Thank you many years of testing on my car to make sure it's safe for everyone.
@bentleysmith61084 жыл бұрын
Love this!!!! Will definitely be ordering this soon
@sisawyer1016 Жыл бұрын
I’m doing this next week on my mk1 cupra r bam engine k04 turbo we have a bit of a different set up we’re you have the y pice next to timing belt cover we have 2 hoses because we have water pump for the turbo when the cars turned off runs for a couple mins to help cool it do I just blank the 16 mm hose that goes to bottom of coolant ball ? In my mind that’s how be good if you could confirm as all the vids Iv watched all mk4 golfs 🤙
@KerbsterCrushtic3 жыл бұрын
Me when people tell me that the factory hose clamps are best: hahahah All of my experiences with reusing factory clamps: drip.......drip.......drip
@PincheALsGarage3 жыл бұрын
You have bad luck. I always use oem stuff when i can.
@corumstratton23174 жыл бұрын
It is a touch harder when your using the factory intercooler😅 another great video tho al👌🏽
@corumstratton23174 жыл бұрын
And I self tapped clips to the frame rail to hold my lines
@JimmyPtheman4 жыл бұрын
Awesome
@hogueraleksander5868 Жыл бұрын
Lol. You dont throw the coolant in the floor. When the coolant gets hot it expands and comes out of the water neck.. should go into a reservoir and feed from the bottom of it. When you turn off the car and the system cools down, it will suck it back into the radiator. They are called overflow tanks for a reason.
@PincheALsGarage Жыл бұрын
Correct however the tank has to be up and visible which so the water can be sucked up when it cools down if the tank is to low gravity wins and the coolant wont go back into the system defeats the purpose of this. Just keep the stock stuff.
@bandit2459 Жыл бұрын
Where can i order one of these kits??? I need one asap
@scottyoung95193 жыл бұрын
Have you found any places to relocate the power steering bottle with the side mount intercooler? Thanks
@PincheALsGarage3 жыл бұрын
No not really.
@yaritzastroehle4163 жыл бұрын
Can u do a abs delete vid
@Dillvn2 жыл бұрын
How much is this kit or was it? I might be buying it used.
@mrsparkleanthonyhunt65372 жыл бұрын
Why not delete the fitting on the upper hose to the coolant flange and put the filler neck in that spot without cutting the hose? Less parts hides the cap better
@mrsparkleanthonyhunt65372 жыл бұрын
Nvm I get why harder to bleed that way
@steambuns2283 Жыл бұрын
hey bro where can i buy the kit?
@FreeRkelly73744 жыл бұрын
On the low pressure return line... couldn’t you just leave the OE line and add a fitting to extend the line instead of dealing with cutting? About to do this
@PincheALsGarage4 жыл бұрын
You could do this but you will risk having the hose bend or hit a pulley. This is why we cut the metal line to move it out of the way.
@FreeRkelly73744 жыл бұрын
PincheAls Garage absolutely, thanks for the response 👍🏻
@PincheALsGarage4 жыл бұрын
@@FreeRkelly7374 anytime
@aatencio1125 Жыл бұрын
Idk if this has been asked but with the SAI pump removed how likely would I be to relocate the PS reservoir to mount on the block in place of the pump?
@PincheALsGarage Жыл бұрын
It's very doable however it will get very hot my suggestion is make a bracket that keeps it away from the block and make sure the hoses also don't touch anything metal or it will rub a hole into them
@aatencio1125 Жыл бұрын
@PincheAls Garage awesome thanks I was worried about it possibly not being elevated enough compared to the PS pump
@ryabekadmitriy3 жыл бұрын
how to send you a photo of the wiring under the hood? I have a question
@RMH19994 жыл бұрын
Do you need to bleed the system after? How do u do this
@RipCord3293 жыл бұрын
is your valve cover powder coated or polished?
@starnethotmail3 жыл бұрын
Where I can get only the filler neck. Because I will be doing the delete on my 1.8t b5 passat. I'm completely tired of replacing the expansion tank.. also I like how the valve cover looks so far. Thanks ill appreciate any help
3 жыл бұрын
I just bought a side mount intercooler. Can you recommend a solution for power steering relocation? please Al
@PincheALsGarage3 жыл бұрын
Don't have one sorry you will need to be creative. Not to hard
3 жыл бұрын
@@PincheALsGarage thanks for the reply bud
@toddwilliams96812 жыл бұрын
I have a mk6 jetta 2.5 can i assumr this same kit &process can work on mine. Granted the pump is on the driver side?
@PincheALsGarage2 жыл бұрын
No it will not work on a mk6. Strictly for mk4 platform
@toddwilliams96812 жыл бұрын
@@PincheALsGarage didny think so, i ssen some threads where it's been relocated. Any who's dope vid ✌
@jeddyvw60183 жыл бұрын
Will this work on a mk4 vr6 turbo set up? Or will I need upgraded fans? Please get back to me I’m just finishing up my turbo kit?
@PincheALsGarage3 жыл бұрын
No sorry won't work on a VRT. Not the same at all
@jeddyvw60183 жыл бұрын
@@PincheALsGarage what is the difference between the vrt and 1.8t with deleting the coolant ball?
@garrett64043 жыл бұрын
Will this kit be coming back soon?
@PincheALsGarage3 жыл бұрын
Yes sir very soon. I just ordered supplies and now I have to make them brackets. I make all the brackets by hand so it takes a while
@albertoarriaga22974 жыл бұрын
Does this work nicely with a MK4 R32? (Bigger Engine)
@PincheALsGarage4 жыл бұрын
That I dont know however I do know you need to upgrade your radiator or fans if you do a coolant ball delete
@harleyburcham83412 жыл бұрын
Does this all work with the pd150 mk4 golf
@PincheALsGarage2 жыл бұрын
No it's strictly for the 1.8T. You might be able to make it work with a PD150 but I never tried it
@harleyburcham83412 жыл бұрын
@@PincheALsGarage power steering relocation still works and the coolant inline fill should work around the same spent yesterday after watching a few of you videos ended up wire tucking the drivers side(from the uk) and then getting rid of everything from that side
@SaskGramCracker Жыл бұрын
So where does the washer jug go there wise guy? You know the factory one your not using for Water meth injection.
@thamontgomeryz4 жыл бұрын
Will you ever do a vid on power steering delete and installing the loop line on the rack? or AC Delete
@PincheALsGarage4 жыл бұрын
Yes. I will be doing the AC delete next to show you what belt to use. The power steering loop is a good idea and one we thought about making as well
@thamontgomeryz4 жыл бұрын
@@PincheALsGarage sweet. I have been following many of your videos. Ac delete and power steering delete are two I really want to do.
@ThatstaticGTI.3 жыл бұрын
will this work on a mk6?
@PincheALsGarage3 жыл бұрын
No
@timpo45684 жыл бұрын
Do you ship to The netherlands?
@PincheALsGarage4 жыл бұрын
Yes. Please follow the link www.pinchealsgarage.com/international-orders
@chrislaws92444 жыл бұрын
What's your online store address bro?
@PincheALsGarage4 жыл бұрын
Www.pinchealsgarage.com
@chrislaws92444 жыл бұрын
Cheers fella 👌
@PincheALsGarage4 жыл бұрын
@@chrislaws9244 CHEERS!
@gandyortiz44143 жыл бұрын
Where do u order
@PincheALsGarage3 жыл бұрын
My online store Www.pinchealsgarage.com It is down for now another 2 weeks and it will be back up for you to order
@johnwolff34594 жыл бұрын
what is your store
@PincheALsGarage4 жыл бұрын
Wwwmpinchealsgarage.com
@avelinocuevas63462 жыл бұрын
Can I still get a kit
@PincheALsGarage2 жыл бұрын
At the moment no. I am currently in the process of moving so my online store is down. I will be back up in a couple months with a ton of new products as well.
@mrsparkleanthonyhunt65372 жыл бұрын
I’m having to put a cup every 30 min
@kidandermk44853 жыл бұрын
Is your website down?
@PincheALsGarage3 жыл бұрын
Yes we have to take down our site. We have a couple orders that just went through and that is it. Sucks!
@PincheALsGarage3 жыл бұрын
It will be back but not anytime soon since I have to build it from scratch again
@kidandermk44853 жыл бұрын
@@PincheALsGarage anyway I can get that coolant delete and reservoir relocation kit? Legit was going to buy it this morning but I saw the website was down :/