Beautiful lady, I just found the blog you posted on 07/18/2020 "What is the difference between Embrilliance and Simply Applique. You did a great job explaining it, it answered all my questions. Thank you very much.
@yvonnerouse2953 жыл бұрын
Enjoyed the video. I just purchased the S n C 330DX n need to watch as many video to help me. Also, I’m still learning BES4. Thanks for the video. I hope you do Quilt Diva in 2022.
@susandt38563 жыл бұрын
Another well trained human! We love our fur babies.
@suehunt58963 жыл бұрын
Hi forgot to say I would love the orange rulers. So many great tutorials. Thanks so much.
@stephiepeterson3 жыл бұрын
I think I was as excited about your success as you were. It’s very cool how you made technology work for you!
@valeriecorteville2743 жыл бұрын
Thank you for your great videos. Just got the Scan & Cut 225F and now I need Simply Applique!!
@sandytownsend98783 жыл бұрын
Thanks again for another great video. Love your owl! You make it look easy. Thanks for showing us how to do the whole process
@PowerToolsWithThread3 жыл бұрын
Glad it was helpful!
@juanavacollins70933 жыл бұрын
Love how you used the machines & software together. I’m still learning the ScanNCut, Disney 330, and this was very helpful!
@margienell44013 жыл бұрын
Hi Becky, you are an inspiration!
@coreyfisher31673 жыл бұрын
Great video, thank you. I'm asking for simply applique for Christmas, fingers crossed.
@jillcaperton15683 жыл бұрын
Great video. I seriously want a new Scan n Cut and Simply Applique. You make it look so easy. Thank you for the video tonight.
@PowerToolsWithThread3 жыл бұрын
You are so welcome!
@Pizzadili3 жыл бұрын
Thanks for the lesson ! Such a Good dog!!
@ettakaynickel61483 жыл бұрын
Thank you for video. You are Becky of Power Tools with Thread!
@PowerToolsWithThread3 жыл бұрын
Thank you my friend!!
@debbierybarczyk56113 жыл бұрын
Wonderful video. A scan & cut is on my wish list.😊
@alluraromel3923 жыл бұрын
I need to go find your SNC videos & watch them. I bought the SDX225 used from someone who wasn’t using it anymore. I got all her tools, mats, vinyl and transfer tape for less than was it’s on sale for at all brands. 😃 I used it to cut my appliqué pieces for my OESD Turkey, but I still had to cut some excess fabric away after it was stitched down. It would be so wonderful if I didn’t have to do that. I also used it to try & cut appliqué pieces for my Frosty the Starman I’m currently working on. But some of the fabric is fraying when I peel it off the mat. I see you used a low tack mat vs the fabric mat with the thin fabric blade I’ll give that a try. Thank you again for another wonderful video. When Frosty is done I’ll be sure to post him in the FB group.
@PowerToolsWithThread3 жыл бұрын
Wow! What a deal on a SNC! I love finds like that. I'm with you...trimming after a tackdown stitch just isn't fun so the SNC does all the work and it's wonderful. Fraying can be alleviated somewhat by starching the fabric first and then really adhering the HNB into the fibers of the fabric...it kinds of glues them together prior to cutting. I leave the iron on the back of the fabric for 8-10 seconds before I peel off the paper.
@dubravka..K3 жыл бұрын
Hi Becky! You are so talented ! Love your videos❤
@suehunt58963 жыл бұрын
Love the owl he is so cute. Your SNC info is good I need to watch more you them I have the CM350 and want to cut fabric with it. Thanks so much for all your tutorials it helps a lot. It looks so easy all the things you do and I also like the way you leave some of your mistakes in the tutorials it helps us know everything just doesn't go perfect.
@PowerToolsWithThread3 жыл бұрын
I have the CM650 at our coastal house. It's almost identical but you just have to do a depth cut test first and you'll be fine. :) Thank you!
@suehunt58963 жыл бұрын
Hi, What do you put on the back of your fabric? I have the paper they first told you to use on your mat but not sure what to use instead of that. Seems like you have an easier way. Like your orange rulers. So many projects so little time. Thanks for all your info it is so helpful.@@PowerToolsWithThread
@merrilynblackmore69623 жыл бұрын
I finally got embrilliance (sp) now have to learn how to use. Will be digging through your videos. Love your info. Miss hearing you say that’s my blog but you must have your reasons! Sending hugs for the Christmas seasons and big thanks for all you do!
@barbaramangel66943 жыл бұрын
Hi 👋
@kathykumler15422 жыл бұрын
Becky has a lot of great videos on Embrillance and everything else!
@sandikae76823 жыл бұрын
Right now I’m working on just pieced quilts and a Kimberbell project, but am intrigued by the Simply Appliqué techniques. I do have BES4, but have not yet loaded it on my new laptop. Think I’ll have to do that☺ thanks fir another great video.
@davejohnson25003 жыл бұрын
Great job. It is so nice to follow along with you using this new technology. You make it look so easy! Love it
@maryhebert18043 жыл бұрын
I really really need to learn to do this, thank you for sharing your knowledge, I check out your other videos
@kathykumler15422 жыл бұрын
Becky, the cricket mini iron link wasn’t valid. Could u check it?
@tammycushman87883 жыл бұрын
Becky I noticed your ironing pad in the video. Have you seen the Press in the Hoop pads from Embroidery Garden? The are really great. Love the new sew along.
@rosemaryseebeck80352 жыл бұрын
Hello, Late to this video. Can anyone tell me if the Brother ScanNCut DXSDX85 will work with the Simply Applique Software or do I need a higher number ScanNCut?
@PowerToolsWithThread2 жыл бұрын
It should. All SNC machines create the .fcm file including the SDX85. Then you'll import that fcm file into Simply Applique and you'll be off and running!
@Nunya-biz-ness Жыл бұрын
Thanks for your videos. Do you know if you are able to add additional fonts into Simply Applique? Or is it limited only to what came with the software? Thanks.
@cherylgrider7593 жыл бұрын
What is the same of the quilt?😊😊😊😊 Which company sells the pattern?😊😊😊😊
@laquettakruse4852 жыл бұрын
Hello Becky, and power tool followers, love your videos, getting braver with my machines. Pr1055x,xp3,se625, and sdx330d Was wondering about a good software, like the easiest, ever, that will be best with my power tools, to start with. Also looking into a longarm, suggestions, like brand etc?
@PowerToolsWithThread2 жыл бұрын
I always recommend Embrilliance Essentials to begin with because it's so user friendly and not very expensive to get started and begin to learn. bit.ly/3xPLzoQ As for a longarm, best bang for the buck is the Grace Qnique 21 X Elite. Fabulous customer service too. (I'm a Grace Ambassador so I'm partial) :-)
@cheri28413 жыл бұрын
Becky would these techniques be possible on your Quatro Innvo Brother sewing machine or is it too old?
@cheri28413 жыл бұрын
Sorry this video is Use Simply Applique (BES4) and the Brother ScanNCut in Quilt Blocks!
@k9smomnm3 жыл бұрын
I am slowly learning my Scan n Cut by watching your videos. I have the SDX85. It seems to do everything it needs to. It has wifi and I can transfer back and forth no problem. It just has very few built in designs compared to the others. What I need to know is do you have to have the scanning mat to scan things into the machine or can you get away with the cutting mats?
@PowerToolsWithThread3 жыл бұрын
You can scan paper patterns using the low Tech mat which is turquoise colored. But I prefer the scanning mat because it keeps all of the Fur dust and fuzz off of the mat.
@k9smomnm3 жыл бұрын
@@PowerToolsWithThread Thanks! My grandkids and I are going to create some Christmas cards using the scan feature this year! They will draw some Christmas things and we will scan them in and cut them out and then glue them on card stock! I think it'll be fun!
@nancypage80613 жыл бұрын
That is awesome!
@sherrymurphy54483 жыл бұрын
Could you tell me the exact scan and cut you have please
@PowerToolsWithThread3 жыл бұрын
SDX225F is the one to get! www.allbrands.com/products/98318-brother-scanncut-sdx225f-12x24in-scanner-cutter-2
@sherrymurphy54483 жыл бұрын
Thank you! Your videos are awesome! I’m a visual learner and you have helped me leaps and bounds!!
@55sister3 жыл бұрын
Do you know if the Simply Appliqué will work with Cricut?
@PowerToolsWithThread3 жыл бұрын
No, it will not. The method I used uses an .fcm file and Cricut doesn't recognize that.
@55sister3 жыл бұрын
@@PowerToolsWithThread thank you, I watch your videos all the time, I’ve learned a lot from you.
@jean-claudelelons97593 жыл бұрын
Awesome video!! Is it possible to import FCX files from Canvas to Embrilliance?
@PowerToolsWithThread3 жыл бұрын
Great question! Embrilliance does not allow you to import FCM files so you have to use Simply Applique and then save to an embroidery format that Embrilliance will allow - PES in my case. Simply Applique won't allow you to remove (or add) certain stitches so if I wanted to do a raw edge applique (get rid of the final satin or blanket stitch), then I import the saved file into Embrilliance and delete it there vs. just skipping over it at the machine. I use these two programs as compliments to each other since they both do different things that the other will not.
@sharonwight84973 жыл бұрын
I can see why u would be invited to teach at quilt shows I would pay to take a class from you if i lived close enough
@PowerToolsWithThread3 жыл бұрын
Thank you! :)
@vickijeanne99583 жыл бұрын
Hi! I want to buy the seam ripper/stiletto that Keith makes but, unfortunately, saw all the colors are sold out, ugh! Is there a date when some will be available? Thanks, guys!
@PowerToolsWithThread3 жыл бұрын
I will spin some next week
@donnafields22213 жыл бұрын
trying
@roriegilbert83043 жыл бұрын
Oh yes, have to rub the belly Mama!
@roriegilbert83043 жыл бұрын
Your video was great Becky. I’m seriously considering purchasing Simply Appliqué.
@conniechamberlain12593 жыл бұрын
This stuff scares me.
@PowerToolsWithThread3 жыл бұрын
Connie, it's only thread and fabric. Get some ugly fabric or otherwise unused scraps and begin from the beginning. If you mess it up, IT'S FINE! No lives were lost and no property was damaged (except for unused ugly fabric.) :) Your machine is BEGGING you to be used. Please try and try again. :)