Cab Repair Without A Welder? It Can Be Done! - Trucks! S8, E9

[@justpastmidnight]

It's like WWE and This Old House had a baby that decided to be a mechanic.

[@mavmo192]

Ha!!!!!

[@kennethchoyce8186]

I got the WWE part good one 😂😂😂

[@Redfiregtag]

WHAT!!!?!!!?!! WHAT!!!😊

[@suzuki06g]

Yup, just found the video - the bald guy needs to dial it down several notches.

[@jasoncolwell7293]

yea the bald headed dude does remind me of perry saturn, voice almost as annoying.. the little skinny guy needs to be the only one talking.

[@garymccloskeyjr.6265]

Jesse “The Autobody” Ventura! 💪🏼

[@billhayward2668]

I like the method used to repair the rust without welding. Very, very nice work.

[@hexahexametermeter]

5:07. 😂😂😂 The contrast. "...PLENTY OF TIME TO SET YOUR PATCH." [passes the gun] "thank you."

[@jollyp1605]

I like the way he puts the truck on a hoist and works comfortable.

[@OldsmobileCutlass1969Va]

Sure... If you have access to one. But most people don't have one.

[@brianb1273]

Pretty Slick! I've learned ALLOT over the years from watching Kevin. Here's one more.

[@hexahexametermeter]

6:02 😂😂 "cool! we can take a break!" "YEAH!! AND THEN WERE GONNA SHOW YOU HOW TO FIX THOSE PATCHES!!"

[@peterl2017]

Had to laugh at the Vice Grips😂Think you could fit in another pair?

[@stick9648]

Wasn't real that was a picture welded on.

[@jefferywarburton2116]

I was wondering what that many would do to the budget. you can never have too many clamps.

[@OldsmobileCutlass1969Va]

I don't know why they needed so many with a 1 minute set time!

[@twgarage-terrywatson1672]

Looks good however, over time you will see a perfect line of where the patch outline is due to expansion and contraction. The panel bond and glue expand and contract at different rates. There is a time and place for panel bonding but but hints are not the place.

[@johntatman9168]

I. would have used almost the entire panel replacing it at the natural body line that way if it does start to show it would be far less obvious.

[@jamesandreu516]

It's like a drywall patch with metal. Excellent 👍

[@dannychiguina3962]

Awesome 👍 job guys I appreciate all your Tips and Tricks Videos keep up with all your Build's/Works 😎🥃👌🤙

[@hectorramirez1808]

Thanks for the video guys, it really helped.

[@joslynanderson4681]

GENIUSES AT WORK WOW LOVE THE PAINT JOB AND THE METHODICAL WAY YOU GUYS WORK ABSOLUTE GENIUS ,BLESS YOU GUYS .

[@tvoprosucks]

hey mr clean you dont have to yell

[@tinkeringtrucker5196]

I forgot how bad he was

[@matthewcumpston2716]

Lol

[@kennethbrown8723]

Volume button, use it!

[@tvoprosucks]

@@kennethbrown8723 so he'll stop yelling if i use the volume button?

[@jimthomas1989]

I'm trying to figure out which one of these guys is Stacy David 🤔 I gears I'll never know !

[@rodb8274]

I’m doing a 50” long lower half quarter panel replacement on a Chevy Cavalier using panel bond and a contoured backer strip cut out of a junk yard piece. I’ll glue the backer strip in first like you did, but use Pre-drilled holes and wood screws to clamp it, instead of clamps. Then remove the screws and dab the holes from behind to make a waterproof bond. This method causes zero distortion and no pinholes like welding does. Great to see someone else use this method. I know skeptics will say that you can’t help but get ghost outlines and color bleeding from any type of bonding glue. What does the patch look like over a year later?

[@talon1706]

I use Panel Bond to do these types of repair. It can be sanded to shape too.

[@kalijasin]

Magnets, sanding blocks, glue, cure lamp, air compressor, cut off wheel, clamps, sandpaper, sanding disc, etc.. going to cost as much as welder. LOL

[@Chopski64]

You still need most of that for any paint job.

[@jonathanyates5198]

Plus panel bond is non corrosive and very strong. Lasts forever

[@OldsmobileCutlass1969Va]

​@@Chopski64Most people will just rattle can the spot until they have money in the budget for a real paint job.

[@zakmey6944]

These guys make it look easy, the 1 guy seems like his soft and passive, the other guy seems like his loud and aggressive. Hahaha

[@user-pw7wl3nu1l]

It's funny how this guy using the mask while putting the filler, not when send in the fiberglass, good job 👏

[@TheGamersRace]

It's the chemicals that are harmful, not the fiberglass. He also masked up when sanding the primer.

[@user-pw7wl3nu1l]

@@TheGamersRace Yeah fiberglass totally fine for your lungs 🫁 🤣👍

[@TheGamersRace]

@@user-pw7wl3nu1l Fiberglass causes no damage to your lungs, has no carcinogenic effects, and has no permanent lasting effects on you unless severe amounts of it are inhaled regularly. Or you know,... it's burning. Short term, it can cause mild skin, eye, nose, and throat irritation. So obviously wear a mask, but if you don't you're not going to become the next Deadpool.

[@blkwng81]

This was neat to see how to repair the rust section without a welder

[@gmwrenos7222]

That $30 panel bond is now $153 cdn now!

[@enermaxstephens1051]

Good old trudeau and crew

[@rfhentges]

Hey, if they can smuggle drugs in, I am sure you can score some on the streets for a little cheaper......

[@jimmyblair7597]

excellent video guys!!!

[@motorised1]

those cool billet peddle covers look slippery as fuck

[@Seethenhagen]

Everyone is talking about Stone Lukewarm Steve El Paso, but I'm just learning that comically sized arrows aren't just from cartoons. 5:59

[@TheUltimate65]

Carbody glue works find. ,don't forget to protect the innside.

[@OldsmobileCutlass1969Va]

Yeah... All that bare metal ready to find some moisture 🤣

[@dudleydorite7678]

Damn, I was hoping something was going to go wrong so that guy would pick that truck up and throw it through a wall

[@jonathanharris6232]

underrated comment

[@bikerjon8934]

😂

[@frankthespank]

You can get a cheap flux-core welder at Harbor Freight for around $150, yes you’ll need other stuff like a welding helmet and some gloves but get a welder and learn how to stick metal together, it’s a capability you’ll find very valuable. 😎

[@mrbriggs68]

Key word you said cheap meaning junk

[@frankthespank]

@@mrbriggs68 Not really…. welders are incredibly siqmple machines now, you don’t have to spend hundreds of dollars on a welder anymore to get one that can lay down a decent weld. At Harbor Freight the old black AC welder that goes for around $150 (depending on what coupon you dig up) still kinda sucks. But, they sell a better one, it’s neon green color and goes for around $20 (again, depending on wat coupon you can find. *All of Harbor Freight’s prices have increased in the last few months, thanks to our current administration… 🙄

[@jonathanyates5198]

@@mrbriggs68 They are not junk

[@theobsoleteman7935]

@@mrbriggs68 they are great welders for the price. I replaced the rockers 'floor pans 'cab mounts and door pillars on both sides on my 1975 Ford f250 4x4. Gotta love the rust belt.

[@jonathanyates5198]

​@@mrbriggs68 no they are good welders

[@DirtyDovi]

The 'backing brackets' made from the scrap panel will do the trick, but in my experience.. Using a flange-tool works perfectly. I've probably done a few hundred repairs that way.

[@SPLIFFZPUFFZ]

Um, subscribed, obviously. Who directed this? Fantastic!

[@cm-ek4ci]

Former tv show

[@scooterinvegas1]

4-6mm thick primer with 3 to 4 coats? 4-6 mils per coat maybe.

[@WatchRichRebuildsChannel]

How about links to the products in the description? 🤷

[@SSJIndy]

"This has been a Vince McMahon production"

[@Pink_hat_guy]

metal pedal covers? that ought to be fun when wet.

[@biglon74]

Yea, pedal covers look cheap

[@garylivingston9052]

HaHa, yeah i thought the same thing. Not only do they look stupid, they are held on with some type of glue or tape, and yes step in out of the rain and push down on those and your shoe will probably slide right off.

[@OldsmobileCutlass1969Va]

How about the chrome dash blinding you when the sun hits it! 🤣

[@slvrktman7824]

Always thought someone would manufacture some truck cab corners and rocker panel covers that could be painted with a spray can and then glued on. It would cover the ugly rust and holes, wouldn’t fit flush but would look good enough for a daily driver truck, and not break the bank!

[@sawyercherney6000]

They do

[@bubbashubbs298]

They do.

[@SOLDOZER]

Cool to see Macho Man's son doing car restoration!

[@damirturkovic9830]

😅

[@enermaxstephens1051]

Will you guys please post up the second chance silverado videos?

[@mrredpill3121]

you know your good when you don't even get dirty.

[@jumpinjojo]

*You’re

[@mrredpill3121]

@@jumpinjojo tnk yo 4 th spel cek

[@colorbosscustomautobody8140]

Can someone tell me what the brand and model of that full face mask supplied air respirator is?

[@mbhftw]

Not sure what they were thinking when they hired Paul for this show

[@icejawa1829]

they were thinking HELL YEAH BORTHER hes a dollar general version of stone cold

[@jonathanyates5198]

@@icejawa1829 Borther?

[@Buttermilkjug]

@@jonathanyates5198 Borther is the Dollar General version of Brother~

[@ginaerwin4865]

I hear you - especially when he makes his voice gruff - Kevin has always been great but that is a terrible mismatch - shorts and a dress shirt doing body work - fire the marketing person for these episodes

[@rfhentges]

@@icejawa1829Good one! I usually say the "great value" version....

[@lummy321]

Professional work guys... Praise YHWH 🙏✌️👍🙌👑❤️

[@Qardo]

I don't get why for what seemed like 3 minutes of audio was cut from this. I get it. The music likely claimed by some label no one has ever heard of. But geez.....

[@edwinheredia4305]

Wow guys tremendous job that truck looks awesome

[@keithshergold9257]

That cab corner job looked easy and high-quality. It actually looked better than welding. Is there any reason not to do this?

[@tokuzumi1]

I wouldn't do this with anything that would be structural. But for patch panels like this, seems like the way to go if you don't have a welder, or the skills necessary to weld.

[@Ducking_Fustin]

Rust

[@johnnyshd8250]

You will see a ghost line where the patch is after it ages

[@rfhentges]

@@johnnyshd8250 That's why you only do it on a vehicle you are putting on facebook marketplace....

[@JKargariyan-xl2lj]

Thanks

[@stever3953]

I wonder what ever happened to that truck? This was filmed a while back

[@leogetsome]

I prefer the welding method but very interesting

[@KevinRoadrageGarage]

When upper management hires the voice of the Kool-Aid man. Annoying

[@hidinfrombiden1734]

"A good welder starts at about $800": Me with my Harbor Freight welder: 😭😭😅

[@ginaerwin4865]

This show is probably 15 years old - long before harbor freight

[@mallorymcguire833]

Does this work on top of paint? There's a 5" round hole on the floor of my van I'm trying to figure out how to fix it because the floor is corrugated. :( This hole was cut out of sheer laziness by a shop person installing a diesel heater in my van. It's going to be hard to go to bare metal because of the corrugation. I was just thinking of using panel adhesive for a piece on top of the hole, since it's hidden so it doesn't have to look perfect.

[@mallorymcguire833]

And there will still be gaps under the piece :( I'm so mad they did this.

[@jefferywarburton2116]

windshields are glued in over paint and the urethane glue does fine for years.

[@OldsmobileCutlass1969Va]

Try cutting out a patch panel from the junkyard.

[@TeamJesus515]

Ohh Yeah Brother 🤘

[@royjacobs6680]

How long would a repair like this last ? Six months, a year, ten years

[@PonkyKong]

If you remove the rust and garage park. Decades.

[@Oddball159]

you could test it and find out maybe. idk maybe some day ill have a chance to try it out.

[@GluteusMaximus808]

If done properly, years.

[@lodwill5116]

Might as well showed us spray on bondo too. Lolz

[@jimmyalvarado3109]

wow bill Goldberg, love to see next show, when Goldberg tells us WHO'S NEXT!!

[@johngate4715]

there is always going to be snobs who get mad when people don't weld in panels. It is like they get disgusted when they see people doing any other type of repair that does not involve welding. Not every fucking car rust/panel repair needs to be welded in. After you do all the needed prep work, rust removal, glue a panel on, and fiberglass, bondo, and paint over it, it aint coming off, its not going to just fall off after driving down the road lol, I dont know where people get that Idea from. If you let it get that rusted out again to the point where it needs to be repaired again, then that is on you, NOT THE REPAIR!

[@SINSTER7THREE]

Ok, This was filmed back in 2006 . You can tell by how young Kevin looks. Dont think you could get a decent welding back then for 150 bucks. Also structural body panel adhesives have come a long ways in 18 years for everyone knocking it.

[@wickedeagans]

yeah but now the inside that cab corner has some bare metal tho.. it will rust out faster than i did in the first place

[@2435rats]

When did the pro wrestler get hired?

[@tinkeringtrucker5196]

20ish years ago.....1 season wonder

[@chevylandt.v]

What I want to know is will it crack over time?

[@fabiancook1498]

So u see the pros does this so don't 🤔 think body shop not doing this it's not wrong it's made for this try I'll got my own body shop I do the same process

[@Shade_tree_garage01]

@@fabiancook1498 nah, I’d prefer for my body work to last.

[@fabiancook1498]

😂 lol well pay top dollar for the weild job no complaining when they say$150 hr it's gonna take 6hr to complete 💯 that the way that works

[@chevylandt.v]

@@fabiancook1498 I'd pay only 20 bucks for a weld job, like that.

[@fabiancook1498]

@@chevylandt.v an u must do it ur self from harbor freight

[@Ducking_Fustin]

Why does this guy remind me of a cross between Goldberg and Steve Austin? Lol.

[@TravisThompson1998]

Way better if the pinstripe is under the clear.

[@tonymickens8803]

Hell, for $10,000 you Could have Fixed Up a Junk-Yard LS and had Money Left to Turbo that Thing! HAHAHA!

[@jeremiebuzard5538]

Now I know the face behind Kermit the Frog's voice. Over the Top bud.

[@Pchelnikovv]

Super😊

[@ScrewHeadJuNgle]

GWWAAAAA!

[@SteveGrin]

What did those body parts from LMC cost?

[@jaggass]

Paul looks and sounds like Stone Cold Steve Austin.

[@c50ge]

4-6mm thick after several coats??? Seem mighty thick.

[@hexahexametermeter]

6:06 😂😂😂😂😂

[@vr6muppet]

Did he say primer ends up 4-6mm thick after 3 coats? : / That sounds incorrect.......

[@jacobdalton6868]

I got dizzy and lost hope at 5:40

[@davidfrost4944]

$300 worth of vise grips...

[@karimahmusic]

I saw your comment before I saw the moment. I was so confused…but when I saw it, I cackled. I had to rewatch. Iconic freeze frame.

[@RockwithJesus]

Yes you can fix whole in body without welded it's called bonddoe 😀 I Just wouldn't do it. Cheap O

[@chriscatarcio2983]

You should have went all the way down to the pinch WELD. With the patch.

[@joemarvelous234]

I feel jipped we didn't see him do a cycle of roids and workout

[@gene2200]

Just get your mig out and do it right, different materials contract and expand over time and you'll see it.

[@sebastian0107]

With a body on frame car, I see no objections using this fix. Even on airplanes and Lexus they use glue!

[@Pendaws]

1st for a change, good job fellas :)

[@silvercommander]

I've seen rust holes stuffed with socks

[@bullboss7698]

I guess I'M old school, that body work was painful to watch.

[@joelh3364]

That dude should rip his shirt off and flex, then say 'oooooooooh yaaaaaaaaa' . So instead of all that, just get spray expand foam, let it just go everywhere and harden, cut and bondo, paint, done. Like 1 hour tops.

[@MrNaKillshots]

Or put filler foam in, and then flatten/reinforce with fibreglass resin and filler.

[@davidparker9676]

That is some Mickey Mouse repair, the foam will cause more rust to form on the back side. Panel adhesive and this technique is not bad for a DIY method.

[@MrNaKillshots]

@@davidparker9676 I fashioned some steel plates, placed them inside hole with very strong resin, then used steel filler and built up the profile. I cleared the inside sill of rust remnants and applied a couple of coats of rust treatment. After setting and then flattening it is solid and looks like new! Then I noticed the other sill needs doing!

[@davidparker9676]

@@MrNaKillshots When I was a kid, I bought a rust bucket and wire wheeled all of the rust I could see, treated it with rust treatment and filled everything with "kitty-hair" fiberglass filler. You know what? It lasted a pretty long time before the rust bubbles came back. I had a guy cut all the rust out and weld in new steel, the rust came back after only a couple years. Proper rust repairs involve getting all of the rust removed or treated and sealed with epoxy primer and cavity waxed from the inside. Rust is like roaches, you see one, there's 1000X more you cant see.

[@MrNaKillshots]

@@davidparker9676 still, it's what we do. We love a challenge. My wife would've just bought a new car in a nicer colour.

[@Drauntabuxy]

Coke is one hell of a drug lol

[@dexterplant778]

Wait a tick! Buying a welder is not in the budget, you can fix it in your driveway, then they put the truck on a lift, yes when we buy or rent our homes a lift in the driveway is always part of the budget, right!? I would wager that there's a lot more folk's like myself with one or more welding solutions and no lift.

[@nobodyschild967]

I live in an Apartment structure. Whats a garage? Im familiar with the forbidden extension cord to run some FluXCore with my 110v mig🤣😅

[@bluecollarnobody4217]

I think you forgot boys Peel back the interior panel and expose the inside of that repair Spray a little bit of rubberized undercoating on it Cause it’s not it can rust from the inside out

[@floodx4947]

ME: Mom! I want some Stone Cold! Mom: We have Stone Cold at home. This: Stone Cold at home.

[@jonathanyates5198]

Makes no sense

[@DigitDesign]

😅

[@ruco5775]

9:21 4 to 6mm thick..... are you high.

[@ROYALPRIX]

I saw the shot of the 672 clamps and said NOPE. I'd rather go buy a HBF welder and take my chances haha.

[@MrAndyLocksmith]

Can he not talk only shout WTF?

[@d3po455]

Just find someone to weld it. 🤪

[@jeremylivengood515]

Was Paul in the WWE

[@timmyo571]

What size adhesive gun do you need to apply epoxy?

[@danbarone7643]

4 to 6mm thick ?????!!!!!! Bull! You would think the producers of these how to’s would check that the information given is correct.

[@bartgoins1782]

I made it 2:25 of the video. Wearing headphones and hearing the guy use his WWE voice is too much.

[@Grnfinger]

Why is the big boi yelling like a fool? Calm down dude and just talk normal. Will make it hard to watch anything more because i geel like im being screamed at and it grates on me

[@Utubegofukurself]

"Cab cobbling without a welder"

[@martynrollinson]

WHY'S HE SHOUTING!!!!!!!

[@tomcoryell]

So why you gotta yell at me? And why no flange?

[@bobbyshaftoe]

wait... a 3700lb glue is "about as strong" as a 37,000-77,000psi steel weld? Uhm.. No.

[@thomassenemounnarath3278]

Blocking down that fiber glass filler with no mask?!!!!!! Brave man.

[@mikekohut203]

Just buy a welder with the money you save not buying the glue