This is great information. I've been doing this with etap as an intern, but this explained the back end of why we care.
@ashk2318 Жыл бұрын
As an intern at ETAP, what do you do specifically regarding load flow? Also is the work difficulty? Thank you.
@Ms956565 жыл бұрын
Wow that was great explanation. I really appreciate this clear and easy way to understand in simple way how to analyze the system.
@EthanMatthes6 жыл бұрын
Dear C# Tutorials: I'm enjoying your instruction. The graphics and narration are very clear and accessible. In this particular video, there is a digression about which generation units are committed to run and serve load. Please consider revising that section. There are a lot of factors at play: Is it a region where wholesale electricity is traded in a market or is it for a traditional vertically integrated utility that owns and operates everything? You also need to distinguish between energy consumed by load and energy capacity needed to fulfill reliability requirements. Nuclear power definitely is not the least cost source in an era of cheap natural gas and plentiful solar and wind (no fuel costs). The renewable sources also receive incentives for added advantage. Natural gas is flexible to balance out variable renewable supply, but in some regions it must participate in cap and trade. There are also limits on the has pipeline system during winter months. Security, environmental, and legal costs are significant for Nuclear. Until modular nuclear is commercialized (NuScale), nuclear will be considered an inflexible base load source. Aside from the digression into generation sources, I'm loving your instruction. Keep up the great work!
@aqeelalmousawi15005 жыл бұрын
I thought apparent power is P+jQ but you have it as P-jQ Good explanation thank you
@abhishekparamanand7 жыл бұрын
It was a very good introductory video on LFA. Thank you. Looking forward to more such videos.
@yihadhaddad96216 жыл бұрын
Magnificent explanation. Thanks a lot.
@mokhtarawwad62913 жыл бұрын
THANKS for the strait forward we explained explanation
@Omarsayan7 жыл бұрын
Good explanation, but you need to clear 2 things: 1) The direction of current I(load) and 2) put a star near V2 in the formula, e.g (P-jQ)/conjugate(V2)
@JohnHondo119976 жыл бұрын
I concur with this.
@maracay200017 жыл бұрын
excellent explanation
@Kaiser.Alexander.I7 ай бұрын
Awesome explanation! 👏🏼
@ryszardcetnarski66484 жыл бұрын
Congrats for the quality of schooling
@TheHaidaman17 жыл бұрын
brilliant explained and simple to visualize.
@rainereyes9027 Жыл бұрын
Hi.. I just have a question with the 1st equation Iload+ I1 +I4=0.. did you just transposed I1+I4 on the other side? im just wondering why they did not have a negative sign.. and it should be like Iload= - (I1+I4)? thanks
@jasond24547 ай бұрын
Thank you! This really helps with my course project.
@auguybakome11274 жыл бұрын
Thanks for the detailed explanation. Very helpful
@user-kn6xf8un7l5 жыл бұрын
very good explained,thank you so much
@michaelbee82635 ай бұрын
Great job
@CH-tv1cy6 жыл бұрын
Best explanation I've seen
@richardf91123 жыл бұрын
Incredible video. Thanks so much!
@sajjadkareem6082 жыл бұрын
Thanks for the great lesson
@vrbaac16413 жыл бұрын
hi.... great subject... ^^ I also want to know, is how can this principle be applied internally to a power system of lets say a a High Rise Building...? thank you very much and hoping for more lessons to come ^^
@sohailjanjua1233 жыл бұрын
Hi , I like your lecture. Thanks
@shara62813 жыл бұрын
Great explanation 👌🏻
@ThePeacefullOasis7 жыл бұрын
Nicely explained. Couldn't be easier :)
@erickarwa-07052 жыл бұрын
Wonderful video. Great and simple explanation of LFA.
@eepower4 жыл бұрын
Great work. Thank you
@wilmeresuarez5 жыл бұрын
Excellent....
@ebarbie50164 жыл бұрын
The P-jQ is actually a power conjugate, not just power
@clemzo62 жыл бұрын
It was clear, thank you. I just have one question : When you go through the iteration, how can you be sure that it is not a local maximum ?
@butterflyseraphine74874 ай бұрын
can i run load flow analysis from a real feeder network
@Lonkotuma7 жыл бұрын
Awesome. clean understanding
@azzammeeralam71826 жыл бұрын
For those looking for part 2 here it is. Part 2: kzbin.info/www/bejne/bXLOkquAapJ5h7s
@Hatem.Egyptian4 жыл бұрын
thanks
@blackburnmichelson61893 жыл бұрын
this is good but how much time we must guess and itharete this bus voltages ?
@aramidekay54485 жыл бұрын
Why I1 and I4 became positive?
@harithalau19704 жыл бұрын
thank you for pointing that out, i guess he mislooked
@bluebird92626 жыл бұрын
very interesting explanation. I suppose, this is the Gaus-Siedel method.
@bayaacyril8915 Жыл бұрын
Great
@snehamoypatra97865 жыл бұрын
MARVELOUS
@suratkhan22086 жыл бұрын
Excellent
@sarangapinipa7204 жыл бұрын
wow damn!the best explanation.thank you!
@robertdavies33844 жыл бұрын
What I don't understand is - why does power flow from the generator bus to the load buses with lower voltage? I.e. How can power flow if there is higher potential difference at V1=1.0 to V5=1.03?
@scc13143 жыл бұрын
Hi! For active power flow, it is usually dictated by the angle difference. The bus who leads will deliver the active power. For reactive power, it is usually (for transmission systems with high x/r ratio) dictated by the magnitude. usually the bus with higher voltage will provide the reactive power.
@kingworld20026 жыл бұрын
At 24:30 i think the sign convention is not correction.plz correct me if I'm wrong
@a136905083192 жыл бұрын
you r right
@adembugra3 жыл бұрын
Hello teacher, I have a question about the power systems analysis course, can you help me?
@wesleycostaee7 жыл бұрын
Fantastic!
@shakirahnaruyinda3324 Жыл бұрын
Wana watch the next video
@donty19946 жыл бұрын
thank you so much
@luisfreire5724 Жыл бұрын
que manera de explicarlo!!
@mbagassyaatnuartoro90924 жыл бұрын
thanks
@suongsocheat75537 жыл бұрын
Dear Sir. I'm wanna ask u one Q: Could u tell me about the Voltage Regulator definition and useful on the Video? Thank you.
@theultradiamondgamer76504 жыл бұрын
A device which is used to maintain the system voltage with in limits. e.g capacitors are used to maintain the voltage by injecting the vars in system and tap changing T/F are also used to maintain the system voltage.
@dhafer7210 ай бұрын
Hello, do you have e free link to download powerfactory please, I need it for student project ? Thank you
@thaaralasaday38536 жыл бұрын
Is there any vedio about Newton Rufson mothed
@6996skull4 жыл бұрын
Hi, has anyone been able to get a copy of the matlab script? Would be really helpful to further understand :)
@danilodulovic21973 жыл бұрын
at 23:12 I think the last equation is not right, check pluses and minuses
@varghese712 жыл бұрын
i agree. plus and minus should be verified for the equations
@sakirdag29765 жыл бұрын
good
@afaanali43376 жыл бұрын
where is the next lecture
@brucelarge28013 жыл бұрын
It's in this series, it looks like Ep #2 models it with C# - kzbin.info/aero/PLGtyXSn57qnLY9uE-7YhiRIY1_aI3e7tl