestWoodCo]

We actually have some lathes our self!! I think i’ve seen the video you’re talking about too, we actually really want to try something like that! Haha it’s very stressful for us when we move this too

[@jamesbarisitz4794]

What a clean piece of timber you got to start with. This will be epic. ✌

[@BlackForestWoodCo]

Thank you James!!

[@DallasGarage]

That table was a monster to move!

[@BlackForestWoodCo]

Sure was 😎

[@graciemaca6996]

So far, it came out looking great! Wow! I'm wondering how large the clients space is to put this massive piece in??? Maybe in a royal ballroom? 🤔 I would never keep it outdoors, even tho covered by a roof. Whoever ordered it has excellent taste! Nice that they gave this job to you, a trustworthy & reputable Company. You will go far with projects such as this! 👍

[@welderman1221]

INCREDIBLE !!!

[@BlackForestWoodCo]

Thank you!!

[@klashnacovak47]

The 12 thumbs down are from the forklift drivers and the ones that had to manoeuvre it. Great video as usual.

[@alfredthor1218]

I'm sure it's going to look amazing

[@BlackForestWoodCo]

Thanks Alfred 😁

[@gabrielpursley2812]

Amazing work! and looks like the charlie got a groomin! Lookin fresh like the table!

[@BlackForestWoodCo]

He did!! Thank you Gabriel 😁

[@gabrielpursley2812]

@@BlackForestWoodCo I definetly was cringing when ya'll were bringing the table back down after the resin tho! That is some lennnnngth and weight O.O

[@danbatten7228]

If this was in the UK, health and safety would’ve had a field day.

[@camille.c]

would a crane-style ceiling hook hoist help? since you do an insane number of large tables

[@BlackForestWoodCo]

It probably would!

[@danielseverson9565]

You would need to find one able to withstand the weight, and have enough maneuver ability! As well as cost effectiveness! There is also available overhead space, can the ceiling hold it? Do you need to strengthen the ceiling? There are allot of factors to take into consideration. The number one consideration is safety! Can a crane system remove the chance for injuries? Those men coming out from under the platform above, just to the side, but under the table is not smart! Along with no hard hats is one that should not happen! That's one hell of a chance there taking! I wouldn't allow that to continue! Have them go off to the side along the wall before the lift!

[@ThisIsMyYouTubeHandle69]

You guys are the gods of epoxy resin.

[@BlackForestWoodCo]

😎

[@tahinde]

Who ever ends up delivering the table is definitely going to earn their paycheck, get many of these and you guys are going to have to get bigger equipment. Hi to every one and thank you for another great video.

[@BlackForestWoodCo]

Thank you so much!! We’re kind of relived we don’t have to deliver this one haha

[@adiringer1959]

This is very cool! You mentioned you over-pour to fill in cracks and voids in a single shot, but isn't that a tremendous amount of waste? Or does it save a lot in other ways?

[@BlackForestWoodCo]

Thank you! For us it makes sense as it saves us time and we have higher over head costs that the typical hobbyist. If we don’t over fill, we have to individually fill in all of the smaller cracks and voids, which is very time consuming. By over pouring, we do spend more on resin but can completely skip the filling stage!

[@richardlaymance9984]

That is impressive

[@BlackForestWoodCo]

Thanks Richard!

[@kirkglover3350]

Would like longer videos

[@BlackForestWoodCo]

Thank you for letting us know!!

[@markmoulin41]

How do you dispose of all the scraps, sawdust and resin residue? I make small charcuterie boards and have quite a bit of residue so I would imagine you guys have tons (literally). Thanks. Love and am inspired by your videos.

[@Ofthe7thSon]

Wow, amazing job so far. That’s gotta be a bugger to install in wherever it goes. Safe bet the new owner doesn’t have a forklift….

[@BlackForestWoodCo]

It’ll probably take about 20 people to move this thing in haha

[@SingerGuy59]

What an amazing project to get to be a part of. Does the wood have any special meaning for the customer, or did they just have size requirements that you were able to meet?

[@BlackForestWoodCo]

No special meaning! Just a really massive piece that worked for them!

[@debbiepoole2247]

WOW!!! I watched that with my jaw on my chest. I even held my breath when you moved it upstairs, and down again. What is the full weight of the table?

[@BlackForestWoodCo]

Haha so was I!! The slab alone was about 1000lbs and then we added about 600lbs of resin 💪

[@debbiepoole2247]

Your muscles came in handy then. Food job Charlie wasn't on top, you wouldn't have been able to lift it. 😂😂

[@lactatinglobstr]

Do you guys always de-gas your resin? Man that table is gonna be EPIC! cant wait to see final result!

[@BlackForestWoodCo]

Yes we do it for all pours!

[@lactatinglobstr]

@@BlackForestWoodCo worth it for a single build? We are mid project to do 2 small maple live edge coffee tables 2" pour (my wife and I are gonna order your guys resin for it) going to full tint it black worth it? Or just hit it with torch and check on it as it cures?

[@frikkieschoeman7315]

[@BlackForestWoodCo]

Well our room is about 30’ haha

[@frikkieschoeman7315]

@@BlackForestWoodCo yeah, in Texas, game ranch with conference room... table length 39' would be perfect lol

[@oukas1995]

Really amazing work guys.. I wonder except the length and width how you choose the thickness ?? I mean do you calculate it to make the right thickness to prevent the curve by own weight ??

[@BlackForestWoodCo]

We are going to use for steel legs! We’ll have them evenly placed to avoid any sagging!

[@matthewransom6469]

What do you mean by degassing the resin? What does that do?

[@anemone9895]

I'm a plasterer. Why am I here?. Coz I like it!.

[@fnordeon1013]

I do renovations. Im here to because I love it 😊

[@truthh8322]

I am putting and epoxy River in a commercial bar. Do you think the two coats of osmo thin with the wax on that would be enough to protect it or should I just do a couple coats of clear epoxy over the topel of everything?

[@BlackForestWoodCo]

A polyurethane finish is probably best for commercial bar tops since the people at the bar won't be considering treating the table gently and will most likely get spilled on quite a bit!

[@truthh8322]

@@BlackForestWoodCo True. I wasn't sure how to apply it on top of the epoxy though. Any suggestions?

[@rage9278]

When will we get part 2 mate ?

[@BlackForestWoodCo]

Probably a couple weeks, we're working on it in real-time!

[@timsenger470]

Looks awesome. Almost too big moving around. Whew!

[@BlackForestWoodCo]

Haha I don’t know what we will do if someone orders a bigger one.

[@davidalisonhartman243]

Have your team tried one of the Surcare sanders? Supposed to be great for reducing sanding time on large horizontal surfaces. I'd like to get some experienced info before I buy.

[@BlackForestWoodCo]

No we haven't!

[@myk5486]

How are you degassing a 5 gallon bucket? I’ve not seen a chamber big enough to fit a bucket, I’ve seen 5 gallon canisters but they won’t fit the bucket.

[@BlackForestWoodCo]

We found a 20 gallon container on amazon!

[@scottstringham2997]

You might want to consider installing a gantry to move slabs up and down. If someone is seriously injured or killed it would be the end of your business. Just my 2 cents, as an armature woodworker I enjoy seeing you take on and accomplish projects that are way beyond my skill level and size.

[@BlackForestWoodCo]

We’ve definitely thought about something like that.

[@outerskies]

yuh

[@Schairiebwdifb]

It would be cool if you made a table for the navy and put a submarine in the epoxy...

[@wojtekp5684]

How long did this cnc process take?

[@BlackForestWoodCo]

About 2 full days!

[@peterpan2611]

Blacktail sent me here

[@BlackForestWoodCo]

We love Blacktail!

[@CK-oo1sx]

What does a project like this cost? My guess would be like $80-100k

[@BlackForestWoodCo]

$40K! Better buy two!!

[@atmony]

In not to long a table this size will be made out of Ancient popsicle sticks from the year 1973.

[@jthewino1]

Is there any truth to flattening both sides or it will possibly warp?

[@fnordeon1013]

That is a very good question. I hope someone of these great guys will answer you. Personaly, I have not had problems, but at the same time only worked with river tables of a max length of 3.5 feet.

[@BlackForestWoodCo]

We flatten both sides and haven't had an issue!

[@SeniResin]

Woow..ini sangat luar biasa 😍

[@lifewithCody_]

How many people to are actually employeed at the shop?

[@BlackForestWoodCo]

Just under 20!

[@comptegoogle511]

The mold is on the second floor? You should do some research on ''One item flow/ U-shape production line/ lean manufacturing''.

[@genewileyopa]

What do you think that table weighs? That is big. Iowa is watching :)

[@BlackForestWoodCo]

Maybe about 1600 pounds!

[@aytunch]

05:42 that big crack is not filled with resin yet

[@BlackForestWoodCo]

We will fill it up after!

[@jeanclaudebezzina]

I'm just sitting here wondering where the hell will this mammoth of a table will be placed lol, probably a huge hall or a one of a kind mansion

[@BlackForestWoodCo]

Yeah, we haven't seen the house it's going into but I imagine it's pretty big haha

[@Furbolg123]

The amount of bubbles always seems very minimal with your resin 💪. It is also not that noticeable with these coloured resins, but i was wondering what you do in clear castings. What if there are bubbles on the inside of the casting, so you wont be able to fill them? Do you ever have pieces that you have to discard because of clearly visible bubbles on the inside of the casting? cheers

[@graciemaca6996]

I would hope that discarding it would never be an option. Someone will love that piece regardless. One can learn to live with the seemingly imperfections & regard it as a unique piece. I know I would!

[@kurtc6372]

Wow. Right in the middle of watching, a rainbow appeared outside my window. I definitely like the smokey grey. Have you ever thought of trying to use rounded border boards making the table edge round. Or rounding the ends of the table. On a 5 foot wide table it might make it more comfortable to put two people on the ends. I know customers specify what they want but might be a good suggestion.

[@BlackForestWoodCo]

That’s amazing!! We’ve actually got a table coming up just like that!!

[@Jay-yr3kf]

“Check out our new $10,000,000 resin pour for the last people on earth who want insanely overpriced plastic furniture!”

[@photonashville]

Impressive how much work goes into it, but I don't understand the desire to have a plastic table. Can't wait for the epoxy table fad to be over.

[@johnlafrance2692]

Imagine having 40k to spend on a table

[@BlackForestWoodCo]

Right?! 🤯

[@coleullman5759]

Where is Spencer? Did he quit?

[@BlackForestWoodCo]

Spencer went for technical training at SAIT! He just finished 1st year and is back now!!

[@jrs1955]

Supervision by Miniature Schnauzer.

[@BlackForestWoodCo]

Very Important

[@AdzOwnz]

Comment for the algorithm

[@BlackForestWoodCo]

Thank you sir 😎

[@fkkmag8692]

Thats a big Moth@#€@*&€

[@JVHorvath1]

I mean 260 liters sounds like a lot .... but its only really 68 gallons

[@BlackForestWoodCo]

That is true

[@BlackForestWoodCo]

Same goes for our dollar compared to yours haha

[@JVHorvath1]

If you’d of said like 100 gallons id of been 🤯…. >.>

[@berndberndsen1915]

Alla ich will jetzt den Fertigen Tisch sehen :O

[@BlackForestWoodCo]

You'll see it soon!!

[@berndberndsen1915]

@@BlackForestWoodCo I Hope So 😍😍😍😍

[@teddywong6246]

Some customers have no taste. And that is why there is a market for wood encased in plastic.

[@ericdonnelly5824]

Can’t believe you guys got 7 thumbs down! What the heck for! Anyways that’s is some beautiful “wood”

[@BlackForestWoodCo]

7 people just don’t appreciate good wood 🤷‍♂️

[@lostandfound3588]

KZbin needs to cut its shit and stop recommending channels with only part 1 of projects posted and yes I will be back for the second part

[@BlackForestWoodCo]

I guess you’ll just have to come back🤷‍♂️

[@lostandfound3588]

@@BlackForestWoodCo and that's how you get subs, from good content

[@epiccollision]

I’d be more interested with the price of the table…

[@MacktasticSlick_]

I mean he says the price less than a minute into the video

[@bigofishbone]

So why didn’t you do your pour on the bottom level???...It would have been a lot easier I would think...

[@BlackForestWoodCo]

Our pour room with all the proper cooling requirements are upstairs, also dust would get into the pour if we did it downstairs

[@DonaldMelton]

if you people would do thin seal coats on there first , you will seal up everything and then you wouldn't be wasting so much resin . i would about bet that you wasted at least 10 gallons

[@BlackForestWoodCo]

We don’t over pour to be able to plane bubbles off. We over pour to save time by filling in all smaller cracks and voids in a single shot, as opposed to doing them one by one. Furthermore, sealing edges is one of the worst things you can do for a resin table when it comes to longevity. It greatly compromises the strength of the bond over time and can lead to separation. We have done many tests on this!

[@RebelForce8]

Plankk

[@mikaelthelin3508]

Great job guys!!! But why does you always have to talk about what is worth and what it cost? A good job as you guys do all the time can be priceless for the customer, so don’t let you down and fall into the trap where you have to mention $ all the time. Let your work speak for it’s self, and if anyone have any thoughts about that, let them try to do it themselves.... Keep up your good work!

[@morganfreeman5171]

40K for a table ? Fucking ridiculous.....