Need to replace the power steering pump on your Mercedes Benz C230 2001-2007. If you have any further interest please visit www.2carpros.com *Disclaimer: Please use all safety precautions
Пікірлер: 35
@fr33_candy2 жыл бұрын
Just got an 05 c230lk love it great car but this is the first issue I've had
@2carpros2 жыл бұрын
This was on my Mom's car she drove it for 14 or 15 years. The only reason we had to get rid of it is because of a rear main leak. You take care of this car and it will definitely take car of you. Thanks for watching!
@robsleep3045Ай бұрын
great video Telling wrench and socket size would be very helpful
@marccbr1000rr17 күн бұрын
You need T60 for the belt, E12 for the steering pump, and T25 or T30 for the shield. But I highly recommend you buy a full socket set for E and T torx. They are not that expensive and you will need them on your Mercedes. You also need to remove the air intake if present and the muffler for the compressor. For that you need a screwdriver for the hose clamp and on the left of my left hand drive S203 there are two E12 bolts. It can come out without removing the belt which you can remove next. Cheers!
@marccbr1000rr17 күн бұрын
Sorry, the shield needs a T20 and the metal hose attached to the pump is fixed to a bracket near the alternator with an E10. There is also a need for new hose clamps as used in the video as the originals do not come off in my case.
@norzim18 жыл бұрын
This video is NOT for 2006 c230 !!!! may be good for 2001 to 2005. Can you make a video for 2006 c230 please
@RealTrillBC8 жыл бұрын
I am looking for a 2006 C230 video also. any help would be much appreciated.
@adamjones62287 жыл бұрын
I just replaced my rack pinion steering assy in 07 clk. now it has a noise coming form pump? how can I get air out of system?
@AgentFoxMulder19723 жыл бұрын
Hello, I have a c320....and steering is not that light as I need it to be, what can I do to have a lighter steering? Thanks
@2carpros2 жыл бұрын
Perhaps the power steering pump or box is going out. Thanks for watching!
@Dnasty12 жыл бұрын
How did you bleed this system after you installed the new pump?
@2carpros2 жыл бұрын
No. It will bleed overtime. Just add fluid as the level drops. Thanks for watching!
@Dnasty12 жыл бұрын
@@2carpros oh so you didn’t need to jack up the wheels and turn lock to lock? I see most videos doing that sort of thing.
@joesaric15 ай бұрын
@@Dnasty1 bleeding only if putting new fluid in it
@darvintoska76393 жыл бұрын
Hello I have a prb with my c200 kompressor when I bost the cars and change gears the car makes a loud sound like something snap sometimes it turns off and the steering wheel goes in mechanic mode . The sound is like e chain belt that is lose . But if I don’t bost the cars to much between changing gears it won’t do it, is weird. And when I go in hard road numbs it does it aswell. What can it be
@darvintoska76393 жыл бұрын
Plz let me know if u know what it is
@2carpros3 жыл бұрын
That is a complicated question, if you go to our website www.2carpros.com and ask a question for free, an expert will be along shortly to help! Thanks for watching!
@nastynahte16 жыл бұрын
Not how you do it on a 2007 c230 sport you're lucky you have room to take your pump off without wanting to just pull the motor to do so
@iwd17054 жыл бұрын
That one has the V6 M272. So the procedure is different, indeed.
@johnmcdonnell46543 жыл бұрын
Why did you replace the pump ?
@2carpros3 жыл бұрын
It was making a grinding sound. So the pump was on it's last leg. Thanks for watching John!
@damarisrodriguez3176 жыл бұрын
is the same on a 2001 c320 elegance?
@DIYCOMMUNITYHACK7 жыл бұрын
what size of the female e-torx?
@iwd17054 жыл бұрын
Well, this will only help for a C230 Kompressor which was only produced from 2002 to 2005 in the coupé, the station and sedan only had this engine from 2004 to 2005. So these are more or less rare variants. From 2005 onwards it was V6 engine.
@brentmyran14104 жыл бұрын
Great got mine changed but I knocked off plastic stem for coolant line to tank..... balls
@Nijikashi74 жыл бұрын
Nice dude!
@ozlukhakanАй бұрын
Schraubensicherung???
@SteU4IA8 жыл бұрын
perfect!
@2carpros8 жыл бұрын
+Ste .L - nice!
@clementmuhirwa4 жыл бұрын
How will you know that your pump needs a replacement
@2carpros4 жыл бұрын
It will make a loud noise and/or your steering will be difficult. Thanks for watching!
@76alexenes Жыл бұрын
I bought a 2001 mercedes c320 and the battery was dead. After replacing the battery my car has hard steering is it possible it may need to be calibration or the pump is bad? No noise from the pump just hard steering. Thanks