PPF Pro Tips - Pro's/Con's Of Bulking Mirrors

In this video, Eric goes over the pro's/con's of installing bulk PPF mirrors. Bulk is the preferred method, as you can provide more coverage, and usually go with less relief cuts and seams.
PPF Pro Tips - Pro's/Con's Of Pre-Cut Mirrors: • PPF Pro Tips - Pro's/C...
If you have any questions, comments or concerns regarding installing PPF, please feel free to email Eric at [e-mail]
To save 20% on our Car Care line use code "PROTECTED" at checkout
Find our Car Care Line here: driveprotected...
Follow Eric on Instagram: @eric_sawatzky
Follow us on Twitter: @Drive_Protected
Follow us on Instagram: @driveprotected.shop
Follow us on Facebook: @ Drive Protected Shop

[@DavidHoefer-i4c]

I always struggle with doing black mirrors, seem to get silvering in some spots. I prefer doing bulk as well. The only thing with doing a big stretch is the outside edges tend to lift up a tiny bit in some spots after it totally dries. I give you props for doing a black mirror. Most videos on PPF use lighter colors on difficult wraps. Thanks for putting out your videos, well done and much appreciated.

[@DriveProtected]

Black mirrors can definitely be a pain for sure. Silvering can be very easily done if you stretch too much.

[@Shaunstonard]

I used to hate fitting pre cut film to mirrors, this looks so much better as bulk

[@hekx1]

Thanks so much for the videos. Was gonna have someone do mine, but everyone is booked out for the summer and I need it too soon. Prob gonna fk it up but yolo

[@bees_autodetailing]

Thanks for the pointers, we’re just starting to mess around with ppf

[@gauravdhiman5950]

You did not cut the ppf… please make a video with cutting the ppf as well.Will help a lot, thanks for the video 👍🏻

[@vindexeon3562]

Saw one of your video using hot water on it, maybe should help on this as well. Thanks for the sharing !

[@Bezpokraski]

hello bro tell me what kind of film do you work with? interesting about the materials to see how you glue install what kind of film?

[@Average_Cam]

How do we get our hands on bulk Defense+ film? Keep up the good work and information. Always look forward to learning from you!

[@DriveProtected]

Shoot me an email @ [e-mail] and I can get you a price.

[@dziadziadziadzia3920]

Thanks for sharing knowledge thumb up

[@231mariano]

Thank you, very useful !

[@dhoopz1]

What do you use and How do you clean crevices on bumpers ?

[@DriveProtected]

Isopropyl alcohol, and a microfibre towel works best.

[@blacksam042379]

Do you only sell pre-cut kits for tesla on your website? I ordered a pre-cut kits a few years ago for my infiniti, but now I'm not seeing that option.

[@DriveProtected]

Right now we only offer for Tesla, but if you want to order something else, feel free to reach out to me @ [e-mail] and I can help you out!

[@jeffpoirier1184]

Can I use just water as slip solution? I have a small piece to install on a plastic fender flare on my 4Runner.

[@DriveProtected]

You need soap as well. Water will cause it to stick too fast.

[@jeffpoirier1184]

@@DriveProtected Thank you for the quick reply. :)

[@siddiqkhan4793]

Dear while fixing xpel like this in black color coming stretch mark and if not realese the material it will come back and open edges ariya after using squeeze there is coming line in ppf

[@DriveProtected]

What?

[@siddiqkhan4793]

Yes sir what kind of material using you ?

[@DriveProtected]

Defense+

[@yongkhmer1331]

I like job

[@senthamilp2764]

What company ppf you're using? I am interested to install ppf on my own car can you sell xpel ppf 60" x 20 feet, how much will it cost?

[@DriveProtected]

We do not sell XPEL.

[@JosephRicca]

What brand ppf do you use?

[@DriveProtected]

Defense+

[@artskelvin2683]

What are you using as tack solution bro ...

[@DriveProtected]

Hot water

[@rick137.pickle]

Can PPf be heated to shrink?

[@DriveProtected]

Not really no.