Powerstroke Gets Coil Overs

[@BecksArmory]

I designed the assembly line that builds that red transfer pump on his bed mounted fuel tank! Small world!

[@connieholdenchambers548]

Really nice looking one ton! Can’t believe it’s almost 20 years old! Great job on the new parts!! I’d drive it for sure!!! ❤️

[@drewbucketsful]

“Don’t pay too much attention to him, and he won’t bite ya” 😂😂😂

[@febeleven]

I like how you explain how stuff works! Sharp looking Ford!

[@dollface540]

Kick ass video guys! That truck is clean, great job. 💯👌👍 I really like all the break down you did in this one. Explaining everything and how it all works helps the next person, I love that you did that. Thank you!

[@fijatogur]

You know you can go through the videos without all the explaining.. BUT please DO NOT STOP It's makes for more than just a videos it's a lesson/class/teaching.. several ideas come from knowing how the different things actually function, what their purpose is and so on. Keep keeping on we are riding along with you [notepad ready whenever you upload lol]

[@dan725]

man I learned so much about just suspension bits from this video alone. Knowledge kings!

[@iamthebest215]

Hell yeah brother! Love hearing the Schaeffer’s love.

[@DougGleich]

Can you introduce the guys/girls ya have working on all those projects? I know you Holden boys have amazing people to help build your business!

[@stevehall2239]

Great content guys! Loved it!

[@1ken.cheniergmail]

This is a beautiful setup !!! Would it be possible to get a parts list ?

[@gregorderas5296]

cant lie. i love the ft four link and rtls on my 03.

[@bobbreit5244]

I would like to have seen your measure points. Can you put a level on the bed rail to check? I just put a coil conversion in my H2 from being inspired by yer work. 🤘

[@conmancollins1176]

awesome vid and truck

[@garymessina1609]

Wow that truck will definitely ride much better great video thanks

[@weedfreer]

oh man...this TOTALLY needs doing on the Cuda also. I never knew they did kits like this...actually said to Muscle Rod shop guys that it'ld be awesome if this could be done about a year back. They said it'ld be the dream, although, they never went that route eventually it would appear. 😓 My thought was that it'ld make it a bit like that desert racing Porsche they did a while back...which would be AWESOME! 😅

[@Weekendprojects1984]

Man I need this for my 04 excursion.

[@Sstyyxx_]

Looks good

[@jacobwebb768]

Can I use that kit to 4wd swap my 03 f250. What front axle do you recommend?

[@killacali4283]

Would that kit work on a 1995 f350, if I get those super duty axels

[@Sonny_P53]

What do you charge total for a set up like that? Have an 02 7.3 Ex

[@juanmendoza3213]

what state are you guys in ? also how much to install the 6" full traction coil over on a 2003 excursion 4x4 7.3

[@frankallen8440]

What was the total installation time?

[@korn111685]

Nice!

[@trav22trex21]

Is there a similar kit for a 95 powerstroke? Without an axle swap?

[@crwmoto6234]

There’s an 03 6.0 stick shift centurion at a dealership ship near me with 80k I’ve been wanting it forever but they won’t drop price even though it has many suspension issues and a few wiring issues with the trailer system

[@BrainsofFrank]

Cash in hand to cover the price you want to pay. Talk to them and be like I got money in my hand for this truck at this price. Don’t want to trade money for the truck well here’s my number and call me when you are ready to sell for this price, oh and here is what it will cost me to fix the suspension and the wiring and then shush and see what they say. Don’t be afraid to walk out with your cash still in your hand that day.

[@robertstarnes639]

How much for the conversion kit for a 2004 automatic, 4wd??

[@markroper9269]

Sorry, but I need to a$$ a question.... 😋 Good looking truck! Nice work!

[@leemckee1272]

Does the turning radius improve if you keep the 2003 front axle instead of swapping to the 05 axle?

[@travelerwithpurpose9132]

You have a link to find this kit?

[@danielkampfhenkel7993]

This video has been out a while, but I want to know if this kit will work on an 04 Excursion with the 6.0?

[@jbcontracting2255]

Where are you located ? How much you charge to do the coil over conversion?

[@dalegereaux1863]

Nice work on that truck ! Wait a minute, what are you guys doing working on trucks when you're supposed to be finishing that building ? ! ?

[@rhyswilliams695]

Nice. Time for some new shoes.

[@launceherron]

Awesome

[@AngelGarcia-er5zh]

Where can i buy this suspension?

[@jimren5638]

My understanding has always been to never EVER stack blocks on leaf springs. Y'all sure that's OK on this one?

[@MarkRenn]

Did you not wash the frame before bolting those new pieces on? Won't that become a magnet for rust?

[@coletonjackson3159]

It’s Texas. Too dry to rust

[@GusgusA1]

What years?

[@lonestaradventures1862]

I desperately need that conversation on my truck. I have an 03 f-350 single wheel just like that. I want y’all to do it for me, no doubt

[@DrunkBunnyKiller]

Mango Monster Supremacy

[@robertworel5791]

Alright. That truck is so desirable.

[@geraldfiorello6231]

What did it cost for conversion and installation $$ ? I just started watching y’all , where are y’all located ? I would like to see about your shop doing this same conversation to my 2001 F250 ?

[@nicholasgalonski99]

Full traction suspension

[@alb2571]

Graet job guys! You think this could be done in same year excursion?

[@holdenbros910]

Sure can. We have done some excursions!

[@alb2571]

@@holdenbros910 I'll start looking out for those parts, thanks a bunch

[@everydaygameclips]

love you vids and remember Lets Go Brandon

[@BRobberson]

Do they have a conversion from leaf to coil for the rear of a 07 F250?

[@gregshue645]

No but they have a badass torque link rear suspension kit that you should look up. I wouldn’t put coilovers in the rear that defeats the whole purpose of the truck.

[@TheRoadhammer379]

MADDOG KUSTOMS makes a rear coil over kit for the superduty

[@brandonanderson6843]

Wish my 00 4 door short bed 4x4 was 6 speed

[@bryanc5540]

Will y’all be at Bristol?

[@holdenbros910]

Yes we will be

[@christopherwedemeyer2993]

Leaf sprung front ends are better for towing, and, NO DEATH WOBBLE!!

[@keithvnumber1]

Your knowledge is famazing

[@keithvnumber1]

Also are you moving everything including lifts and tools and any parts or equipment being stored? Or are you using both shops and getting new lifts, tools & equipment?

[@rickysmith8099]

Looking awesome now all it needs is bigger tires

[@skipman8yard]

Great lift kit Holden Bro’s could i send my 99 f350 over for you to fit that kit on I’m in England 🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧do you think the shipping would be much money 💴😂😂😂😂😂😂😂 great vidj Bro’s keep them coming please 👍👍👍👍👍🤘✊💪😎🏴‍☠️😎🏴‍☠️😎🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧

[@MadDawg91108]

Why go thru the expense and hassle of installing a 4 link front suspension and then just double stack blocks in the rear? That job is only half done.....

[@anthonyfigueroa7869]

Shouldn't be to far away u do a podcast 😆😆😆😆😆. You have the personality for it.👍👍👍👍

[@karlfair]

How much does this conversion cost?

[@christopherwedemeyer2993]

Six to seven grand.

[@karlfair]

@@christopherwedemeyer2993 Thanks

[@nicholasgalonski99]

Full traction suspension

[@RobertLee-lf5by]

What is the cost

[@nicholasgalonski99]

Full traction suspension

[@whysolong27]

Bolt in place then say fuck those bolts. Weld every thing in place .

[@brokenwrench404]

👍🏼

[@TheRoadhammer379]

bullshit, welds break, your welding skills are not guaranteed unlike grade 8 bolts.

[@whysolong27]

@@TheRoadhammer379 sorry my welds don't break

[@whysolong27]

@@TheRoadhammer379 like bolts don't. I have broken many over the years

[@USN_Ret-]

Yo.

[@neoncatfish4038]

If your back end in is always running high, which means you are always running downhill!!! Which is turn safe fuel!!! Right!! 🤔 Lol

[@dalegereaux1863]

You are correct ! Gravity, it's not just a good idea, it's the law. 😏

[@Visible7777]

I know each of us want something different from you, but I'd like to see the work rather than have you explain each part.

[@aquilaaudax6033]

✋🏼🇦🇺👍🏼

[@stanschmitz5566]

Man, I would much rather work in a bright white shop interior like your current shop, than the black painted walls of the new shop. Just sayin'.

[@holdenbros910]

Our new shop will be much brighter then the current one. 4 times the lights. Bright floors and walls will be white wainscoating up the walls 8+ feet

[@stanschmitz5566]

@@holdenbros910 Sounds good.

[@thedivinemissm7795]

@@holdenbros910 Did you ballpark the total package cost $$ ?? Would be helpful to know what the price range of that kind of work comes to... Why don't you answer your viewers all wanting to know what that costs ???

[@danielj2839]

.

[@warrengrumbley3679]

maybe ramble less and show work more

[@ALBERTAPATRIOT780]

I use the word “stout” regularly now after watching this channel! Awesome videos guys!! 🫡

[@anthonyfigueroa7869]

Shouldn't be to far away u do a podcast 😆😆😆😆😆. You have the personality for it.👍👍👍👍