Power Button & Proximity Repair - iPhone 4 How to Tutorial

[@ravenswod]

you make it sound so simple, i gave people a step by step instruction, but when I saw your explanation I understood right away.

[@gitcom]

These videos have the most professional camera work I've seen, and makes it easy to follow. Thanks guys!

[@sysakPL]

After i managed to change the home button in mine (thanks to your excellent video!), i just ordered the sleep-button&proximity assembly to fix my bro's iPhone. May the gods be with me, because this looks even harder!

[@andy24111998]

Thank god for your tutorial! I had to use Assistive touch all the time which was driving me crazy :-) Just finished the repair and it took me about 3,5h but it was worth it. Even though the Proximity sensor isn't working anymore for some reason (yes, I have transfered the tiny rubber thing to the new cable), I'm really happy to have a functioning power button. Shame on Apple for making so unreliable components and not enabling an easy fix if it fails, so you literally have to take the whole iPhone apart... One advise: if you have a glass table, buy one of those "White board markers", put the screws on the table and mark the screws, it's really helpful and you can't forget to insert any screws.

[@Christmas2901]

Just followed this step by step and worked a treat! No issues at all.. Thanks for a good step by step guide!!

[@LightoMusica]

Thank you so much, I just fixed my phone following your tutorial! everything works perfectly as new :) Took me 135 min Hints for those attempting to do it: 1- If you don't have the magmat, at least print it on A4 (big help) 2- Magnetize the tip of your screwdrivers, will keep those tiny screws from falling 3- Assembling it back takes much more time than taking it apart so be prepared to spend a lot of time (don't get frustrated and push things if they don't align) 4- Take your time, have lots of light, use the right tools, and watch the video in 1080p! Good luck,

[@MarcusTheDynamo]

What was wrong with yours, was it the lock button stuck and did you buy the mag mat or did you just print the a4 page off ?

[@LightoMusica]

yes the lock button was stuck regardless how hard I press it.... no I just printed the mag mat on an A4 (still big help)

[@IamFreeRu]

Thanks for the tutorial! AMAZING! Just purchased a replacement proximity sensor from Ebay for $6. Much more economical than purchasing a brand new iPhone for $200.

[@kenbot77]

Great! Best iphone 4 dismantle vid on the net! good close ups of all steps! I looked a 5 others before finding this one. Congrats guys!

[@adamali80]

This was an amazing video....It was done very nicely....It took me about 2 hours to repair the flexy for the power button but it was worth it. Thanks iPhoneRepairMia people

[@youyou01101]

how the hell am i going to turn off my iphone if the power button isn't working -_-

[@kimberlynmiranda6897]

Dayerino that makes me laugh! But you're so right. This video is bullshit 😂

[@SAdamKessler]

Thank you so much, followed the guide precisely. Going in reverse was a bit of a trick, but I would recommend laying your screws out in sequential order that you took them out. Thanks again!

[@fivesfish]

Is it wise to use a metal pry tool? I thought a metal pry tool, risks passing static electricity into some of the iPhone's components?

[@JaggedZer0]

Thanks for the video. Just one question. On this repair I always have problems with the proximity sensors not working after, any tips or tricks?

[@ndbarras]

the little piece at the end of the video that you put over the sensor, do you sell that replacement part? I bought a used iPhone 4 with non functioning proximity so I took apart to find that was missing.

[@PADMIESTA7]

Thank you for this video.. When I got my replacement power button/light sensor button I thought it can't be that, that's the problem.. However, I have just followed your tutorial and it's worked a treat.. Took me 3 hours in total to strip replace and rebuild the phone.. I didn't think that was that bad as I have never stripped an iphone in my life.. This video would be sooooo much better if you showed the rebuild.. Took me forever trying to do it in reverse..

[@alopezjr]

I successfully fixed my power button thanks to this video. I only had two extra parts that I don't know where they came from. One tiny washer and a rubber piece that looks like it was to protect something. Other than that it's working fine. It took me a whole lot longer than the 50 minutes. By the way I didn't use the tools used in this video which I should of used. The screw driver that I bought was not pointy enough to get to some screws so this is what took me the longest. Thanks for the video.

[@CooleKip1]

Angel Lopez, Jr The washer sits on one of the six screws that are holding the lcd/digitizer assembly on the side, and the rubber piece sits on the top of the motherboard, underneath the wifi bridge.

[@ToxicwasteProductions]

Okey yeah i noticed that before. I suppose on some brands of screens that would be an problem. And if not carefull it would also pose an problem. Do you know of the light sensor is the same sensor as the proximity sensor? I had an replica screen installed on my iphone and proximity does not work. But the IR diod lights up and the light sensor that adjusts brightness works. Is that the same flex cable that does that? i would suppose it is.

[@J.Casanova]

Mad work For a power button ....

[@AtteroVisionz]

+Mr yeah i was watching and going along im like okay okay only the top part needs to come off this should be fine ..then he started going at the screws on the bottom and im like oh whys hes doing that ... then 5 minutes later " Remove the LCD display" yeah nope fuck that

[@user-lj4zw1rv9i]

Ikr. I accidentally cut the cable with the knife while i was moving it around. I said screw it ill use the assistive touch thing.

[@willsegatto]

Hi! Can you be more specific on which one of these is the mic?

[@makgideon2005]

Changed the proximity flex cable, Works nicely except the proximity sensor is down even I replace the rubber square to the new flex cable. Other than sticking a tape and color it black, is there any other solution?

[@SmllTwnTheory117]

Thank you so much for my video.. probably one of the hardest things I've done technically and your video was instrumental in helping me through it... Thanks again so much!

[@iPhoneRepairMia]

You should check out Mag Mat... Magnetic mat that helps you keep your screws organized.

[@greekmythologymusic]

I'm stuck with that very same question too. My iPhone fell on the power button and now it's stuck. Do I need to replace the button itself, the bracket or the cable thingy? What was the outcome of your attempt to repair your iPhone?

[@iPhoneRepairMia]

does you button look ok on the outside?

[@dominicsarjantson2537]

hi there which video did you watch for the paper in what was its name or how did you find it thanks pal dom.

[@quicsilver]

finally a decent repair video......you guys are awesome

[@OzCloudz]

4 hours later.... YES!!!! I Finally got the two bottom screws off. Whats step 2? lol xD

[@samuelmartins8315]

Hello, the ribbon from the power button flex cable is ripped. Could I fix it with adhesive tape wrapped around? Thank you!

[@Christosg8]

You are the best!!! I started following the instruction at ifixit.com but it ended at the power BUTTON, not the mechanism behind it... You've got the best tutorial... Thank you VERY MUCH!!!

[@neon_nerd_8822]

This was an amazing video. Thank you so much, fixed within an hour and now it's working like a charm. Can't express enough how grateful I am for people like you guys :)

[@JadeCruz]

Thank You Thank You Thank You!!!! This video held my hand through the entire process and saved me lots of money :) Anyone attempting this, keep track of which screws go where.. They are all so tiny. iPhone won't go back together properly if each screw isn't in the exact place it was before. Just sayin...

[@SwillyExtreme]

Finally! after 2 hours of shaking. It worked. Dude thanks. I feel smart now.

[@UNIUQ]

Hello, thought i could help, go into settings > general > aceccesiblity, and turn on assistive touch. It should be a white circle button that you can move around on the screen. Tap that button and then tap the option "device", There should be an option saying "lock screen" tap and hold that, and it should come up with the slide to turn off.

[@felipepeloggia]

i just bought the iphone Power switch (the physical one), but now i'm wondering.. do i need to buy that sensor too? Or do I only need to follow these steps until I can replace the physical switch, not even touching the Proximity sensor ribbon? I'm afraid I might fuck this up. Thank you!

[@iPhoneRepairMia]

You can replace the flex without taking the front screen off but it is much safe top take it off. If you do not take the front screen off you can damage the lcd and digitizer flex cable because in order to unscrew the power button bracket you have to bend them a lot. So we prefer to take the screen off when we do this repair.

[@crazymonkeybro21]

can i remove the 2 parts / proximity sensor off the old and on the new one since the one i bought doesnt have it

[@steini937]

thanks for the note in the end! otherwise I would have no idea how to fix the proximity sensor

[@C4rlo0]

Hey My power button is kinda stuck :/ i dont know if its completely pushed in but it seems like it is.. It only works if i press the button very hard.. Do i have to do the same thing you did in this video? Maybe i have a different problem?? Please help me!

[@supportmytroups7]

7:25 can you just pull it off or do you need to be careful and pull it and get everything attached to it off with it?

[@SteveCardiff]

My power button doesn't work, if I buy a 'light proximity sensor/power button flex cable' will this fix my problem? Or is it to do with the actual power button itself? Thanks.

[@Dabbin_ON_Em_90s]

hi... what if I ordered everything but forgot to order metal pry tool and precision knife and curved head tweezers??

[@matousoutrata]

50 USD and 90 minutes. Done! Thanks a lot folks!

[@rokomakarska]

Thanx a million, great instructions! I just performed the replacement flawlessly.

[@Takeoverartist1987]

@domenachi Why would you need to replace the power button if you can turn it off...

[@Takeoverartist1987]

@iPhoneRepairMia Looks fine but it's collapsed as if being pushed. It's not stuck and I took it apart to make sure it wasn't jammed.

[@madfraga]

A+ tutorial. Fixed my lock button with a new cable from amazon.

[@alicemuffins]

If I replace the cable, will my power button click/start working normally again?

[@actafu1]

I just changed out the power button/prox switch and put my phone back together and and now when i power up ive got a blank white screen. Do you know what would cause this? Thanks

[@MrNiels88]

so you use assistive touch or wait untill it falls off.

[@justincft]

This is why iPhone is splendid. And not everyone is an engineer to do this. .

[@KEEPitSTUPID]

What did taking the screen out gain?

[@corradoboy74]

awesome, finally fixed my iphone thanks to this video...great work

[@iPhoneRepairMia]

Yes it is the same sensor. A lot of people have the same problem see our proximity fix video try that trick it works 90% of the time for us.

[@Takeoverartist1987]

Ok so my button no longer works is it only the physical button I need to buy. Or is there more?

[@douglaswhiteman3850]

And how do you turn it back on if you turn it off and don't replace the button? Will plugging it in automatically turn it back on?

[@dunasfish]

A great video, it gives an understanding of all the components as well. Just have to be VERY organised to do everything in the correct sequence !!! THANK YOU !!!

[@user-lj4zw1rv9i]

Is your name Michel D*@! ?

[@Blankman85]

Just did this recently and now my speakerphone doesn't work. Is there any special way to put the mic back in or anything to transfer off old one?

[@littletwerpy]

For just fixing the lock button, i dont need to remove the screen, do i? it seems like i can get enough access by just removing the motherboard

[@TerryBadger]

I'm feeling ya on that right there. ARG! All I need now is a trip to the hardware store for the tiny darn phillips!

[@ToxicwasteProductions]

Wait why would you want to remove the display i cant seen an reason for that in the video? Please do tell?

[@Cyrano1987]

Cant find the WHT-002 Phillips screw driver on your site??

[@mdpenner]

I followed the instructions above and was able to get the power button working, however now the touch screen is non responsive. Any ideas?

[@killerkat74]

How can I get few practice rounds before I attempt this on my phone!!??

[@coolcool568]

Does this work on the dcma version?/

[@ventu89]

What is that you remove at 7:25?? Thanks!

[@SaintWick]

Will this work for a White iPhone 4s running on Verizon?

[@400exHD]

no it only works for the Black iPhone 4s running on verison... sorry man better luck next time.

[@trevorcaffee7430]

what kinda question is that

[@400exHD]

i know roght -_-

[@400exHD]

Right*

[@chubrikzhopa4881]

400ex HD hahahahahahaahahaahahahaahahahahaahahahahahahaahahahahaahahaaah

[@treescarf]

Thanks heaps. Bought the part, attempted fix. Things seemed dodgy for a touch there but I got it all together and it works perfectly. I am stoked!! I tried that assistive touch but I had to attend anger management classes fairly soon after, I decided fix the phone or buy another. Great vid. Thanks again.

[@boraabaci5162]

your video is very good qualty. thanks for your video

[@russellbrown1657]

Your video just saved my ass. My iphone just died and I freaked out. Thanks to your video I opened her up. Reset the battery connection and presto!! All's well again. Many thanks to your video, it saved my ass! Russ

[@17davica]

My display turns on but the touch is not working for me, any advice or I messed it up?

[@atangkhosa9207]

ok i have an iphone 5 thats only open to networks in the usa but not south africa..what do i do??

[@Takeoverartist1987]

@iPhoneRepairMia Yea I figured so I already ordered it. Should be here within the week.

[@AlexanderWKnex]

Does it work with iphone 4S?

[@feyayho]

Hello, i have this accident with water... My iphone it's ok now but the power buttom doesn't work and sometimes locks without i push it. Please give me an idea to know what can i do...

[@juandavidbarrada]

Thanks for the great video, I already fixed my cell phone and it works perfect now! Thanks a lot for the clear info..."take apart ALL my phone" to do this really was worth for me! (However all the process took me around 3 hours!!!)

[@MarioSarich]

my iphone 4 power button is collapsed but it works if you press firmly on one side. i'm thinking the sensor is fine but the button is compressed because of a fall and bent. what do you guys think?

[@ApplePro22]

DO a video on how to do it on the ipod touch 4g

[@rc7177]

I fixed my 4s ear speaker using their other video. Works perfect. Tried fixing my in laws power button works perfect. One problem he just got it hooked with a service provider and he cannot get a signal. Neither with wifi. They also tried a new SIM card. Any ideas? I'm going to try to open it again and check the antenna to make sure it's sitting properly. Other than that does anybody have any suggestions? Thank you.

[@latinourbano]

You dont really need to remove the lcd but whatever.

[@Erdnuss69]

thank you for this amazing tutorial!! just fixed my iphone 4 for 17€ Amazing!!!!

[@Luhit]

Excelente tutorial. Muchas gracias, es justo lo que estaba buscando.

[@gitcom]

One tip for people replacing the button: They use A LOT of adhesives (glue) to secure the screen the frame, so if Step 18 seems hard, IT IS. Just keep at it until the adhesive (which they applied around the area surrounding the home button, and the front facing camera) lets go and you can remove the screen as easily as they show on the video! Also, don't stick the metal pry tool too deeply on the side of the phone, or you might scratch the back part of the glass! Good Luck!

[@josephfaolotoi]

in the process of putting it together, think i just invented iphone 9. HAHA

[@webassasin]

+Joseph Faolotoi hahaha

[@annguy5563]

But Apple skiped the iPhone 9

[@vishalp8007]

@@annguy5563and now we know why, bc that guy invented it

[@Cyrano1987]

Thanks,I did step buy step and it works perfectly now!!

[@ابوحمودالمطيري-ف9ح]

I hope to do this Needs effort, work and study I love your work. Thank you

[@steini937]

The powerbutton bracket has two screws that are different sizes. I dont remember which that should be where. Anybody knows???

[@thamirdxb5458]

hi dear thanks.....its good video...i have repaired 2 iPhone 4. if your phone is not off doesn't matter when you remove battery connector it will switch off. I did like that.

[@matzi102]

great tutorial guys! it's actually not that hard off a repair, it only takes some time.

[@nightsauce]

one thing that you guys forgot to mention is the small retaining clip when re-installing the power bracket. I think that is why my power button has a mind of its own after the repair

[@iburnvx1]

My power button is not springy anymore. Is there a spring that I am missing?

[@BenjieMoreno]

Thanks for this awesome video. i just fixed my proximity sensor and home button.

[@nichap7]

So i was able to successfully fix my power button, BUT while putting it back together, I damaged the display flex cable and had to order a whole new display because of it. Went on to replace the display and now I'm having weird issues. The display won't work, but when I plug in the USB cable and connect to the computer, it keeps vibrating, indicating that it's connected to the computer. It basically keeps disconnecting and reconnecting. I'm guessing it's some sort of grounding issue? Any ideas?

[@madesimple]

My sleep button wasn't working at all, so i bought a power button flex cable to replace it. There are two things to keep in mind. First, step 18, focus on detaching screen from the home button and the lock button side first because there is glue there. Second, make sure the motherboard is fit in snugged before moving on. You shouldn't need to force the mother board in. If you attempt to force it in and it's sticking out, you can't put the cover back on.

[@benjamingrinev6664]

My power button is stuck, is there any way I could just fix it without buying another power button?

[@nathalycx7667]

how do i put it back ?

[@kikipalmtreekd]

1st step "turn off your phone" Hmm, is your POWER button is broken how do you turn it off??

[@SeRkFrOnCrEw]

fucking turn on your accessive touch moroon

[@range4u55]

if your sim doesnt read that can be a problem with your motherboard or you have a bad esn.

[@evanknapp6227]

Can any one help me . If my back screen is smashed will I be able to take the back off with out it falling apart

[@deuskadi]

Thanks a lot. It was very useful to repair my own iphone 4 at home. Succeeded

[@elletal23]

had a though time getting all the screws undone, everything is back on now, but phone won't turn on normally, is stuck in white screen :( what do i do now???? power button still won't work and iTunes does not recognize it, can't make it go into DFU mode PLLZ HELP!!!