Building a 4-Link Suspension to Conquer the Trails - Carcass S2, E6

[@michaelele1257]

Out of all the shows on the channel this is definitely the best one. Keep doing the crazy artistic stuff you guys do.

[@daroch3694]

Parte 2 xfa. Saludos

[@LukeEdward]

It really is cool to see the progression from the “rather exuberant” guys from the early episodes, to the respected craftsmen we see today. Jimmy, Jeremy, thank you for letting us appreciate the skill you guys possess, and #Powernation thank you for letting these guys become who they are today. I know that I will appreciate the #Carcass show for years to come.

[@greengeeker1]

Thank you for the reformat. Took Carcass from a show I couldn't stand to watch (with the reality tv vibe) to one I can't wait to watch.

[@danf4616]

+1 Yes, like the show much more now. Painful to watch before.

[@jirivelcovsky7727]

Nice, this is power of USA people, make America great again. Hello from Europe

[@daveg5847]

Y’all r the og of car building..1.2mil subs is a shame… there wouldn’t be a us without yall

[@MadAlhazred]

THC keeps me at the optimal height too.

[@JsGarage]

Thought the same thing when I heard that 😆

[@bradleydennis1263]

Facts.....on a multiple times a day basis!!

[@jonathanshoemaker3702]

@@JsGarage jjjjjJjjjjjjJJJJj if no

[@drewlord6525]

420 blaze it

[@electrontube]

the slot-and-tab design you can build in with the CAD software really shines here. this is just well-thought design meeting experience.

[@hemihead6645]

I've always wanted to build one of my own. I hope you guys are available for tech support over the next 10 years.

[@GULAG-vb6fy]

Glad to see deadheads still around.

[@adamswiger9499]

Deadhead from Virginia right here!

[@aaaccc1598]

Props for actually giving a quick shot on what the welding machine was set at. 👍 The reason I just subscribed.

[@electrontube]

this is how you can tell if they understand their audience.

[@fsarfino]

Loving all the fabrication on this build !!!!

[@FJTovar]

Well, I hope you don't forget to put a top reinforcement bar on the shocks hoop, because all that tension from the shocks will bend the chassis inward. And the brackets for the axle links seems too weaks. YOU GUYS KEEP ON MOVING, EVERYTHING GOES VERY WELL.

[@joetuktyyuktuk8635]

When welding near machined parts, especially with MIG anti-spatter spray is your friend. Also when welding near threads its a good idea to thread the piece in before starting... make sure your ground doesn't transfer through the threads.

[@pierreduplessis1507]

I enjoy builds like these. Would like too see how it turns out.

[@trevor7290]

I wasn’t even planing on watching this video but holy hell this is informative and interesting I love this channel man

[@rsdaarud]

What a blast! Killer shop and suspension masters!

[@muniac_llc]

This is a great video. Thanks for doing it. You do create very nice welds with your technique and setup. The camera shots of the welding are also very good. TIG welding has an artistic aspect to it. When the helmet goes down all else goes away except the puddle.

[@Versatech17]

The production and effort plus knowledge. Respect

[@BrianSmart1959]

I get the feeling you guys like that plasma table.

[@anthonycomini9991]

I enjoy these videos so much!! I feel like I learn more here, then when I was in school

[@hakuaakash3823]

Thank you guys, from you I got lots of knowledge about automobiles

[@Onethirtytwo]

Now about a mile of weld bead to hold it all together!

[@BladeRunner.43]

I COULD BINGE WATCH THIS CHANNEL ALL DAY!!

[@abalansampuri5063]

I really love to watch your videos... I can learn more about how to build something with using a right tools and do it right way... Very helpful... Sorry about my bad english... Hope you can understand.... 😅👍

[@barteaumotorsports8909]

Been nice to stay with basics and talk about the geometry more , less I’m welding and cad stencil ,

[@WPowell420]

You can’t run a steering box with a triangulated four-link front suspension; you’ll have uncorrectable bump steer. You either need to run full hydraulic steering, or run a three-link with a track bar.

[@zach_94]

@Leo Coffy lol

[@dumbestoyster]

What? These guy's are pro's

[@WPowell420]

@Leo Coffy has nothing to do with grip and everything to do with the vehicle being unstable on the road

[@WPowell420]

@@dumbestoyster apparently not

[@gettinbentfabrication9137]

Wrong yes you can I have a few you have to do a bell crank set up for the steering

[@454Whitey]

You're going to have crazy bump steer with that front 4link set up. You need to run full hydro steering or a track bar with that mechanical steering.

[@That_Handle]

🤔🍻

[@frankdehne1949]

Might as well do Leafs in the front at least if you're going to have that steering set up

[@BigTireGarage]

Yep....they could of easily done a proper three link setup.....but those who know....know. And those who don't know....well.....

[@SimoColes]

I thought they were doing a whole hydro setup

[@DiversifiedFabWorks]

Exactly what I was gonna say then u already did😂

[@MichaelDurig1]

I gave you guys crap on the Trailblazer project because you used a SS model. There are a lot more 6s running around that are affordable and plentiful. However, this build makes plenty of sense and I am enjoying it. Good job guys.

[@fordfairlane662dr]

I am about to go postal!😄😃😀😊☺😉😁😂

[@zach125b]

First episode I've ever seen and reminded me of those shows on speed I watched growing up

[@kennyrodgers1010]

Nice work! Looks great. I’m building a 1978 Jeep Cherokee Chief the same way. Just waiting on my shocks from King.

[@johnv.cramer3008]

Looks like you guys have a lot of fun.!!!

[@bstsmanufacturing]

This show is the nickel back of automotive shows.

[@gotj]

Después de ver esta chapuza, no me extraña que en las ITVs miren los 4x4 con lupa.

[@saijuakshaya1983]

Unity giving power for couple of suspension

[@dannychiguina3962]

Great Work guys

[@matthewskaggs3792]

I would have built a different crossmember with clearance for the link bars, I mean you do have a CNC table...

[@That_Handle]

🤔🍻

[@johnsmith-qz4bv]

nice work guys

[@robanderson6009]

Did the plasma table come in handy? Idk if they said it did

[@bigredracer7848]

13👍's up thanks again for taking us all along with you

[@bigredracer7848]

I had one with a 454 ci big block Chevy in it for the street

[@MrIvanek]

Great work can’t wait for the next update

[@shanecodman1842]

Kick ass build make vehicles great again. Flat earth crew

[@HerculanoLemos2022]

Good day friend...good job...👍👍🇹🇱🇹🇱

[@Rust_Belt_Fab]

I’d like to see an detailed episode for setting up the gears in those axles.

[@elmerfudpucker3204]

They sure have a good sponsorship of Dippity-Do

[@zach_94]

lol good one

[@vardfriki7274]

I love to see what you guys can do with a J10!

[@stevenjennings8347]

Awesome informational educational video experience Y'alls God Bless Ya 🙏

[@craftyukraine]

I've subscribed to this channel. You definitely deserve more subs, than the mainstream youtubers.👍👍👍👍👍👍👍👍👍👍

[@PatrickKQ4HBD]

17:30 You left out ORI's air struts. They're the best in the business! Off Road Innovations. Only downside is they're backordered quite a bit.

[@jonstrande2074]

This is a sweet build.

[@vincefairleigh6899]

Awesome video, how’d you make sure the axles were completely square before measuring for control arms? Plumb bobs? I’m assuming that the frame was leveled before any plumb bob was used? How about the axles caster? It’s safe to assume that you positioned the axles at the optimum position first? I’d love to do a build and am in the metal trades, you are all awesome! I’m curious if you got sunburns from welding without sleeves?

[@joethepirate1]

I love this project!

[@joshuahaddox3609]

I think I understand quantum electrodynamics better than the suspension physics.

[@517kdub]

How are you going to run a triangulated front 4 link with steering linkage? You'll probably need full hydro steering

[@Demon_Mx2277]

How did you find the anti squat line? So confused on that process. To me it looked like you just picked a random location near the wheel center line.

[@robertfoley6430]

How are they getting to the nuts for the fronts rear upper mounts??

[@robert-vt1fq]

You got to get it did a really nice job that juice will look very sweet

[@garrettdouglas2609]

Cleaning the axle housings and not the frame is crazy

[@Eduardo_Espinoza]

Awesome educational content! 😎👍

[@ph3n1x77]

If you guys want to get to the 1million subscribers you need to do more give a ways. It doesn't half to be anything huge, sometimes its the little thing that go along way. And don't forget about your northern neighbors. That's right people from Canada watch your stuff and we want to be included. If you stop giving away whole cars and gave away some car parts people might be more inclined to watch. Also I thing anyone from Canada would gladly drive down to the USA to get one of your give away cars so don't count us out. Anyway just giving you some thoughts. Love the show keep up the good work and plz do some more third gen Camaro stuff, I have one with a 350 swap and your third gen videos were a nice surprise, BTW there making a huge come back right now since the alleged Camaro discontinuation

[@Larry-qh2kp]

they did it without give aways you slacker

[@Larry-qh2kp]

they did it without give aways you slacker

[@kyledunham1978]

What is the coilovers they used i was hoping they'd go into detail about them but nope just heres want we got lol

[@wv-dixie6374]

This is all a dream too have this done to my junk truck maybe one day but itd prob cost more than imma pay since i dont have tools or friends to help me do it!

[@hakuaakash3823]

You guys inspire me

[@cliffcampbell8827]

Maybe knocking some of that rust off before you complete your build might be a good place to start...then a quick stay over at the powder coaters or just about any place that will apply some kind of corrosion resistant material to that chassis.

[@tigernicelava5642]

Thank you for sharing your video I get great ideas

[@dodihsupriyadih9281]

❤❤❤ Salaam dari Indonesia

[@tomconner5067]

Altering the wheelbase effects the engineered steering Ackerman, unless you adjust the width accordingly, or alter the steering knuckles.

[@cheif10thumbs]

CAD - Cardboard Aided Design

[@maxadkins3870]

I'm sure the average car/truck enthusiast doesnt have a clue exactly how much knowledge is needed to do a build like this...i mean just the amount of knowledge you need to have to be able to use the tools needed is allot....not to mention actually building it.

[@Poizdrc]

4 link front with a chassis mounted steering box? How do yall plan to combat bump steer?

[@Aktaviuschannel]

Great job!!!

[@mccwho]

nice video !!! Please some more info on anti-squat and CG relationship, theory design. Where did you get this info and where can I get it? Why didn't just run a parallel set for hydraulic/mechanical steering like in the 4500 class Ultra4 cars? The best of both worlds.

[@llspragulus]

Will you guys be gusseting the hoops for lateral support?

[@robormiston2841]

Are the doors going to clear sliding past some decent tires?

[@permadifauza5251]

👌 good think .. good skill .. good talk

[@permadifauza5251]

👍 good tools

[@matthewurban9668]

They sure like pointing sponsors stuff out repeatedly that most of us cant afford.

[@craftyukraine]

You can DIY most of them in your garage. Just as we do.

[@pranays]

Why do you expect them to be broke like you? They get paid by sponsors. Maybe you would be broke if you weren't such a whinny little crybaby?

[@pranays]

@@craftyukraine you build bikes bro.🤦🏿‍♂️

[@sphillips6357]

First time I've seen this particular video series. I really enjoy this type of creative fabrication. But where can I get access to a shop with a plasma cutter? To buy and build a simple shop with equipment like they have would probably cost more than my entire house. Seriously, I wish someone would do a video on how to economically build and equip such a shop, not just how to do projects in a completed shop.

[@SopirCantik]

NICE VIDEOS

[@pauljarine]

Could you do all the welding with a 110v mig welder?

[@bengkellascakman]

Good job 👍🏻

[@banzaiib]

Doesn't that lower your clearance by quite a bit to have the center heim joints hanging down off the frame rails?

[@Sapujagadband]

Next projek, quadski

[@williamdavis7049]

How do you know the front drive shaft isn't going to hit the link? Without the transfer case in you are gonna get some serious plunge if your middle link ends aren't close to the U joints.

[@2A372C]

Dam I miss Ian Johnson.

[@BigMeepsadventures]

Same, watched that and gearz with my dad all the time after school when I was little

[@spencerwilletts9705]

*coworker* - “Hey man, how’s your day going?” *guy who loves his CNC plasma cutter* - “Man, I sure love our CNC plasma cutter!”

[@regularguyracing]

We need more hardcore rock crawling ahows

[@zip7806]

How do you determine the length of the Shock at Ride height? To make the Dummy Fab shock bar?

[@HI-rb9bl]

I didn’t know anderson copper did auto shows!!!

[@ColbyPowell93]

Good video, but throw them dummy tapes away! Can’t call ya self a fabricator with a speed read! 😂😂

[@2ndspingarage]

I pretty sure the axles will still be here after the rest of the Jeep rust to death..... those axle area built for a damn bomb.

[@ksandbergen]

Subbed @950k subscribers. To the moon🚀

[@kevinvaughn8261]

Junk mail is bad ass

[@alanrichardson7244]

Why don’t you sand blast the frame and axles?

[@bmstylee]

Because rusted is all the rage nowadays They call it "patina". The rest of us call of cheap and lazy.

[@jamesgeorge6551]

Because they are going to use some (product placement) coating you can apply directly to a mildly cleaned up frame.

[@alanrichardson7244]

@Leo Coffy me too😕😖

[@kenwalker6238]

Nice build and great info. Just curious I would like to know who makes the 2 post lift your useing?

[@smitty_1]

I'm assuming you did alot of measurements and triangulation off camera. Alot of people may not understand the significance of tacking and measuring twicet before committing to a weld.

[@TagGeorge]

At 16:36 it does not look like there would be enough room to fit a nut between the mount and the frame.

[@soldierski1669]

Later on you can see the nuts on, it looks very close, but they did it.

[@Maxxis1941]

Did you guys do an episode on the frame clean-up? If so, can you link it please?

[@sihartobing9570]

Best Job🌠👍👍👍🌠🌠🌟🌠🌠.

[@abdushaheen4499]

Its awesome I liked your video ,I'm looking for coilover suspension for my 1984 fj40 ? What do you recommend me ?

[@HI-rb9bl]

I didn’t know Anderson Cooper new how to weld!!!

[@mitchellmccormick3301]

Good ol cold weld😂