No video

Predator 212 Valve Lashing Part 7

  Рет қаралды 12,456

Mr. Hall

Mr. Hall

Жыл бұрын

This is a classroom demonstration of how to lash the valves on a 212cc 4 stroke engine, for more information about Panola Colleges' School of Energy Program use the link provided. www.panola.edu/energy

Пікірлер: 14
@ward26102
@ward26102 9 ай бұрын
This right here. I watched a couple of these videos. Others didn't explain how to make sure you're at the correct TDC. Or they tried to but it didn't communicate well. Now I get it. The TDC with no pressure on the valves. This is why y'all are great instructors. 🙂
@Spacecruizer203
@Spacecruizer203 Жыл бұрын
thanks for doing the hemi version cuz i hav thee Ducar Solid info right here people
@philliphall5198
@philliphall5198 Жыл бұрын
Good job Mr Hall
@greasyxxrick9132
@greasyxxrick9132 4 ай бұрын
Bro thank you for the info!!
@plesadian3
@plesadian3 Жыл бұрын
This is funny” let me show you” .. look Thru my arm .. lol oh geez ..
@ward26102
@ward26102 9 ай бұрын
Right? The camera needed a bit more elevation, for those of us that can't see through arms.
@philliphall5198
@philliphall5198 Жыл бұрын
I work on small engines all the time since I retired diesel mechanic but don’t know where or who has parts for them, can you help me with information ??? Thanks Mr.Hall
@kylesyx8432
@kylesyx8432 9 ай бұрын
Non hemi - can take a lil bigger valves ! (4mm I believe Non-hemi - has longer stroke ! (5mm)
@frankgarcia4177
@frankgarcia4177 Жыл бұрын
I am having an issue with the 212 hemi not wanting to run with the choke off. I have cleaned the carb and replaced the idle jet. It runs and idles fine with the choke on. Any Ideas as to what could cause this?
@danielhall8907
@danielhall8907 Жыл бұрын
Fuel starvation, there is a fuel filter screen that screws into your gas tank where the hose clamps on. First run some Seafoam or Marvels Mystery Oil through the tank and see if that clears it.
@collinherrmann-yt8yh
@collinherrmann-yt8yh 9 ай бұрын
still havin issues
@bradyanderson3587
@bradyanderson3587 5 ай бұрын
I had the same problem and I looked up a bunck of videos and found that I had a vacuum leak. Basically the carb wasn’t lined up with the engine right because I put an upgraded carb on the engine so I did it all myself. I took the carb off lined up the extension and it worked. You may also be running too large of main a jet
@MoHunnidzGunCollections
@MoHunnidzGunCollections 3 ай бұрын
@@bradyanderson3587same shit for me but what carb were you using ? I’m using a pwk
@allenlafever5036
@allenlafever5036 3 күн бұрын
Your arm was blocking😢
Predator 212 Exterior Reassembly Part 8
36:46
Mr. Hall
Рет қаралды 1,7 М.
Predator 212 Hemi Valve Adjustment How-To
8:54
The Gray Goat Garage
Рет қаралды 52 М.
Fast and Furious: New Zealand 🚗
00:29
How Ridiculous
Рет қаралды 46 МЛН
Smart Sigma Kid #funny #sigma #comedy
00:40
CRAZY GREAPA
Рет қаралды 34 МЛН
Ouch.. 🤕
00:30
Celine & Michiel
Рет қаралды 28 МЛН
Biggest Mistake You Will Make When Adjusting The Valves On A Generator
5:14
Steve's Small Engine Saloon
Рет қаралды 398 М.
How To Set Valve Lash, Predator 212! Valve Lash 101!
6:13
HemI Predator 212/18lb pound spring install
6:01
Black66
Рет қаралды 17 М.
Predator 212cc Valve Lash and Common Compression Issue
5:07
KartsAndParts 212
Рет қаралды 35 М.
Setting valve lash on a predator max performance 224/212 non hemi
11:10
How-To Predator 212: Step-by-Step Governor Removal
13:27
Front Runner Karting LLC
Рет қаралды 177 М.
How To Set Valve Lash on Non Hemi Predator Hisun GX200 Clone engines
11:29
The Gray Goat Garage
Рет қаралды 71 М.
212cc Predator engine 1st dyno and valve adjustment
14:24
Barry Young
Рет қаралды 3,9 М.
Fast and Furious: New Zealand 🚗
00:29
How Ridiculous
Рет қаралды 46 МЛН