Richard, your videos are great, but what impresses me the most is your love and respect for your wife.
@richardteresacricheducatio35423 ай бұрын
Thank you very much
@jasontexter17213 ай бұрын
That's Mrs. Teresa **
@okcantbelieveit2944 ай бұрын
Forgot something? At least you remembered what you’d forgotten! I stand in the middle of the garage wondering what the heck I’m doing there! 😳
@ronwade22064 ай бұрын
You too? 😅
@badcommentbot83494 ай бұрын
Me 3
@totallybonkers3 ай бұрын
You truly are God's gift to transmissions!
@Kodi52043 ай бұрын
Man I forgot you came back to KZbin. Made me so happy love it man
@TheBudliner2 ай бұрын
Good to see the master in the shop
@GregCollard-cq5yg4 ай бұрын
As i have ask before, please take us racing with you. I might be a pain but I'm know i would enjoy watching and I'm sure you would get more subs. Thanks guys.
@barrybaker96774 ай бұрын
I'd definitely love watch it. Love to see the dirty bird making pass
@bill8by54 ай бұрын
Good to see Cody again!! As always, an informative discussion with exemplary video - thanks to Teresa!!!! Keep 'em coming ya'll!!!
@richardteresacricheducatio35424 ай бұрын
Thank you
@jimmyford7964 ай бұрын
That’s one thing I really like about Richard he will go completely through a transmission and inspect every part.
@billjenkins14164 ай бұрын
Do you know trans techs that don’t? 🙄
@jimmyford7964 ай бұрын
@@billjenkins1416 not personal but then again I only have Richard work on my transmissions.
@MrUbiquitousTech4 ай бұрын
@@billjenkins1416 aamco
@billjenkins14164 ай бұрын
@@MrUbiquitousTech really? Every employee at every Aamco? I find that hard to believe… they have been around for quite a while 🙄🙄
@MrUbiquitousTech4 ай бұрын
@@billjenkins1416 Not only every one there, but even any that walk by their shop!
@philip4x4guy4 ай бұрын
I would love to hear your thoughts on fluid types. What do you fill trans with? I'd also love to hear your take on trans maintenance and how to best drive and maintain to make it last!
@gillboardman89984 ай бұрын
Really good to see Cody back. He went above and beyond for me at Precision and i appreciated it very much! 😎👍 Greetings from sunny and hot Eastern Washington.
@LVCMS4 ай бұрын
Agreed nice to have Cody back😊
@dgmcke30744 ай бұрын
I wish your son would come back to the winning team
@josephd.48904 ай бұрын
Cody managed to come back into the fold I see
@Cross_The_Line4 ай бұрын
I've always been around and always a call away when he needs help I haven't gone no where.
@scotthultin77694 ай бұрын
First 👍's up PT thank you for sharing 🤗
@pinkymccauley74804 ай бұрын
that dip stick looks long, could it be he doesn't have enough fluid in pan ? (short tube, dip stick to long pushing stick into pan to lock stick in tube, thus reading full when it might be half full)
@richardteresacricheducatio35424 ай бұрын
Thank you for pointing that out. I will look at that with the pan off.
@nickheiland33974 ай бұрын
Richard I saw on a video and thought it was a great idea to do on all valves. Put it in a drill and spin it. If it's not perfectly strait like a valve in a engine that's gonna be an issue. The trans was a 400 and didn't have 3rd gear. It was the long valve in the pump where the pressure regulator valve is. In the drill it wasn't straight. Looked straight to the eye but got stuck .
@lanbrick58263 ай бұрын
Wonder if his linkage is off from shifter to trans , Vibration moving cable back and forth??? I know everyone is an expert 😂 Always great videos Richard!
@alkennedy11243 ай бұрын
Call up mikes transmission,out in palmDale California, his rules the powerglide west, 10.000 hp top fuel tested, he has the tricks,, thanks BigAl California.
@neilkirkes4 ай бұрын
Thanks Richard and the gang. Has to be in the valve body if it’s a shifting problem, right? Would it do that if a spring was too strong for 1-2 shift and at low rpm the pump wouldn’t be making enough pressure to overcome the spring 100%. Making the valve bounce?
@Carcrafter71654 ай бұрын
Thank you both for sharing this video. I hope the dump valve on the valve body is ok.
@metrickarma4 ай бұрын
thanks for the upload! Always learning something
@lawrencehalpin66114 ай бұрын
Thank you for the video. Very good of you to educate everyone . Kind regards.
@francisbeaudry85983 ай бұрын
from quebec very good vidéo merci tanks
@pab8924 ай бұрын
good morning. when I did transmissions the powerglide had manual shaft that always needed to be adjusted by bending the actuating lever. I did not see you check the manual valve end for adjustment. Just a thought 😀
@richardteresacricheducatio35424 ай бұрын
Yes, sir I always check that when I assemble it back
@pab8924 ай бұрын
@@richardteresacricheducatio3542 thank you for such a nice reply I just love watching your video's since i got too old to crawl around and remove transmissions so I can rebuild them and I stopped after the 4 speeds. Thank you for continuing on since you closed your shop.
@markperry7624 ай бұрын
Annie girl in the house❤
@shadetreemechanicracing224 ай бұрын
I have a powerglide to rebuild. I found half a spacer bearing washer? In the pan. It still works though.
@jeffrowlan98774 ай бұрын
please include some videos of the dirty bird runs
@jimmungai19384 ай бұрын
On these new vehicles, how hard would it be to put a drain plug in the torque converter? That’s what I liked about my old Mopar from way way back when you could drain the torque converter too anyway this is six in a row.Jim from Kennerdell PA
@billsmith22803 ай бұрын
Richard you have great videos on the fca gm and ford trannies when are you planning on a video on the automatic transmission that’s in the Nissan titan with the 5.0 Cummins that I hear there’s no parts available for short of buying a complete dealer new transmission or do you have a after market supplier for those parts
@MRosati50003 ай бұрын
How about those dirty bird wheelie's looked cool!
@archeryhuntermike67013 ай бұрын
What happened to your original channel?
@v1-vr-rotatev2-vy_vx314 ай бұрын
Wondering what the oil pan looks like when it's been dragged around so much
@MarkDeazevedo2 ай бұрын
Was wondering if I could run stock valve body but don’t use the throttle valve or kick down however you wanna call it for the powerglide or do I have to block that valve for it to work I only need 1st and reverse for derby car
@Kodi52043 ай бұрын
I’m always confused what do the bands actually do?
@davidtrisha14694 ай бұрын
👍 good afternoon
@iamnoone.4 ай бұрын
I have a 2012 ram 2500 cummins. Is there any way to get rid of the flair in the transmission. Sometimes, it seems to last too long.
@anderleof4 ай бұрын
...issues...plural is not possessive.
@davidreed60704 ай бұрын
Do you guys know about ftealshow converters.?
@brianmiller9094 ай бұрын
I got a 85 c10 longbed tht I ls swapped n put a th350 short shaft behind it n I need a 74 n 3/4 driveshaft do I think I could do a 1 pc or have a 2 pc made?
@richardteresacricheducatio35424 ай бұрын
Unfortunately, I pull the 350 back out and make it a 9 inch and you possibly could get away with a long drive shaft like that
@brianmiller9094 ай бұрын
I’ve done everything but pull apart a tranny never messed with them just installed them
@davidreed60704 ай бұрын
You should have a camera person when you race and post it.it would be a shame for you to do all that and the shifter be out of adj.
@snakep1664 ай бұрын
have trouble believing that you can't buy a bs vehicle for 500$ and get a corporate sponsor for a build video. Tear down videos are past getting old